Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
cool
pinball repair for you this evening we
have been working on this
jubilee pinball machine and if you
watched the first video
then you're right along with us but if
you didn't watch the first video
matthew why
where were you you should have you
should have been watching the video
watching your other videos i haven't
uploaded it yet anyway i'm just messing
with you
so our our video yeah yeah
so we did a we did a video of this one
whenever we got it in
and uh it's missing the play field
oh there it is i see it it's over there
the uh
somebody had cut all of the wiring to
remove the head and we spent the whole
video just basically fixing that so
if you didn't see it go back and check
it out but at the end of the video we
got the thing plugged in
and we finally got some light bulbs to
come on on the back box and that's the
extent
of all we've been able to do to it so
far but
like we showed in the other video this
game is coming soon
so today's the day or tonight's the
night
so i think the next thing that we're
going to do on it is we're going to work
through the bottom of this place
the bottom of this game now if you so if
you get one of these
we're trying to show people how they can
like save one that may be washed up on a
beach near them
oh yeah he figured it out matt's messing
with a camera he cannot figure out he's
got a nikon camera
he cannot figure out how to take a
picture with the thing
so there's a button somewhere that you
press here i'll show you
everybody's going to give me a hard time
he has this nice camera that he bought
so there are two mats this is this is
arcade game matt there's also a video
game matt
no cameraman camera mat video game
cameraman
knows all about cameras so if camera
matt was here he could show us exactly
how to how to play it or how to use it
but arcade game mat has no clue how to
use the damn camera there's a button
that looks like you press it and it
takes a picture but it does not take a
picture
so he can't figure it out i think the
sound's off and the sound was off
so you can't hear it take the picture so
he has now figured out how to turn the
sound back on
it's actually second hand i probably
need to reset everything baby steps that
he's getting there so while he's doing
that i'm working on the spinball machine
so anyway back to the pinball machine
uh basically
to get these things up and running you
have to go through and get
every little switch clean
and adjusted properly now i don't
if they're a little bit off whether
they're uh they
they're working but they're not quite
adjusted perfectly i don't usually
adjust them so if they're close i leave
them but you do have to clean
all of them so i'm going to go through
and i'm going to clean every one of
these relays with the game off because
there's
live voltage running through some of
them don't do that but we're going to
turn it off and
i'm going to clean every one of these
little switches so
i've shown people how to do this many
many times but
just for a uh
yeah this is a good one just for a
refresher
i did yeah see i told him i could get it
i said come come on i'm bro i'm donny's
brother i can definitely get it
get it my brother donny would figure it
out
all right so this relay here the way
this thing works is when this relay
pulls in
it's going to do three different things
because there's three different types of
switches and then we'll turn off the
game so we don't electrocute ourselves
you have this left switch here
right that when the relay pulls in
it closes the switches so it makes that
switch
connect to the other blade there so it's
that switch is not connected it's open
now it's connected it's closed the
second one here
this one it is now closed
but whenever it pulls in it's going to
open
right and then this one as well as this
one but this one
it goes both ways it's a make break
switch
so it's connected to the one on the
right right now
now it's connected to the one on the
left and it is no longer connected to
the one on the right
when it lets go it connects to one on
the right and it is no longer connected
to the one on the left
so that's how it works so to get it to
get these things going basically all you
have to do is get it where all of that
happens on every relay every time so
this switch is normally open when the
relay pulls in it will close
right this switch is normally closed
when the relay pulls in
it will open this switch is connected
one way when the relay pulls in it'll
connect the other way and open up that
way
and that's it's as simple as that so all
you got to do is get it where the relays
at when they close it makes the switches
change their state from if they're
closed they should open if they're open
they should close if they're connected
one way they should
open up that way and connect the other
way simple as that so i'm going to go
through
with a little tiny file a real dull one
i'm not going
you don't want to use like a really
aggressive file because it'll eat up all
your contacts
but i'm going to go through and i'm
going to clean every little bit of that
and get every one of those switches
clean now the the
now that one that we were just looking
at i'm not going to adjust any of those
they were all working fine
but what whenever it moves whenever the
blade moves
so like this blade you want the smaller
blade that it touches
to just barely move and this one is just
barely moving
right and see that one how whenever we
let off of it it goes back and it
touches the small one
it makes it go back how it uh
go back where it moves it slightly and
by moving it it rubs the contacts
together
and they clean themselves a little bit
but what happens is these things sit
around for forever like this one's been
sitting probably 30 years somewhere
and you get all kinds of dust and dirt
on the contacts and so they never
they no longer electrically conduct
so you need to go through and clean them
all and so the good news about these ems
is that usually you don't have to buy
many parts for them
but you got to clean all kinds of stuff
we've also got the score motor here with
big stacks of switches but it's the same
principle if the thing's closed
you want it to open up if it's open you
want it to close up
and you just have to get it where as
those cams turn around with the little
hole on it it will make the switch
stacks drop down into the
the little chip on the cam and they need
to open up if they're closed and they
need to close if they're open
so just tons of cleaning and that's
that's really all there is to fixing
these things
tons of cleaning and then the little
stepper units back there we'll talk
about here in a minute but
the first thing i'm going to do is i'm
going to go through we'll clean all of
these switches
and we're going to try to get all of
this done and then clean the bottom of
the play field too all of the switches
on it so that we can pop it back in
and uh see if by the end of the video we
can get the thing up and doing anything
so uh we'll get at it all right folks
i'm doing the score
motor here and you can see what i was
talking about
so each one of these cams has a little
some of them have a little ramp and some
of them have a little divot
you make a great thumbnail look you
could put that on your
on your video
with words why the hell would i do that
it just looks cool good
lord all right
[Music]
he did he did learn how to take the
picture it looks good
all right so as this turns
you can see that it pops the
switch up when it goes over the ramp it
makes it touch so you've got the same
exact thing going on
some of them will open some of them will
close so they're a little harder to tell
what they're supposed to do
but usually if you have any that are out
of adjustment usually it's the ones on
the very top
all right so in this one you can see
that it rides
closed the whole time but whenever it
gets around to this little divot
yeah that was it it'll fall down and
open them all
so each one's a little bit different
and basically that's all timed and this
switch closes exactly when this one
opens and all this stuff
and it's it's basically the the computer
of the
of the pinball machine um so you gotta
get all those clean and everything
same exact thing it's a if you see any
like i said usually it'll be these top
ones where somebody
pushed something in the game and it hit
it and then it way up in the air and
it's all messed up or something
so the uh usually if you have a problem
it'll be
really obvious on one of these top ones
but it could be one of the ones in the
middle too it would just be harder for
those to get misadjusted
they'd have to do it on their own
because there's no real way to really
hit them and mess them up down there so
uh that's that now i'm gonna move on to
this weird little thing in the back
i don't even know what this thing is
so i see it's got a relay up here at the
top
so this can pull in and make things
happen
and then it's got a relay down here
which is like a
score reel and as it turns around
[Music]
you've got one time when the switch is
closed this big leaf switch on it
and now the switch is open now the
switch is closed now the switch is open
this is just kind of how it does its
thing so
it must have something to do with like
putting in more than one coin
so like if you put in two quarters or
something
maybe it can keep track of it that way
or two dimes or something i don't know
but anyway you don't really have to know
all you have to do is clean it so i'm
going to clean it and
get all the switches working the same as
the other ones and then that'll be that
all right so we're gonna mess with this
stepper unit here so basically these
things
they have different steps so as the coil
pulls in on the back
it should go one way or the other so
this one
makes it reset back to the first
position
and then it steps up one position two
position
three position four position five
position
that's interesting i wonder what it even
does it must be like a coin unit or
something
one two three four five so that one's
actually working pretty good but
we'll clean it up basically we're going
to use some
very light grit sandpaper to clean the
uh
the parts of the board that the the legs
of the spider that they call it
slide over there and uh then we're going
to use a little bit of
synthetic grease on it to get it uh
where it moves nice and smooth
clean that up and then on this side
you have a couple switches that need to
clean but all in all everything's pretty
cool
some people go crazy with lubricating
these things they spray crap
all over it spray wd-40 all over and
stuff wd-40 is not good long-term it'll
it'll it'll work good for a little bit
but then the stuff dries really thick
and
and makes it where it you know you have
you have issues so i just put like a
little drop a three in one oil on it
if you can like in the shaft down there
but on this one i'm not even going to
disassemble it because it's so easy to
get to the parts
first of all it's already it's still
working and it's so easy to get to the
parts of the board
that the spider rubs across so it's very
simple to clean it with some
just a little piece of sandpaper and uh
won't be any big deal now this one over
here has
more going on i'll bet it's the player
unit
because it's a it's uh
looks like it's got four different steps
so let's see
um one
two three yeah so that's
a one player game two player three
player
let's see how it's moving it's luggage i
mean it's working but
is it making good contact with
everything on the chip
probably not and you can see that the
way they've designed it
on this one you've got these contacts
over here
that do not have a spider on it they
don't do anything
so they're only using this area here
and this area here on the board the
other ones are on there but they're just
not even used but on this one
um they've got more legs on the spider
so they're
connecting stuff all over the freaking
place that changes so what is it doing
well if it's like a one player game and
it's sitting like that then it's sending
all of the power from the play field
to the one player score reels etc etc
and then if it goes to a two player it
has to move all of that so it has to
move all of the
the power so that it can now do things
just for the second player
you have to light up the lights just for
the second player and
etc etc so it's just a way for them to
move power around
with the stepper unit but uh
you got to get them working pretty good
though so they've gotta smoothly step up
and smoothly reset now this one
they're both still working so it should
be easy
we're just going to clean the the
contacts on the board there and
get it lubricated slightly and we'll see
how it looks whenever we
get done with it these also have this
really weird switch on the other side
i've had trouble with this before um
there is this switch here that you have
to get just right
so it there is a little bar there that
will open it
up at a certain point so
it's now reset when i pull this in
step a second position
third position fourth position
and you see how they've they've got it
misadjusted
basically if this is misadjusted you can
still put
coins in it and start more than or and
you can hit start and start more than a
four player game so
it's supposed to be
we're just gonna bend it a little bit
it's supposed to be in such a way that
it will stay closed
for the first three steps and then open
at the fourth step so that's the first
second third
fourth is still closed
so it's just little things like this you
have to get just right
gives you a little more second step
third step fourth step
so i can't tell from here if that's open
yet
but just little stuff like that you have
to look for that so if that
if that switch is not right what will
happen is when you press the start
button to start a game
it starts a one player game and then if
you press it again it starts a two
player three player
four player it should open that switch
so the next time you hit the start
button it doesn't do anything
with it adjust the way up in the air
like that where it never opens if you
hit it again
it would essentially try to start a five
player game but it couldn't because it
could only step up four spots
but it would still take a credit away
from you so that's not the worst thing
in the world now
much worse would be as if that's open
because then you can't start a game or
you can't start a two-player game or
whatever but we'll get it all adjusted
where it works good
and clean it up and show you what it
ended up looking like
okay so as we went through it i could
tell that somebody has already
been through it at some point so this is
not original uh
era dirt on these things somebody's
cleaned them up a little bit already
because the uh you can tell that
somebody has already
cleaned off the the contacts on the
stepper units
so after cleaning it
now get a nice clean
step each time
first position second position third
position
fourth position just how you want it
and i checked and i did have that whoa
i did have that uh switch on the other
side
adjusted properly so i think those are
good to go so that one and this one
so i think i think we got both of those
i got all of the relays cleaned
i got all the switches cleaned on the
score motor
the fuses are the right value check that
all of these little jones plugs that
plug in here
these are like little adjustments and
things they're all clean
so all of that should be good um
so yeah i think we're ready to slide the
play field back in it and then work on
the bottom of the play field but before
i do that
i want to see what that thing is that i
was talking about up there on the top
left corner that weird
thing with the that's almost like a
score reel
now usually all the stuff back here is
for coins so it has something to do with
the coin door usually
but we'll see if that's true so we've
got the manual right here we'll see what
they call it in the manual
neat little thing i saw in the manual it
says lubrication over lubrication causes
far
more trouble and coin operated equipment
then
under lubrication practically all cases
of poor contact
on switches and wiper discs are due to
oil or grease
or oil vapor okay which forms a film or
residue on the contacts
and will not allow current to pass
through excess lubricant may also seem
will may also seep into clutches causing
them to slip
important never use vaseline for
lubrication of any part of the machine
vaseline is not a true lubricant it
leaves a dirty and gummy residue and it
becomes very thick when cold
right and then it says a special coin
machine lubricant is supplied with each
machine
if you can get that stuff do it but 10
in one looks works pretty good
oh and on the on the contact discs
though
synthetic grease that's what we like to
use
and then this too a lot of people don't
get this one solenoid plungers should
not have a lubricant of any kind
don't put anything on the solenoids
people what are you thinking
what are you thinking doing that let's
see if it tells us what that one weird
thing is
look there it is right there
it's the alternator unit located on the
mechanism panel used in conjunction with
the five cent relay for two coins one
play feature now isn't that exactly what
i said it was gonna be for
so the switch this switch is in the hold
circuit to the five cent relay coil
and then this switch energizes the coin
relay
through the switch on the five cent
relay so
it basically um makes it where if you
need to put more than one coin
in but basically you put it in and this
thing turns around but it doesn't have
the switch
closed yet and then you put it in again
it closes the switch and makes it happen
so it's just a way for them to make
make it work whenever you put two things
in so that's pretty cool
all right so uh yeah so i'm gonna take
the play field pick it up
slide it in here and then uh we'll we'll
basically be doing the same thing on the
bottom of it that we did inside the
cabinet
all right so we got it back in the
machine but the first thing we have to
do
before we plug it in is clean these
jones plugs so you can see where it's
the brass is as through the tin it's
because somebody has already cleaned
them up
in the past
so they don't need much looks pretty
good actually
i think we're about ready to go what's
up with that one
i think that's fine
and then this one and they all look
pretty good
you don't have to really clean the back
of them because whenever they plug in
nothing touches on that part just
touches on the
front and the two sides all right so
that's pretty good so we can go ahead
and plug them in
um and then i'm going to go through and
just clean all the switches
on the play field while we have it up in
the air
all right um it looks like somebody's
already replaced the light bulb so maybe
we're going to get
lucky on this one what do you think
about that
the stepper unit here is the same thing
we've got to
clean these little
rivets but it's the exact same type of
machine really
we just needed to
step up and down this one has a spring
off of it so look at this
someone
i don't think that spring goes like that
i think that spring goes up on yeah but
i might be wrong
so i have to look at that might be
something wrong with that
and then we've got a little board here
with a bunch of relays on it
just like underneath same thing we just
need to clean all the switches and
everything
so just same as the same as always just
gotta go through and clean switches make
sure that they open and close properly
and then i need to see what's going on
with this whenever you
do this it just lifts it up see how
that's just jumping around i think this
spring just my opinion
should be around like that
it's more like that i think
oh that don't work either
well that does get me stepping a little
bit i don't know i might have to look in
the manual see how that one's supposed
to look something
something's not right um
but just the same stuff go through clean
everything and whenever i run into
weirdo stuff i'll let you know
okay so i got that cleaned up a little
bit of synthetic grease on it again
i figured out that spring that i was
thinking oh it's in the wrong spot it
was not the wrong spot it's just this
one was missing
but it was laying down in the bottom of
the cabinet and it's not damaged or
anything it just
came off somehow so now
when you click one way you go one way
and when you click the other way
you go the other one so should all be
good
and there is a little set of switches
here one closes and one opens
and like i said all the light bulbs
somebody they look like brand new light
bulbs so i don't know
we'll see how that works all of these
are very easy to clean
the flippers i'm not going to mess with
yet they're they're going to need some
work though
but we'll do that on a later video um
this switch here was adjusted way out
this is the out hole switch the ball
when it lands an out hole it makes that
switch it was
it was adjusted way out where it was
barely touching
that ain't right but the most
interesting thing i found
was right now
on these games they use these uh ground
braids
to to and so instead of putting a wire
to each socket they put a wire to the
socket and they have a
braid that runs to another one right
and they do that for all kinds of stuff
but
it had this thing going on
and maybe we can track it down
it may have still worked but for
whatever reason
see all of the abrasion there on the
play field
something had broke the
ground in in half so the the wire in
half
so it was just kind of hanging there i
cut it off um but
i don't it almost looked like somebody
did it on purpose i don't know how that
could have happened by accident or maybe
a rat did it or something but
we haven't had a lot of evidence of rats
damaging anything
um but because that was broke i think it
may have still worked though it may have
been a problem that didn't
actually cause any problems because the
wire ran up to here and then doubled
over and ran over to this switch
and then came back and went to this one
where it hit
this yellow
wire here right and then it also ran up
and went to this socket okay so it
should have been connected here
which would jump over to this switch up
to here
and it misses this switch this switch
has its own wires
but it goes to this light socket and
then it goes to this switch
and then it sends power to the
pop bumper for the the light
and then it goes to this switch and this
light but look there's two yellow wires
here too
so these would have fed all of this
and then these would have fed all of
this unless they were using the ground
to get power to these two yellow wires
or something i don't know
but i think it probably would have
worked without with that cut but what i
did was i put a little jumper so i
jumped it from there
to there just to replace the broken
wire but that was the only thing that
was significant everything else is just
a little worn some of the uh
inserts they didn't clean behind
whenever they put the new bulbs in so i
might have to go back and do that we'll
see how it looks
when it lights up but basically
everything looks cool and like i said it
looks like somebody had already serviced
it now this
bonus unit wouldn't have worked because
that spring had fallen off of it so
without that spring it wasn't able to
do it stepping like it's supposed to and
it needs to step people if it's a
stepper it needs a step
you got to make sure your stepper step
so i'll put the play field back down in
it and we'll turn it back on and see how
she looks
hopefully it uh hopefully it's starting
to well it won't look better because we
haven't done anything in the play field
yet but
maybe when we turn it on we'll get
lights on the play field
okay so this is an old williams this is
the first i've seen of the play field in
a while
because we've had it out of the machine
for a while the first video we've
whenever we figured out all those wires
have been cut we took a little time off
on this one
fixed some other games in between and
now we've came back to it so
i haven't seen it in a while but the
play field actually looks pretty good
had a little bit of wear over here
i think i'll be able to fix that a
little bit up there i think i'll be able
to fix that
we did we already did a set of videos on
this same machine before it was either a
jubilee or a darling i can't remember i
think it was a jubilee
um the darling is the two player version
but we uh
we had horrible damage to the play field
on that other one where we had to
repaint about
most of the playfield and it just
was the biggest freaking mess okay so
i'm gonna turn it on let's see if we get
any lights or if it does anything now
when i turn it on it may
count the bonus down
wow
why would it turn off my lights i guess
it was just a
maybe if i hit the left switch no
well let's see if we can start it and
see if it'll
i i understand why it counted the bonus
down it's because it wasn't on its
[Music]
home position so i've seen him do that
before even when the game's over you see
the game over light is on
but it's kind of weird that it turned
off the uh general illumination
but sometimes whenever you turn the
games on they do that
they don't have g i lights and then
until you start a game and you end the
game
but i'm gonna hit the start button and
let's see if it does anything so we
haven't done anything in the back box
so it may not be able to reset its uh
its score motor
i mean it's score reels over there so i
might have to turn it back off
well she tried he got back to 8 000
and then kicked the ball out and it's
still saying same player shoots again so
i don't know what that's all about
and my general illumination lights are
still out
there they are well we got some we got
an interesting one
going on on this one the gi la
the g the gi lights uh
come on for a minute
and seem to somehow alternate with the
same player shoots again when lit
now
we'll be able to figure that out but
i'll tell you
we've got the schematic so we'll be able
to track that down but i'll tell you
this could be
that we got a wire crossed remember we
we
soldered all the wires back together
look the same player shoots again like
goes out and all of the gi lights come
on
we're on ball four
it seems like whenever you hit something
that's 10 points the lights come on
wow how strange
but you know what i love that because
that'll give us something to track down
boy i'll get a good video out of
figuring out why in the world it's doing
that right
so we'll figure that out but
the game is actually playing i just
played a game on it
not very well because i was playing with
one hand the lights are all screwed up i
doubt it scored like it was supposed to
um i got 16 000 points that's probably
about right
but it is kind of limping along now and
all we've done is mess with the the
cabinet so on the next video
we'll uh we'll get in the back box and
and work through some of that stuff
but uh at least we got it kind of
trying to cooperate it's trying to do
its thing right
poor thing the gi lights won't work and
it's got a permanently stuck on same
player shoots again like
i wonder if they're the same color and
they're reversed
what if we have the g i lights plugged
in to the
same player shoots again light and the
same time shoots again like
when it's supposed to come on the g the
gi lights run up
let me look at the schematics real quick
so i don't know the the sh the shoot
again light on the insert and the play
field
are both connected to the
yellow wire which is also connected to
the play field display lights
and then on the other side the playful
display light should be connected
to a blue wire
and they shouldn't really turn on and
off
um nothing they should always be on oh
the lock relay if the lock relay
goes off it would turn them off but if
the lock relay goes off the whole game
ends
so there's nothing that should be
turning those on and off which means
almost assuredly we've got a wire across
somewhere
but if we've got yellow wires and blue
wires going to all the displays
i wonder if me putting that jumper on it
screwed it up i don't think i don't
think that's right because remember
so the yellow wires were connected to
the the ground strap that i was talking
about
or the the ground the shouldn't even
call it
well i guess it is a ground to the braid
the wire braid on the playfield the
yellow wires were connected to some of
the switches and to some of the lights
but if you see that is actually how it
should be there's
on this side it connects to switches and
on this side it's connecting the lights
so i don't know but the only way that
the shoot again light
should be on
it's a white and green wire it goes
through the extra ball relay
so it could be that like that white and
green wire i've got mixed up
put in the wrong place or something but
we'll get to the bottom of it people
because if i don't i'll never be able to
sell this thing i gotta fix that right
but we'll figure it out so it's nothing
obvious though but eventually we'll
we'll find that something's connected
wrong or something
so leave your comments below let us know
what you think of it make sure to give
us a thumbs up for taking the trouble to
film it this far
for you hope you're enjoying the ride i
think this is going to be one of our
most
um up games we've ever fixed
that's what i think i think this one's
about as bad as any of them have been
because of all of those cut wires but um
you know the secret to folding these is
they're folded in fourths
so if you fold it in fourth it folds
back up
and it even has the name on it um
i think i think this is going to be one
of our most screwed up games that we end
up fixing but whenever i say that i
think back to like our friday the 13th
that we did i mean
our nightmare on elm street pinball that
we did that was just destroyed it sat
right here when we fixed it same spot
right and i think back to that derby day
that we did that we ended up repainting
most of the play field and everything
and the last jubilee that we did or the
darling whatever it was uh
had to repaint the whole play field and
that eight ball that we did that all of
the balls were worn off of the middle of
the play field and we repainted them all
or how about that stars stern stars that
we did with all of the wear where it
looks like we had drug it out of a lake
so this one this one may be one of our
worst because of all those cut wires
and this back glass is destroyed people
look at that kid i'm trying not to say
the lord's name in vain as much as i
used to
holy moly if i could switch over to
instead of saying good god saying holy
moly
holy moly and look at this beautiful
woman with the screwed up hair
becky with the bad hair what's up with
that
so this one's got serious issues on that
back glass
but it's getting there what's up with my
focus lately on this camera i'm about to
get another camera i think the focus
keeps screwing up
if you change the
it doesn't like to auto focus anymore
but uh
there you go folks leave your comments
below let us know what you think make
sure to give us a thumbs up for taking
the trouble to film it for you
and we'd like to thank everybody that's
been doing our amazon links
that's really helping us out if you
don't know about that there's a link
down below to amazon
if you click the link anything you
choose to buy on amazon
gives us a little tip so thank you to
everybody that's been doing that
somebody on there earlier bought like an
arc welder or something
something like that so that was pretty
awesome and if you haven't yet
check out our our brother channel my
brother donnie
i'm usually over there with him he's
really our brother and he's crazy
so go check it out uh that we're working
on an old little tiny building that we
bought that we're trying to
renovate and uh rent out and a lot of
videos on that we've been uploading
lately so
go check that out if you haven't yet the
link is down below so we'll see you on
installment number three on this jubilee
and we'll get a little farther on it
and we'll we'll do that tomorrow so see
you then