Joe's Jukeboxes is our channel sharing all the repairs we've recorded videos of over the years. If you've got a jukebox that needs repair, if you watch our videos you may be able to fix it yourself. There are playlists here on the channel of each manufacturer, keep in mind that the boxes usually used similar if not exact mechanisms from year to year, so if you can fix one Rock-Ola, others will be very similar.
This channel is a subchannel of our main channel @JoesVideoGames !
00:00 - $100 Facebook Find: 1977 Rock-Ola 468 01:34 - Inspecting the Cabinet & Records 03:18 - Opening the Cabinet & Overview 04:00 - First Power-Up & Initial Diagnostics 06:06 - Testing Selections (It Won't Select!) 07:22 - Identifying the Suspect Areas 08:31 - Gripper Arm Gets Stuck & Manual Cycling 10:25 - Teardown & Cleaning the Gripper Mechanism 12:18 - Reassembling & Oiling the Mech 13:35 - Testing the Gripper (Manual Pin Trip) 16:06 - Cleaning the Write-In Contacts & Selector Plugs 17:01 - Selection Test: Mambo No. 5 Cycles! 18:03 - Diagnosing Weak Right Audio Channel 19:28 - Pulling the Amplifier Driver Cards 21:53 - Recapping the Preamp/Driver Boards 23:02 - Full Test: Fixed & Playing Strong 24:54 - Next Day Update: Clean Records, Labels & New Needle
Ladies and gentlemen,
this is Joe's Jukeboxes back with another cool jukebox repair video for
you this evening. This time we have a 1977 Rockola.
This is a model 468, I believe. I
picked this baby up this morning off Facebook.
A hundred bucks, but unfortunately it's broke.
So I like these Rockolas. If it had been anything else,
I probably wouldn't even have bought it,
but I've got so many jukeboxes. I probably won't ever get to them, but
I like the Rockolas because they're all pretty much the same.
And I hate to even say this, but usually they're pretty easy to fix.
But, you know, I've got a bunch of jukeboxes,
but I don't really have that many Rockolas
because all the Rockolas we've already fixed and sold.
I've got a bunch of Seabergs because they're a lot,
you know, we just don't know how to
work on them as good as we do the Rockolas.
I say we, I'm actually not very good at working on the Rockolas,
but my brother Ronnie is.
So I'm sure he could figure it out.
And I paid $100 for it, so I have nothing to lose.
I feel like I could always get $100 for it, even broke, you know.
But I think we'll be able to fix it.
But the cabinet looks pretty cool.
How many selections we got?
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
10, 20, 30, 40, 50, 60, 70, 80.
80 selection.
And one of the things I liked about it,
I like to buy them if they've already got the records in it, you know.
Obviously, I can buy more records.
I have a bunch more records, but it adds, you know,
saves me some trouble to track down a bunch of records.
This one's even got the labels printed
fairly well. I'll probably reprint them anyway,
just because it looks a lot better
than reprinting. But anyway, let's not get ahead of ourselves here.
The thing is still broke. I
don't know why you guys are focused in on the records it's got in it,
okay? But the story is,
the guy looked like a, I think he was Japanese,
and he said his mom had it in her restaurant.
So I can kind of, I don't know,
you can kind of picture this in a Japanese restaurant.
But, you know, he said that she retired and this is a 45 box.
So this thing's probably been sitting somewhere a long time.
You know, nobody, you don't see 45 boxes
in restaurants anymore, you know.
But it looks like this would fold down, but it doesn't.
It's all one piece.
It's metal.
It's attached to the box.
I guess you could take it off if you really wanted to,
but I'm not going to mess with it.
And it actually had the keys to it.
I haven't opened it yet.
I just picked it up about 30 minutes ago.
Things up like that.
Kind of the standard Rockola layout.
This, that's probably gonna be all gummed up,
the mechanism, we'll probably have to take that apart
and clean and oil it.
But let's plug it
in and see what happens.
My cord's
long enough
to reach.
We're all gonna be seeing it together.
I have no idea what it does.
He had a little video of the carriage spinning
on his Facebook
listing.
It looks like the amp came on, maybe.
Light on. Speakers are reloaded.
Is that light on? Pretty sure that light's on.
All right, so we're off.
Let's see what happens when we put it in operation.
It tried there for a second,
but we got a record jammed up there.
You can scan it. See all
the dust on the records.
You can tell it's
been sitting a long time.
Those aren't too bad right there.
That's the home position,
so it was probably sitting there
like that for a long time and got all that dust on it.
It must have the top open.
I don't want to do it
and operate,
but I'll do it and scan
the home position.
Let's add
a couple credits on it.
I guess let's just try to play 100
so the basket doesn't
have to go 34.
Select any single.
One, first digit, zero,
second digit, third digit.
Try again,
how about
200?
Well, we got some issues, obviously.
Oh yeah, I remember this one.
I had one similar to this.
These things light up whenever it's playing that record.
So if you write up 100, it lights up one, zero, and zero.
That's pretty neat.
All right.
I don't want to do nothing.
I'm probably going to have to take this all apart.
I know that doesn't really have nothing
to do with the selection, but we've got to.
Usually, you could clean all these contacts over
here, these contacts, and all those points there,
some light sandpaper, all these.
And then we're going to have to take this apart
and oil this because I'm sure this is froze.
It's supposed to move back and forth pretty good.
We've got to figure out why that speaker Herbaload is on.
We've got any trip breakers?
All right well I'll tinker around with it.
If I figure anything out I'll come back and tell you
what I found. Somebody's been dumping a bunch of oil
and stuff on it trying to get it moving looks
like. Anyway there's our start. Let's see what's next.
Well I did something stupid but I was just
wanting to see if I could get it to play real quick.
So I tripped a couple of these over here
and it stopped.
The pin stopped this and it grabbed it tried to grab a record.
But it couldn't because this is so gummed up.
Remember I was telling you these get gummed up?
Well, I was just seeing if I could get it
to play before I started messing with it.
Well, I couldn't pick it up because it was gummed up.
And then it sat it down.
And then I tried to cancel it.
And then it came up to here and it got stuck because this is gummed up.
I should have just went ahead and cleaned this from the beginning.
But, you know, I was impatient and I wanted to just see if I could,
you know, hear it play.
But yada, yada, yada.
So now it's stuck here.
So then you got to take off the front,
and there's a motor down here that you can actually turn by hand.
See this here?
If you turn that, see it's laying it back down.
See how that was kind of stuck?
I don't know if you caught that.
So the lazy way to do it is sometimes you could dump
a bunch of 3-in-1 oil on that mechanism
and keep working it back and forth, and it'll work.
But you really need to take it all apart
and get everything out of there.
So I'm going to do that next,
but I want to try to get it back up to the home position if I can.
But anyway, I'll keep working this
and I'll be back with you
whenever I get it all disassembled, okay?
Gotta keep working this back
until it gets back up there.
Luckily, there's a guy online on YouTube,
Joe's Jukeboxes,
and he tells you how to disassemble
and clean the frozen or sticking mech
on a Rockola jukebox.
And that's exactly what I need for this.
So I'm gonna follow this video, okay?
How to disassemble and clean frozen or sticking mech
on a Rockola jukebox.
So this guy's going to tell me exactly how to take it all apart,
what size punch that I need,
how to do it, how to clean it, and what kind of oil to use.
Okay. All right. So here's kind of
the exploded view of it. So here's the gripper arm.
This all goes through here. That goes through
that spring, goes through here, goes through here.
And then see that hole right there? That
hole goes all the way through there.
You push it in and this pin goes through this hole. It's all
Oh, one thing there.
See that hole there?
So all that gets...
Pushed in through there.
You squeeze it all together and that pin is holding it all in.
So what we're going to do is we're going to take our punch here.
This is an eighth of an inch.
We're going to put it in that hole right there.
Tap it a few times with a hammer. The pins are going
to come out the back and all this is going to come out.
And then we're going to clean all this as good as we can.
All this is going to be filled with old
grease and grime and all kinds of stuff and it's uh,
you know, it's all gummed up now.
So we've got to get all that out of there.
And then we're going to oil it with some three-in-one oil.
We're going to put some three-in-one oil in there, some on here.
And then after we do all that, we'll put the pin back in, of course,
tap it back in, and then it'll all be good to go on this part of it.
I'm sure we got other issues.
We got some write-in problems,
but we're trying to get this straight right now.
All right, so I got it all disassembled.
Basically, we got to clean all this old grease off of it.
See how it's all gummed up right there?
It's full.
Of course, inside there is old grease.
Got to get all that out of there.
And then obviously on the machine where all this goes through,
we got to clean all that too.
So we're going to clean all this up
and we're just going to put some new three-in-one oil on it.
I want to put it all back together.
This just slides in there like that.
It slides in there and it goes back in that pin.
I'm going to put that pin back in.
No big deal.
All right, I got it back in there.
And what I do is I just put some three-in-one oil on here
and in here and on the cracks here and it'll work its way in there.
The hardest part is getting that pin line back up just right.
And you've got to make sure it's nice and flush.
If it's sticking out too far,
this won't be able to go back in on itself.
So you've got to be careful of that.
So I haven't tried it yet.
Remember, we've still got a problem with our write-in.
I'm just going to flip a few of these down
and turn it on and see what happens.
I've got the speakers
unhooked too.
Grabbed it.
Of course, it picked the one record that wasn't in there.
Come on.
All right, let me cancel it.
Maybe it'll get the next one.
All right, it picked it up.
It didn't do that before.
We must have speakers at the top.
That
speaker's
working.
This one's not.
It might be balanced.
Weird, though.
Watch it
again.
Gets the next one.
Remember, all my records are filthy,
and I probably need another needle.
I think it's kind of funny that it was in a Japanese restaurant,
and it's full of country music, looks like.
All right,
let me get the speakers
back hooked up,
and we'll try it again.
All right, so I've got updates.
I don't know where I left off, but I got all that oiled and back
together, and I was having trouble where it wouldn't select my record.
My write-in wasn't working.
I don't know if you remember at the beginning of the video,
I told you I'd probably have to clean this.
So that's what I did.
I sanded that down with some fine sandpaper.
And then all these little traces, those little circles there,
that's where it knows where to stop and all that good stuff.
So I sanded that down, cleaned that up,
did the same thing on this side.
And now, oh yeah,
I also cleaned these two connectors.
That's something to do with the selection.
But anyway.
What are we playing?
What do we want to play?
Mambo
No. 5.
Mambo No. 5.
Caught it on this
side, but now this
side needs to catch it.
Bam.
Pick that up.
Bam.
This is bumble number five.
3, 4, 5, everybody in the console.
I don't know how long I can
play that before I get a copyright strike.
But I'm still having an issue
where the left channel
is working.
The right channel is not working that good,
but I think that actually has something to do with the
volume control in the back, because whenever I'm messing with this,
it seems like it's popping in
and out, so I think I got dirty. It's either that,
it could be the needle, and it could also be,
I'm adjusting this,
it could also be one of the caps on the amplifier board in there
on the right channel, but we'll figure it out.
I'm getting a lot closer though. I've basically
Basically, I got a working jukebox, but I need to fix this.
Right side of the amp.
All right, so I know this video is kind of all over the place.
Previously, we've cleaned all the connections down there.
We took the mechanism apart and oiled it and got it all going.
So it's actually selecting now.
It's playing the record.
Everything seems to be working, but the right channel is weak.
It comes out of the right channel, but it's not coming out.
Only about half volume.
I've put contact cleaner on the volume knob.
That didn't do it.
So it must be in the actual amp.
If you take these two screws out,
the two little cards in
there we're going to be able to take out
and one does the left side and one does the right side.
So I'm going to take both of those out
and change all the capacitors on both boards
and hopefully that'll get us going at full volume.
So once you take those two screws out,
there's a little button here that you hit
and this folds out like that and we need to get these two
I've got to go get a quarter-inch.
Yeah, I've been working on this a little bit at a time.
That's why we're all kind of all over the place on the video.
I've messed with it for 20 minutes.
And I've got to run the store too, so then I stop.
And then I come back the next day and mess with it some more.
I'm going to take that cover out.
There's a right channel and a left channel.
So that's the one we've probably got an issue with.
But I'm going to do both of them anyway.
And these just clip
in there.
Remember
how that
goes.
Here's
what we
need.
Those pins look terrible on it.
The right
side.
There's the left side.
So I'm going to take both these in the back
and change these capacitors.
I'm also going to clean up these connectors.
I'm going to reflow all this solder on the back side.
And we'll put it back in and try it out.
Hopefully that'll fix our issue with the right channel.
I may have to work on these.
I may have to mess with these also, these two little boards down here.
We'll see.
One thing at a time.
Well, NuCaps fixed it, guys.
And now you know why I like the 70s and 80s Rockolas.
They're all real similar on the inside.
I mean you guys saw me all I did was take apart
the mechanism get all the old grease out put new
grease in I used some sandpaper I sanded down some
of the uh contacts in there on the readout
I read in all that stuff I uh I changed about six capacitors
on the two little
Amplifier boards, and now we've got a working jukebox.
And that's why I like the Rockolas.
Most of the 70s or 80s rock olas, you can do stuff like that with.
I really only mess with this thing maybe an hour and a half,
and I got a good working jukebox now.
So, as that, I probably am going to reprint some of these labels.
All these actually are still on there.
All these are in here.
If somebody comes in and wants to buy it like it is,
I'll probably sell it to them.
But if they don't come in in the next few days,
I usually print them out.
There's a place called jukeboxrebel.com.
And he lets you print out.
He's got like a little template on there.
All you got to do is put in the record artist
and it'll print it right on out.
And you cut it to size and slide them babies in there
and you're ready to go.
So anyway, thanks everybody for watching.
We appreciate it.
We'll see you on the next one.
All
right.
So that's the next day.
I figured I'd get some comments about this.
So I figured I'd better add this to the end of the video.
I did end up cleaning, cleaning all the records.
I had to take them all out anyway.
Clean them.
I reprinted all of the labels.
And I put a new needle on it.
I'm sure people were wondering about that.
But another reason I like the Rockolas,
they all usually take the same needle.
So I had one in the back.
But anyway, I got it all finished up.
I think that's going to do it for this one.
And thanks everybody for watching.
We appreciate it.
I kind of wanted to get another video out
on the Jukebox channel, Joe's Jukeboxes.
But if you don't follow us on our main channel,
Joe's Classic Video Games,
we do a lot of the arcade games and pinball machines over there.
And we get several videos a week out on that channel.
Thank you for watching.
See you next time.