Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball repair video for you.
You may have seen back in the day, we did a video where we started out and there was a
Bally Star Trek pinball machine sitting here that somebody had shot with a with a
bang-bang. Can't say that on YouTube. And we fixed it all up. Well, as soon as we moved that out,
we moved another game into one spot. This is kind of like our boat anchor spot here.
Joey keeps doing it. Joey, where did you get this machine?
The bottom part of the machine. I think I got it in a storage unit full of games.
Oh yeah, I remember that. Been a while. Remember there was a guy, didn't the guy sell us a couple
of them? And he had like one back glass or something and he wasn't going to give you
back glass or something. Maybe, I don't remember. But anyway. We can act like it came from wherever
you were. Yeah, just let's make up a story. It was a little church. They said it'd been in the
back room since 1977 and only the pastor could play it. But the guy liked to drink a lot and he
used to spill coke on the playfield. And then the cleaning crew, when they came in, they would clean
it up but they used bleach on the playfield and that's why it's so worn. Sounds good. That's where
this one came from. So, we've only got the bottom of it. So, it's got problems. This is a
rough one. So, what we're going to do in this video is we're going to completely reconstruct
out of just junk parts a Bali Lost World pinball machine. Most people, they would part this thing.
But here's the problem. There's nothing there that's got any value to it. So, you can't part it.
Somebody else already parted it. There's nothing left. There's nothing for us to part. The plastic
is about the only thing that you could get any money out of and you probably wouldn't get much
out of that. So, it's just this old beat up Bali Lost World and we're going to fix it up.
We'll do a series of it but this is the very first part. So, the problem is it's missing the head.
So, somewhere we got an extra head for a stern stingray. How did we do that?
This is a swimmer, isn't it? No, I think that's a stingray. Is that a swimmer?
No, I think it's a stingray. I thought we had like extra stingray heads.
I think this is a stern stingray because we got that extra back glass.
It might say in here somewhere. Oh, there it is. It says insert.
Yeah, it's a stingray. Stingray, baby. Yeah. It's a stern stingray. So, the deal with stern was,
as I understand it, they bought the company that was making Bali's boards and then used them to
make their boards. So, they're exact copies of the Bali boards and since the boards are the same,
they made the cabinets the same too. I don't know if they bought the company that made the cabinets
but a stern pinball machine of this era is very similar to a Bali pinball machine of this era.
The insert board. Are they in the wrong spot? Yes, they are.
All right. So, we've got the wrong head with the wrong art but we're going to bolt it on here
because it's the right size and it's missing this side piece but that's okay. Joey's going to make
one. The piece that goes there is the same as the piece that goes there but it goes there instead.
Okay. So, we've got a template. Won't be no problem. No big deal. The wiring harness should
be the same or close enough that we can make it happen. The main problem that I just noticed is
the Bali Lost World back glass. The score displays are in a different spot. There's two about there.
There's one here that's ball in play and then there's three and fours down here. So, we're
going to rewire the whole thing. It won't be no big deal for people. Don't worry about it.
So, that's what we're starting with. The play field is largely worn. Like I said,
he spilled cocoa on it all the time. So, these are our parts. Now, why would we do such a thing?
Because it's useless if you don't do something with it. I mean, you kind of
either we part it out and throw a bunch of stuff away or give it away or try to get $20 out of it
or we put it back together and we get thousands of dollars out of it. I'm going to go for the
thousands of dollars. So, this is what we're starting with. Now, you can see that we've got
other junk here. Like we've got this old jukebox here, this AMI. We're going to fix it too. These
AMIs are very underappreciated, but it's got a big hole in it. And then we've got a nice Seaberg
here that somebody replaced the pilasters in it with sheet metal. But I got a good deal on it. So,
this is kind of like our, I don't want to say junk. It's all got value, but this is what we're
starting with. All right. So, we're going to clean it up a little bit and we're going to set it up on
its legs, I guess, is the next thing. What do you think? Yep. All right. Here we go. All right.
I'm going to give you one of my trade secrets. Don't tell anybody.
So, you can buy brand new pinball legs. They're not too expensive. Then you got to pay shipping
on them. You got to wait on them. Then what are you going to do with the old legs? You just going
to throw them in the garbage? So, we like to just sand the old ones down and paint them.
And we like to use hammered paint. And this is as close as we can find to the original
Bali colored gray. This is dark bronze. I shouldn't be telling you this because then I'm
not going to be able to find this anymore. But I figured I'd do you a favor. But the hammered is
going to get down in there and just cover up, you know, the little pits that are going to be in it
after I get done sanding it. And then, of course, I'm going to put new leg levelers on it.
And then we like to put new bolts in it afterwards. So, this is the before.
Some of you be thinking, wow, those are bad. They're not really though. They look a lot worse
than they are. Most of that's just surface rust. It's going to come right off once I sand it.
And then I'm going to paint it with Rust-Oleum hammered paint. Well, it's been a while since
we worked on this Lost World. It's kind of a big project. It's one of those projects you don't
know if you're right, you're really ready to get started on it. And originally, we were just going
to try to touch up the cabinet. But after we started looking at it, it's, you know, it's pretty
rough on the sides. And again, this is a different back box. We would have had to paint that a solid
color and then just paint the frame black, which we'll still do. But we decided to go ahead and
order the decals for it. There's a guy on eBay that sold us a set of decals for the side of the
cabinet and the back box. We did put a set of decals on our Bride of Pin Bot pinball a while back.
It didn't really go that great. So I'm hoping this one will go a little bit better.
Maybe we learned something. Maybe we didn't. I guess we'll try it again.
But I'm going to take this outside and I'm going to sand down this cabinet.
I'm going to pretty much take it down to the wood. I think I'm going to bondo up a little bit
here and there. And I'm going to primer it or paint it. I'm going to do something with it
to just seal up the wood before I put the decals on. So that's my thought.
I'm going to take out the play field. Take everything out off of it, obviously.
But here's a before. Kind of a big job too because you got to take off the rails.
Coin door frame. I got to bondo up this corner. So I guess I'm going to get it out of there and
start on it. Well I'm making money already. I had no idea it had a bunch of stuff down inside of it.
I got the play field out and I had an extra lockdown bar in there for some reason.
I think what probably happened is I put this down inside of it and then somehow I had another
lockdown bar laying around and I guess I just put it on there. I forgot all about those.
It had a couple light fixtures in there, a lockdown bar, some marquee brackets. It's been
sitting over here for several years and I haven't even touched it. But this year I'm trying to work
through all of our old projects we've had sitting around forever. We got a ways to go
and we've got a bunch more than this at a different location. Last year we worked on a lot
of machines but most of them were actually for customers that saw us on YouTube and we got pretty
far behind on our own stuff. Well we got caught up on all of our repairs that we were doing for
other people. So this year I'm not going to take on quite as many repairs for other people and work
on a lot of our stuff because I've got to get some of this stuff fixed. It's just been sitting around
forever. I've probably had this game five years or more and it's just been sitting around
so we got to get to it. So I'm going to get all that out of there and I'm going to take off the
side rails, take off the shooter, take off the coin door frame and I'm going to bondo it up a
little bit around the edges. I'm going to take it outside and sand it down. I've got a little Milwaukee
palm sander cordless so that's what I'm going to do. I don't really have a good way to film that
because you know dust is going to be going everywhere and I think I'll just be back whenever
I get it sanded down and I may have some paint or primer on it but we'll be back. All right I got it
sanded down. I primed it, had to sand it some more. It got about as flat as I think I'm going
to be able to get it. Did a little bondo, wood filler on some of the corners but here's the
side art we were talking about. Obviously that's the front section for the coin door
and those are the two back box pieces and of course we've got the sides too down there also
but I guess I'm going to cut these out just to make them more manageable
and don't really know if I'm going to film this because there might be some
it might be frustrating is what I'm saying. There may be some some words involved because you got
to get it all lined up just right. I think I'm going to go ahead and paint the back
and the neck just to get my confidence up so it'll start looking a little bit better
and then when Ronnie gets in he's going to help me with the side art because it's probably going
to be a two-person job but anyway we'll see what happens. Oh and remember the rails
come down to there and cover that and it'll cover most of that back there but
anyway we'll see how it goes. Wish us luck. So I haven't bought any paint for it yet. I'm just
kind of winging it here but I'm going to need a yellow for the back of the cabinet and also for
the top of the back box. I'm looking through our stash and it looks like I bought this
I think it'll be pretty close. I'm going to dry a little darker. Looks like I bought it in 2016
so we'll see how it goes. Looks a little light but maybe we'll darken it up a little bit with
some black or something. All right we got one side on. We just got this side rail sitting on
there just so you kind of get the idea and I painted this part. I got that color pretty close
actually. So far so good. I think it's looking pretty nice. I always paint the edges of the
cabinet just in case whenever you trim it you know a little bit isn't perfectly lined up but
that's the left side. I think it looks pretty good. All right we got the other side on
and the front on. The guy didn't print it quite right. It was kind of too stretched.
We could have lowered this down to make that gap a little bit smaller but then this would
have been off the cabinet and that would have been cut in half. So we thought it would look
better like this. Once we get the coin door in and that trim there'll be a little gap there
but we actually looked at our old pictures from our other Lost World and there was a little gap
there anyway and so we kind of the guy didn't print it right. This is kind of a compromise.
If you can just do your original paint and touch up your original cabinet you're better off.
Don't take a nice usable cabinet and then try to put side art on it we don't think because
it's got lots of little things like here like the side rails is going to cover all of this
but whenever it gets up here it's not. It doesn't cover this little area and even once you get the
lockdown bar I think you're going to be able to see some of this so we're going to have to touch
that up a little bit. Hold on I'll show you. That's about where it goes and we couldn't raise
it up anymore because then it would have been off. We would have had a bad spot down here.
So that's what you got to deal with when you're working with reproduction artwork.
Nothing's ever as good as the original but you know on this one we normally would have touched
this cabinet up but we didn't really have much choice because we remember we don't have a head
for this machine. We are going to have to uh we had to turn our other head into a lost world so
we didn't have any artwork on it. So that was the main reason we went this route so we can have
let's see these go in the back box. So all in all I think it looks pretty good.
It's a lot better than where we started. Once we get the rails back on and the legs on
and the corn door in it's all going to come together I think. But yeah people think this
is an upgrade. If you've got a good original cabinet that's painted don't just get some
new side art. Leave your original side art if it's decent. If it's all messed up you can go this route
but don't take an 8 and try to take it to a 10 by putting artwork on it because it
it ain't really going to happen. But in our case this is working out okay.
All right now that we got the body all fixed up with artwork on it now we're going to move over
to the back box and I don't know if you've been watching the entire video but we actually don't
have a back box for a Lost World. This is from a swimmer. I think it's a stern swimmer but it's the
same size and it's in pretty bad shape. But we're going to sand it down to the wood.
I'm going to take some wood filler fill in some of the bad spots. This side over here is actually
missing this wood piece wood trim piece but I'm just going to trace this side over here
see who's calling. There was spam. We get so many spam calls and your phone tells you it's
it's a telemarketer or it's spam so I don't see how anybody answers the phone. That must be a
really tough job. But anyway we're going to trace this side. I'm sure we got some kind of
scrap laying around. I never throw out any lumber because you know somebody cut down a tree to get
that lumber and the price of wood is really expensive especially these days. So I'm sure
I've got something that I can make that out of but I'm not even going to worry about that right now
because if I put it on now it'll just get in my way whenever I'm sanding. So I'm going to go ahead
and sand it put some wood filler on it get everything nice and smooth and then we'll put
the art on and then I'll probably put that piece on last. But that's the plan we'll see how it goes.
This is actually going to be quite a bit of work because swimmer the displays are in the wrong spot
it would have been nice if we would have had an extra bally head that the display is all lined up
on. But yeah this one's going to be kind of tough to get all that straight. But again we're not going
to worry about that right now we're just trying to get the box and the artwork and everything on it
and then we'll go back and do that next time. But here's the before get a good look it's broke
yeah we um we actually got that lost world and a storage unit by we bought a bunch of games off
a guy he had a whole storage unit full of stuff and he had an extra lost world body
so there was two lost worlds in there but only one of them had the head
so we fixed the nicer one of the two a couple years back so we just had the body of the lost
world laying around and then um later on and in another deal we got an extra head out of a swimmer
so now we're going to try to piece it all together if everybody's wondering what the heck we're doing
here we don't really have much choice it's either fix it or throw it out which one you want us to do
yep i agree we got to do something with it it's gonna be a nice game if we can get all
pieced back together all right we'll be back later all right i'm outside on my workbench
so i found me a piece of scrap wood i cut it to length and then i put it up next to this side here
i clamped it there's my clamp traced it then i cut it it's not rocket science people come on now
so then i had to drill a hole from my lock once i line that up i'll still be able to get to the lock
i've got everything sanded down pretty good so i think i'm going to paint the back and the top
yellow while i got it outside and it's a nice day look at the weather so
how's that i'm gonna paint it yellow the top and the back and then i'm gonna put i'm gonna nail
that on there with some finish nails and then i'm going to probably paint the frame black
i call this the frame the back glass frame we've had four or five lost worlds and i think they
look good with the black frame so i'm gonna paint this one black and then once i get all that done
i'm gonna take it inside and we're gonna put those two decals on each side of it
and then we'll be back all right now tell the truth when i first started this video
you were probably thinking i don't know i think they bit off more than they can chew this time
i don't think that we did i think it's gonna be pretty nice come on now it's looking good
you have to admit that it's looking good for all the naysayers out there i think it looks great
it looks great i put these little uh protectors on here that go between the leg and the cabinet
just to keep the art from getting all scratched up you may be able to cut them here but i just
leave them long you can get them all different colors i got black ones just to tie in with the
black artwork of course i got my frame fixed up i only put one coat of black on it i might put
another coat on it after ronnie gets done fixing it because he likes to lay the play field up on
top of it anyway so i'll go back and touch that up later but i think it's looking pretty good
pretty much done with my part of it for a while i gotta put the buttons in and i've just got
these rails sitting on there for the video but i gotta clean those up and install them
and get the coin door frame back in and then ronnie's gonna start working in the back box
i'd imagine it's missing the transformer and all the boards but we do have a special sound
board we're going to put on put in this one from gto and i'm thinking we got a transformer
around here somewhere we got stuff everywhere but i'm pretty happy with how the artwork turned out
so i'm gonna pass it back to ronnie all right folks it's starting to look like something now
i slid the play field back in it on the next video we're gonna have to get into the power
supply the mpu board the lamp driver board we got to work through all the electronics so
however we uh we got the cabinet looking pretty good in my opinion so we will see you on the next
video hey if you like these old valley pinball machines make sure to check out this video
we'll see you on the next one