Fixing a Vintage Sylvania CRT & Radio Tube Caddy Somebody Left Out In The Rain!

Amateur Repair Time
257 followers
6 Video Views·Feb 15, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen this is Joe's
classic video games back with another
cool well this video doesn't have
anything to do with arcade
games on this video we're going to talk
about these old school tube caddies they
called them I've got three of these
things and I'm GNA show them to you um
we're going one of them is all screwed
up we got to fix it so let's check that
one out first
see if we can fix it it's the thing's
been left out and got wet and it's in
rough shape but uh we'll look at that
first and then we'll come back and check
this one out and then I've got another
one
so okay so here is another one that I've
got that I've uh I'm going to fix up a
little bit maybe we'll mess with it here
on this
video
so it's made a little different it's
plastic and it says Sylvania color
tronic
tubes right so our buddy Jean gave us
this and it was full of
tubes but it's damaged
unfortunately so the end's messed up and
the inside is all screwed up so
basically the um this had been left out
in the rain for quite a while it looked
like I did snap a picture before I
started of messing with it so uh let me
show you
that that's what it looked like I've
been cleaning it up a little bit so they
had duct tape all over this I took it
off and threw it away and cleaned this
as best I could and then this
side I cleaned up but this p panel here
is
really in bad shape now the
little uh panels that open the
doors um are really screwed up they're
made of like a card so these things
weren't
really I mean well I don't know I don't
I don't really know the story behind
them but it it seems like they weren't
really made to be a longterm
thing so here
is one of the
panels and you can see that it was just
like it's a little thicker than
cardboard I I call this backer board but
I don't know what it's actually
called this one's a little bit more
complete but it's just disgusting and
it's been all
wet but the plastic case is actually
kind of cool now
these things have very little
value
right so we're not going to fix it up
and then sell it make a bunch of money
off of it because all they're really
good for is to keep tubes in and nobody
uses tubes anymore so they're not really
that
useful but it's a neat little project I
kind of like the thing so I'm going to
fix it up a little bit so the first
thing I'm going to
do is I'm going to cut
um some new wood shelves for
so these things are riveted
on see the rivets broke on that
one uh so there's one two one two three
four five there are five rivets holding
it on so I can drill those rivets out
and then uh make a new board so let me
go get a
drill this is our work room people
there's storage room right um let me go
get a drill and I'll see if I can get
the rivets to pop loose so I can hang on
to these brackets and put them on our
new
board okay so I drilled the old rivets
out I still got to clean it up
obviously
and cut a little piece
of um lenau or whatever that stuff's
called and rivet it back in with the
little cheap Chinese
Riveter and you know
what I think it actually looks pretty
good that's working pretty good look at
this I even got it
like square look at
that all right so that's not bad
so there is supposed to be this panel
here so I'm gon to make one of those
too that folds down I measured the
original size of course and it U it
doesn't go all the way to the edge it
just that's how they made
it so I'm going to line up the hinges
make a little Mark drill some holes and
uh um rivet that to it as well okay so I
got the door mounted on
there not
bad now I know it's not all square
people look it's better than it was all
right people look look it's all old and
Rusty come on now come on people it
doesn't have to be perfect come on
now now you can do yours better I'm
sure okay so the last thing on this side
besides doing cosmetic stuff is on the
original
thing it had this little
leather
clasp
um that made it go over the edge you
know what I just thought I don't have
those
H oh wait just kind of a rivet okay um
so this little leather piece goes over
the edge to hold the door shut so let's
see if I can do anything with
that okay folks I cleaned it up a little
bit now it's still pretty
Rusty um so I could do some more work on
that you know I just noticed this side
has these and this doesn't if this side
would have had those it wouldn't have
that hole in
it this
close all right so here's what we ended
up
with tring to do all this with one
hand huh what do you think T
huh much better right I kind of needed
this so that's why I was uh working on
it I put the snaps on both sides because
this one it flexes a little bit whenever
you push it it's better to do it from
this side I guess and I can store some
tubes in
here I got a whole bunch of these loose
tubes so I wanted to sort them and have
a uh a good place to keep all of my
ones that aren't in boxes and then I can
use the other
one to hold the ones that are in boxes
see how that works
perfect so I really like that now I
could uh I could paint these or I could
uh also put stencils on them so it said
Sylvania again I wasn't really concerned
with getting it perfect or trying to
restore it you know I'm just just trying
to get it where I can use it and I think
I pulled that off you kind of have to
make sure that it lines up whenever you
latch it I
guess two hands are better than one
that's why we have two hands people so
you can use it
so very cool
very cool I don't have a radio one all
of these are TV ones I think yeah
definitely that one says
color electronic tubes well radios
aren't color they must be talking about
televisions so I wonder what the really
old ones look like that were just for
radios
pre-tv right okay so you saw that one
let's look at this big
one
so I got these from a
gentleman um who his father had passed
away who was
into radio repair his name was Bob and
so this is Bob's Old Tube
caddy it's in pretty good shape this
side's
missing
um a divider
panel but that's no big
deal and it's got a bunch of like TV
tubes I don't know too much about them
yet but I think the 12s the
50s and the
35s and maybe the sixes and the ones are
the ones that you would uh use in radios
a lot and the rest of them must be TV or
or
something this side still has its
snaps so this was
Bob's tube caddy
now the thing's really you
know again I think a lot of these tubes
I'm not going to use cuz they're for
[Music]
TVs and if you if you haven't thought
about it maybe this just isn't your
thing and you find yourself watching a
weird video like
this the two main things at least that
use tubes are radios and TVs well people
still repair the radios and collect
collect them you know because they're
smaller and uh you can still use them
pretty easily you just turn them on now
the the TV s take up a lot more room
they're harder to
repair and um it's just a hard cell it's
hard to sell somebody an old TV that
actually uses tubes so
unfortunately a lot of those are
U not as desirable so you run into this
situation where you find old tubes and
oh cool somebody's got a whole bunch of
oh they're all for TVs now they'll fit
in either one but it just depends on the
voltage and what they're used for and
all of that so there's some that that
will work in U a TV or a radio it just
depends on the design but in general
there's tons of tubes that work in the
old televisions and not many people are
fixing the old television some people
are Shango is fixing
them he can fix the heck out of one
right um but he's probably got all of
the TV tubes he'll ever need because
they're a lot easier to find than the uh
than the radio tubes so this is Bob's I
guess it's mine now but used to be Bob's
tube caddy let me show you this little
one this one's kind of cool cuz it's a
repair man's
caddy GE electronic
components color TV
service
so this also came from Mr
Bob and uh it's full of
stuff that you may never
[Applause]
use but it's cool to
have so there's two drawers of old uh
sockets probably used that he pulled off
of
well scratch that that's a new
one that one's new so I don't know a lot
of them look new actually they don't
look like they've ever had solder on
them but I don't think those are all
that valuable I don't think any of this
stuff's all that valuable unless it just
happen to have a tube in here
that's something else
um a coil with a spring on it oh you
know what that's
from who knows what this is
from this is just my guess I've seen
this
before well I don't know it won't
move maybe that might be from a
doorbell who
no so a lot of this
stuff o I've been looking for
this wow I need
that my tube tester the socket's about
worn out so I'm going to replace the
socket but I kind of wanted something
like this so that I don't tear up the
new socket on the tube testers if you
just keep
putting tubes in and out in and out in
and out in and out it wears out the
socket so it' be better to wear this out
this I think is so that you can you can
put the tube in it and then extend it up
and then you can test each pin of the
tube with these little doohickeys here
that's right I said doohickey deal with
it
people some alligator
clips I'm not going to charge you extra
for all of the video being out of focus
don't worry about
it is that a
flasher I think it might be a flash
relay
maybe owner's manual for an LCD Auto
ranging pocket multimeter so he passed
away a couple years years ago or about a
year and a half ago and his
son
[Music]
um was just trying to find somebody that
wanted to buy all of his stuff for so I
bought all of
his radio
equipment and a few radios and some
stuff like that a bunch of
tubes so for a while he had a business
he had a like a card that he was giving
people doing repairs because I got some
of the
cards resistor color
code oh that's pretty
cool okay so let's
do
[Music]
red do
it I guess that's red
red that's not
red that's
Violet I went the wrong way okay
red red yeah works
perfect it's pretty
cool just in case you don't have the
little limr memorized
I memorized the dirty one so I can't say
it
um some coax cable stuff a few
fuses bunch of
wire oh yeah wire markers I've seen
these before long time
[Applause]
ago some
little
pretty
cool I did not know they even
made uh tubes like that that
big so you get the idea so yeah I like
this one because it's just got a bunch
of stuff this one looks lived in you
know what I mean this is like this was
what somebody was using to actually get
the job
done you can tell that some guy you know
I don't know if Bob was using this all
the time or if he just bought it
somewhere or something but you can tell
that some guy or girl was
uh you know fixing something and then
saving a little whatever they could in
their toolbx just in case they needed it
or digging through here and
finding you know there a little socket
or something that they needed to get one
going again very
cool all right folks so there you go
that's my collection of tube caddies
with my
newly repaired
Sylvania color TV tube cadd it's awesome
I think we saved that one what do you
think if that was anywhere else would
they have thrown it in the
trash probably I think Jean bringing it
to us and uh
uh us thinking it was cool must have
saved that one now I mean I know we did
kind of a you know kind of an amateur
repair job there but that's why it's
called amateur repair time so on these
amateur repair Time videos you can leave
all the comments you want just telling
us how we didn't do it right we won't
mine so leave your comments below make
sure to let us know exactly what you
think about
that um and make sure sure to give us a
thumbs up for taking the trouble to film
it for you we didn't have to do that
folks I could have done a million other
things but I figured I'd I'd show you my
amateur repair attempt at fixing up this
Old Tube caddy so I'm going to cherish
it now it's very precious to me I'm
going to hang on to it for a long
time okay so I hope you enjoyed it leave
your comments below and while you're at
it make sure to check out my brother
Donnie my brother has his own YouTube
channel here I had somebody the other
day say well what's the name of his
YouTube channel it's my brother Donnie
that's the name of the YouTube channel
so go check it out the Link's down
below uh Joey and I work on arcade games
pinball machines Juke
boxes uh you know on the weekends
sometimes I'll do some videos like
this Donnie does old
Vehicles old buildings I'm over there
with them a lot lately we've been
working on a mobile home that we we're
fixing up so go check that out if you
haven't already but we'll see you back
here in a couple days with a pinball
machine video so uh we'll get back on
that these videos like this where it's
just an amateur thing where it's not
really what a lot of the people have
probably signed up to the channel to see
I'm just doing these as extra videos on
the weekend so hopefully hopefully you
don't mind but if you do you probably
weren't watching this video anyway so
we'll see you on the next one I hope you
enjoyed it I'm glad we were able to save
that thing
