Our Rowe AMI CD100A Mechanism Control Computer SMOKED, Let's See If We Can Fix This Jukebox!

Joe Jukeboxes
160 followers
346 Video Views·Jan 7, 2025
ladies and gentlemen this is Joe's
classic video games back with another
cool jukebox repair video for you this
evening we have had this uh row Ami box
bumping around the shop here for a while
we got off of a gentleman and I had an
some kind of error message in it and
something smelled inside it like it had
burnt up so it's been sitting around for
a while and it's finally time for us to
fix it
so we figured we would pull it out check
it out fix it film it fill it full of
CDs play it and then sell it what do you
think about that that's our plan so the
first part was we would pull it out of
where we had it stashed in the back and
we did so here it sits in our beautiful
showroom it's just me myself and I right
now but tomorrow we'll have lots of
people in going wow those are cool old
jukebox uh but we got to try to fix it
and figure out what's going on with it
might have to order some parts I have
worked on these before but I worked on
them out on Route so I didn't really do
any kind of component repair or anything
it was more just operating them and
fixing minor things and I think I messed
with the pages on some a few times where
they they wouldn't turn right and stuff
like that but this is some kind of
component that's burned up and uh we're
going to figure it out together though
what do you think about that so I'm
going toh carefully go through it we'll
figure out how it works and if you've
got one in a similar vintage of this uh
row maybe it'll help you figure yours
out too so we're going to step through
it and learn
together um I don't even know what model
this is but we'll look here in a minute
I'll go around to the back of it but the
first thing I want to do is uh open it
up and see what's going on inside of it
but whenever I move one I don't know if
I can do this with one hand or not
whenever I move one I always like
to to uh look inside of
them before I uh turn them on because I
don't want to that thing is heavy as
hell I don't want to turn them on when
there might be stuff loose that's broken
loose inside or
something um there may be you know the
power's Supply fell off the wall and
it's hanging in the back of the cabinet
uh so I like to just make sure
everything's still where it's supposed
to be before I plug it in so let me open
this heavy freaking door and then we'll
go from
there okay so I have a little pad of
paper here our uh Buddy's down the road
in
Gastonia uh own a printing company and
they always give us these little scratch
paper
pads uh the first thing I noticed was
you know I did get the door
open that thing is heavy so what's
pretty common on these is these gas
shocks wear
out and so somebody will make it like a
like this has a little pipe on it that
you can kind of move around so that it
kind of
jams between the end of the
strut and the top and holds the door
open
but that door probably
weighs 50 lbs
um that thing falls and hits you on the
head it might do some damage so I'd like
to at least see how much new Shocks
cost
um so this says
suspa this is the brand
here
saspa so I'm going to write that down
and I'll see if I can track those down
um I'm sure many people have ran into
that
problem okay so I looked up the parts
number and it appears that you can get
those actually from jukebox parts.com
they're about $30 each so uh you might
be able to find them cheaper if you uh
tried to measure them and get the ones
uh that go on a car but you need some
that can hold up a little bit of weight
I guess the back I guess the the back of
a a hatch of a car probably weighs about
the same look at this thing like why
would they do it like that that looks
like it's it's purposefully so it will
impel your
head and I haven't even checked out my
soft spot in a long time I mean I think
it's all filled in but I don't know I'm
young I don't know look at this one
that's even worse I think look at
this there are daggers on the top of the
freaking door and then they designed it
with a freaking gas spring that dies
slowly so that it'll stab your ass
whenever you go to work on it I just I
don't know about all
this so anyway let's see if we can get
this bad boy out of here what the
hell uh this oh this is a CD 100 I
figured out 100a 100a as opposed
to CD 100 which was the very first one
this is the basically the second one if
I can keep from getting
stabbed just suck up and out of here
yeah how come I can't do any of it
one-handed got that out it's a two-hand
job though it can sit back here in the
back where nobody hopefully will find it
and break any of the plastic leave my
plastic
alone all right so we are down into it
now so
um board came off the front everything's
cool so that gets us down here into the
there's no manual in it unfortunately
that would have helped a little bit
um got a few boards down in here this is
the
amplifier this is I guess the power
supply and then this has some coils and
some capacitors and some resistors on it
I have no idea what that would be for
but maybe some or something I don't
know there's our central control
computer then we have our CD rack here
in the
back and then uh it's got a pro player
in it which I believe is the best one I
think it came out a little
later
um
okay so I'm going to turn it on we're
going to see what kind of uh error
message we get if that was correct and
what what it was doing uh it's in normal
mode and it's on this little thing here
whenever the door shuts it pushes both
of those
back so let's turn it on and see if we
get anything out of
it nothing's hanging in the way
or or
anything we are getting some
error lights flashing on the CCC board
looks like there's another Mech down
there yeah we're getting we're getting
smoked we're getting smoked
folks so we're getting smoke coming up
from here I don't even know what board's
down there so we're going to have to
dig that out and see what see what's
going on but it did not like
that something's
burning Let's uh let's get that out of
there so here is that part it was
mounted on the side
there and I I didn't see it this time
but I believe we were getting like a
board error message or something
whenever we turned it on it's been
probably a year since we got this thing
but I just turned it on and I could see
a billow of smoke coming up from here
somewhere and I can smell it a little
bit right
now but everything's turned off and
everything we'll see what we can do yall
I have to help me hold it still while I
take it Loose there we
[Music]
go don't get
dizzy
okay so something is probably burnt all
to hell in here what do you think it is
you oldtimers probably already
know I'm going to
guess there's a bad
diode could be a
capacitor it's not a resistor because it
smells
like it smells like burning
plastic I see nothing that looks like
it's on
fire
H I was hoping for like you
know something
like obviously flamed out so that we
could know for sure what it
was what a let
down it's better whenever it's like
obvious h
looking for any kind of burn mark oh
snap it's
obvious and there we are that would be
the culprit now why is it doing
that wonder if I'm going be able to find
schematics for this
thing it's a uln 2003a what is that
folks all you experts out there uln
2003a
H and it's the only one in
here so now is it uh I I'd like to have
the schematics because I could check the
um to see if it uses the same voltage as
everything else or to see what drives it
or to see if it's just this chip failed
you know it could be it could just be
that that chip died oh no the one next
to it the same uln
2003a so they're both the same
chip so one died and the other one
didn't but I I don't even know what they
do um H I'm going to have to find some
schematics and track down what we're
even looking at but that's obviously the
problem that's what we were smelling it
was a
uh it was an IC chip now
folks an IC chip is it more like a
capacitor or more like a
resistor it's kind of more like a
transistor but a transistor really is
kind of like a diode I could smell that
it was a chip I just said it was a diode
but it's the same smell I'll bet I think
it I think you can tell the difference
in the
smells I'm trying to improve my
Sylvester imp
impersonation so you just add a list to
everything okay I'm going to see if I
can find any kind of schematics or
anything figure out what in the world
the
uln 2003a is doing on this
sucker okay so I am looking at the
service manual apparently this is an
updated version of the mechanism control
computer but the one that came with it
had a similar kind of function I don't
have the schematics for this exact one
but it kind of kind of work the same so
they're they're using this
chip basically there's two of them so
they're using one to drive LEDs and one
to drive
Motors
so so the the logic
signal for like the magazine
motor comes into the
chip and then it basically
grounds
Motors diode
Etc the diodes are running off of like 8
volts um but I'm thinking we might have
a motor that's screwed up what if a
motor shorted out or
something and so basically the way I
understand it like this input like the
logic tells the chip to ground that pin
which means that the voltage on the
other end end of whatever is connected
to that pin runs through the chip and it
can do up to 50
volts
but it could be that the power supply is
screwed up what if the power supply is
supposed to be sending 50 volts to the
uh motor or 30 volts to the motor and
it's sending 100 volts to the motor or
something so it's one of those things
where it could just be that that chips
span see like the counters here run off
28
volts and
that that uh chip is grounding that so
the 28 volts is actually running through
the chip but if that voltage were to get
really high where the chip can't handle
it like it's 100 volts or
something that would fry that chip the
other one might not be fried because it
might be the one that does the dodes
which only gets 8 volts so I think it
might be something like that so instead
of just replacing the chip and popping
it back
in I think there might be something in
the power supply or there might be a um
a motor that's stuck on that's uh burnt
up or something so that's where I'm
that's where my mind is heading so uh
I'm going to have to do some more
research we're probably going to have to
look at the power supply first and check
voltages there and make sure
everything's right and if it all seems
right then maybe we'll swap the
gy so let's see if we can get the uh the
figure out the how to check the voltages
coming out of the power
supply okay folks we're looking in the
manual if this power supply is still
similar to the old
one they may have updated it so there is
the power
supply and here is the harness that
comes out apparently there's one
connector with nine pins on it and the
main
voltages are 28 volts DC 28 volts
ac
um and then 8 volts DC you can't see
that let me let me blow it up so you can
see that that's what that
is that's a little better all right so
the main voltage is out of the power
spot 28 volts DC 28 volts ac and 8 volts
DC and then you've got some common wires
grounds and interestingly enough the
power switch turns
off 28 volt AC 28 volt DC and 8 volts
DC so I wonder if this little
thing will show
us what goes to the motors you would
think it would be that
AC you would think
[Music]
well this is the mechanism control this
is the board we're having the problems
with and it gets 28 and8 and then it
also gets the 28
volt
AC and then it is
what runs the motors
the motors are run off ac
voltage okay so uh we're going to check
on the power supply to see if we're
getting our correct
power so let me go back up here a couple
Pages there is this little area
here it's telling you like this
the the order of the theory of operation
power is turned on voltages and Commons
are applied to modules and
components at line voltage 115 volt AC
but here we're a little higher than that
we're at almost
125
um so it may be even a little higher so
28 volt AC should measure 26 to3 28 volt
DC should measure 23 to3 8vt DC should
measure 8.2 to 9.4 and 9.5 volt AC
should measure between 8.7 5 to 10 volt
AC I haven't found that one yet I don't
know what what board uses that yet it
might just be the the
um the uh bill acceptor or something
like that
but we have written down all of
that this is our pin
out so now we're going to go turn it on
without that Mech board in it so it
can't catch on
fire and uh measure the voltages out of
the power supply the way it looked it
looked like with the power off you
should get the voltages out of the power
supply H maybe we'll try that but uh
we'll go check that
out all right folks so they got that
sucker buried in there so I had to take
out the uh amplifier which just unplugs
and stuff but if you look there are
three LEDs there on the left it says 8
volts DC 28 volts DC 28 Vols AC and
there is the power
supply the plug there on the
left and so turn the power switch on oh
when you turn the switch off it does
turn all that off
uh so the 8vt DC we're getting 9.13
which is within the legal limits
according to the
uh the uh
manual the 28 volts DC we're getting 30
point 3 just slightly higher than the
manual but it's supposed to be 28 you
know 30.3 close enough and then the 28
volts ac we've got 30.4 again just
slightly
higher than what the manual
says so I think that's fine why am I
hearing
clicking there's some stuff clicking
behind
me
um something's trying to move or
something
uh and we're getting a system error but
remember the mechanism Boards out of it
so what am I hearing trying to
move
oh
duh
I can't believe you
Joe you're all worried about the disc
turning around that's what you were
hearing the little CDs are moving
around okay so uh I think the power
supply is fine
so I guess we're just going to wing it
we've got we've got the motors I guess I
could try to see if they seem like
they're shorted
huh
let me see if I can figure out what the
wiring to the motors is and we'll try to
measure the resistance across the motor
if it's real short you know like less
than 1 ohm or something it could be that
the the dot motor's obviously shorted
and that's what's frying it so we'll
check that next I'm going to look on the
schematics and see what the uh what the
wiring is for the
motors okay so this connector
p12 goes
to two Motors and a
solenoid
so if one of those is fried I was
thinking maybe that might be the problem
but I don't
know um so we're going to test it though
to just see so we can test between the
black wire and the white wire and
that'll check the the uh transfer motor
the black wire and the yellow and black
wire will test the magazine motor and
the black wire and the white and black
wire will'll test the detent so we're
just going to see if one of those seems
real shorted or something and I found
our 9.5 volt there's a separate
Transformer here that makes that for the
pro
player or the original player that one
that's in now's a pro player it might
not use it anymore okay so we're going
to test those next this thing's been
updated um but the wiring probably
wasn't updated so that that ought to be
the same and then once if we do find
something wrong maybe we can track
down we can track it back to that chip
or
something okay so here's the wiring that
plugged into that mechanism board and
that plug there is what has the two
Motors and the solenoid on it so I
checked the solenoid and it's got 31.6
ohms of resistance and you can see it in
the back there you can't see it too good
but there it's back here and it looks
brand new okay and so both of the motors
also look brand new they don't look
burnt up or anything like that but they
do have a really low resistance one of
them has 1.2 ohms and one has 1.5 ohms
and my meter usually is 0.1 or2 off so
it may even be lower than
that U so could
be something's wrong with the motors but
since they're both kind of similar it
kind of seems like they're just that's
just how they work they're probably just
probably because they're so strong they
need to have a low uh resistance on the
winding so it's got that that bite that
grab that strength so uh we're down to
now the only thing I can do is uh swap
that chip and plug the thing back in and
see if it works so that's our next step
so let's go look at the board so looking
at the back of the board that chip has
been replaced before but this gentleman
that had it um he didn't mess with
anything so he wouldn't have done it so
apparently though at one point it it has
had this issue before which tells me
that it's probably a fairly common issue
wish they would have put a socket in
it if I could go back in time and get
them to put a socket in it that'd be
much better for me they replace this
one which is a 74 HC
57 no HCS
74 I got that
right 74 HC 574
74574 uh and then they've replaced this
one as well which is a Phillips p80 c31
sbpn I have no clue what that is but it
looks looks uh
proprietary so uh I'm going to check to
see if any of the inputs are connected
to the or shorted to the outputs that'd
be bad because that means that the the
voltage that runs the motors might have
got to the logic side and fried some of
this other stuff so I'm going to see if
uh if it seems like any of those are
shorted okay so I'm trying to figure
this out
um so I've got a the ground test point
right here if I test from ground to pin8
of the U the uln 2003 that we think
might be fine which is this one uh pin 8
is connected to ground because that's
the ground pin on it but on this one pin
8 is not connected to ground there's 6K
resistance and if you look at the board
it's one of these ones
with
um multiple layers I
suppose you see on the on the bottom
left pin how you can see it's connected
to the the main plane of the board
that's out to getting its
ground and then on this one as
well and on this one as well but it
doesn't test his ground so I don't know
and so between pin 8 and pin n nine is
supposed to be the common uh connection
which I guess they could run power
through if they wanted to I remember I
don't have the schematics for it um pin
n is not connected to u8 pin 9 so it's a
different power source or
whatever
um but it's it's only got like 5 ohms
resistance between pin 8 and pin 9 but
pin 8 is not ground and pin 11 um is
only has about 40 ohms resistance 20
ohms resistance between pin 8 and pin 11
but nothing else seems shorted so none
of these inputs 1 through 7 seem shorted
to any of the outputs so I'm thinking
that's a good thing so it's probably
hopefully it didn't fry any of these
other iic chips so I'm going to pull it
off the board and then test it off the
board too and test the the pads on the
board to see if anything's shorted or
what the deal is that ground thing's a
little weird that chip you would think
would be grounded but maybe they're
using it a different
way all right so I successfully got the
old one out that pin eight on the on the
uh uh sheets I see it says that that's
supposed to be ground but on the on the
um logic diagrams I see it doesn't
really use a five and a ground like a
regular chip does so it may be that it's
not necessary I don't know or they can
do something different where they don't
use pin 8 but on the actual chip that
that I removed pin8 and nine are shorted
pin 8 and 11 are basically shorted um on
a new chip they're not on this one
they're not and that pin8 does not
connect to pin 8 of this or to ground
but if you look really carefully I might
be able to get it where you can see
it if you look really
carefully around the bottom left pin pin
8 can you see that it it's isolated see
the little traces where it's connected
to the
um I don't know what the hell you even
call it there's a trace under there
inside the board it must be a
multi-level board that it's that it's
connected to but there is a line above
pin 8 between 8 and
seven that isolates it and then it comes
down square and it kind of goes around
and I can't I kind of lose it after that
so it it does look like they're not
connecting it to a ground plane they're
just connecting it to some other plane
so I don't know what it goes to I wish I
had the schematic I could tell but I'm
just going to put a socket in it it
doesn't look like the trace is damaged
or that the Via is damaged U where it's
not connecting inside there like it
should or anything none of that looks
messed up so I'm just going to put a
socket in it we'll pop in a a new uln 20
three which I do have for some reason I
don't know why I've got those but I must
have used them on
something uh and then we'll put it back
in the thing and see if it makes any of
the Little Motors twirl so here's the
back this is pin 8 it flowed really
really nice like the other ones did
which tells me that the Via is probably
not screwed up usually if you screw that
up what'll happen is the solder will
stay up here on the top and it won't
seep down through the via VIA via
VIA
if I say I'm going somewhere I say I'm
going there via like I go to Myrtle
Beach via Lancaster but if it's going if
it's a physical thing I call it a via um
but it flowed really well through there
so I think it's
fine I don't know the only concern would
be that maybe it's not there's that
something inside it's supposed to
connect to isn't happening but I think
we I think we're good okay little socket
hopefully the socket can handle 28 volts
and if it can we're good to go so I'll
put that chip in and put it all back in
and then we'll pop it in the machine and
see if it does
anything all right folks we still got
the amp out of it and we still got the
CD rack out of it but we boled it all
back in it actually comes out really
easy and this is the the- 12 version so
it's the newer one so it's not really
one for the 100a so we're going to turn
it on and see if it does anything or if
it catches on fire again Joey's standing
15 ft back he thinks it's going to blow
up unbelievable Joe you're going to
leave me over here to die in the fire
yeah somebody's got to call somebody
that's
true that's how you do it
son that's how you do
it so why is it doing this mess you
might wonder Joey why is it doing this
got a bunch of stuff saved in the memory
yep it's trying to to play all the CDs
that it was trying to play before that
it's been saving in the memory for Lord
knows how
long and uh it's laying them down and
saying wait a minute there's no CD there
and so now it's permanently putting in
the memory that that CD doesn't exist
anymore so the next time we go to play
one of those it's it's not going to be
willing to play it but man we might have
fixed
it we got a board error light over here
it's on so that probably ain't good so
maybe maybe it's a bad
thing so we'll have to see what the
boorder eror light means over here we
have our 5vt light on but our row link
command or system error and our board
eror lights are off so we're good we
still have the amp unplugged of
course maybe they got it set on random
play could be and it's going through and
none of them are in there could
be let's do
this
that selections remaining zero it no
longer says out of order so that's good
we'll let it keep running for a few and
see if it if it gets tired and wears its
little self
out and come back
okay so I went into the service mode
which there's a little switch behind the
door there on the left I showed that
earlier then you type eight and it says
errors errors exist no it says errors
exist and then you type eight and then
it says status and then you type zero
and it says error history and then you
press popular and it said a which means
active error but an active
error it stays active and until you
clear
it I have no clue why it's just what it
does so it doesn't mean that it's still
doing
it for whatever reason uh and it was 05-
63 which means that the
mechanism to the Central Computer
communication was lost and it did it
five times and when it does that it
throws up an error
message and then there was a warning
uh so the next one was 145 was was the
ram check some error which you know uh
usually that means like a battery died
or
something uh I cleared those
out the thing keeps sitting there doing
its thing I don't think it should be
doing that if it's in service
mode even if it was playing all the
records I mean you wouldn't think um and
then it uh I went back out turned it off
turned it back on went back into the
service mode and there are no errors so
it's not it's not throwing up more
errors all of those lights are lit on
the mech board but they're not lit on
the the CCC board but I'm thinking that
maybe that other uln chip is bad because
the the uln one of them does the dodes
one of them does the motors well clearly
the one we replaced must have done the
motors because now they's
motoring right but now all of the LEDs
are on which it really shouldn't do that
cuz one of them's like the scan switch
one of them's the cancel switch one of
them's the the the motors moving and all
that one of them the error one of them's
the 5 volt they shouldn't all be on
they're supposed to Blink and stuff but
they're all on well it could be that
that uln the other uln chip is messed up
and it's just shorted them all on where
they're all on all the
time um or it could be that the chip
that drives both of those ulns is messed
up and so it's got the one constantly
scanning it's it's got the other one
constantly uh
um U turning the little switch on the
side that that lifts up the flap and all
that or whatever um so it could be that
it could be that uh it's got the contact
switch stuck I mean the the cancel
switch stuck where it's canceling it but
I don't know why it would play over and
over again if it was just cancelling so
we've still got issues so I'm going to
keep working on it but that'll be
another video I think we've gone far
enough today we've at least got it
partially fixed It's Kind it's a little
better than it was isn't
it so I think next up I need to uh I
think the first thing I might do is put
that other uln in a socket just to see
if that changes anything it could be
where it's oh one one other little piece
of evidence when you turn it back on
there's there's no errors so if the
thing is not communicating with the CCC
you would think that there would it
would throw up an error but it does not
and the CCC does not give an error it
was earlier you saw that but it's not
now so they could be talking on that
little row link they call it there's two
two uh wires that go to
it so that'll be for next time but we've
got a little bit gone through it a
little bit we've we've discovered a lot
so far right I'm learning on this so
hopefully you're learning too so I I'll
keep messing with it and film another
video now if I upload this one I must
have fixed it because I don't like to
upload the videos until I figure it all
out so I don't like to upload a video
where I you know get halfway through it
and then I never figure it out so the
second video never comes out I've done
that a couple times but not
usually um so we're about halfway there
I think on this one but I think that
Mech board still has some issues whether
it's just those LEDs are stuck on it
could be that the thing is in random
setup where it plays randomly or
something and it's it's just playing
non-stop Joe was pointing out to me that
it was moving the exact same amount of
CDs each time so it it must not be that
it has a selection stored in it or they
would be a little more random than that
so it's in some kind of mode or that
Mech board is just
tripping tripping I wish I had the full
set of schematics for that newer board
but I don't but we'll figure it
out so uh leave your comments below let
us know what you think so far give us a
thumbs up for filming it for you and
we'll see you on the next video soon
we'd like to thank everybody that's been
using our Amazon links if you don't know
about that there's a link to Amazon down
below if you click that uh and go to
Amazon and buy anything it gives us a
tip so thanks for doing that everybody
that's been doing that and uh also check
out our other channel my brother has a
channel it's called my brother
Donnie it's literally my brother Donnie
and he and I have bought this old
building in downtown Jefferson South
Carolina this little town uh down here
in the South if you like the South like
we love the South this little town has
this old grocery store it's this little
tiny building 3,000 ft and we're working
on it and painting and redoing the
bathroom and fixing air conditioning and
doing electrical stuff and putting a new
roof on it and all that that's pretty
fun Donnie's a character you might enjoy
that so go check that out if you haven't
already but we'll see you on the next
video hopefully we'll get this sucker up
and running next time
