1947 Marlin 39A Type 1 22LR Lever action

Habit
3 followers
14 Video Views·Dec 22, 2024
What's up guys? Today I'm doing a video on a really cool .22 lever action. This is the Marlin
Model 39A Type 1. It was made in 1947. Now the cool thing about Marlins is if you look at the
serial number, the letter that precedes the serial number will actually tell you what year
your rifle has been produced. And this one was made in 1947. A buddy of mine, who actually is
the owner of this rifle, was having some ejection issues and asked if I would look into
repairing it. He thought it just needed a thorough cleaning, but as soon as I shot it, I was like
that extractor's worn. I tried everything to make it work a little bit better, you know,
giving more spring tension to the extractor, which seemed to work, but there was enough of a gap
between the claw and the rim that you could see it wobble. So if you didn't cycle it just right,
the shell casing would fall out and on top of the lift gate. And then when you tried to feed
the next round in, it would stovepipe and it was a fun little jam to get rid of.
They made a lot of different variants of this exact same rifle, so the first time I bought
an extractor for it, it was for the older model. It didn't work. It was too long.
This particular one was actually kind of tricky to find the right extractor for, but I found one.
I think it was Heritage Arms, something like that. I'll put it right here. But they had the right
part. It wasn't cheap, but as soon as I threw it into the rifle, this thing is flawless performance.
Even though, so if you look at the bolt, you can definitely tell this thing has been fired a lot.
And I don't blame the previous owners because it is a lot of fun to shoot. It was very popular
back in the day because you could put a decent amount of ammo, I think about 18 rounds into the
tube. That's a lot of ammo and for somebody on like a farm, this could be a lot of fun to plink
with. So I don't really blame them for shooting the living snot out of this rifle, but you can
tell that the extractor was worn out. So I was able to replace it and now it seems to shoot just
fine. And even though it's been shot to shit, the barrel is really clean. It looks great and we're
still getting some pretty decent accuracy out of it. Now, I only had some Remington Golden Bullets
left towards the end, so I didn't really show the accuracy of this rifle, but at 20 yards,
So, it does pretty good. I'm not going to say that this is the accuracy you can expect because
this is cheaper ammo, but I would say this is probably the maximum amount of spread
that this rifle is going to do. So I would say it's a very capable rifle, at least at 20 yards.
I'm sure it can go out further. This was my rifle. I would love to put a Tang Sight on it.
If you look back here, there's actually two holes right here that the Tang would mount to.
That would make this rifle so much cooler if I put a Tang Sight on it. If this was mine,
that would be the very first thing I would do because these sights are kind of boogered up,
to say the least. The front sight looks like it's been hit against something at some point.
This rifle's been used a lot. Now, it is a takedown, and I'm going to zoom in and show
you how this thing comes apart, and I'll show you the internals. So, I'll show you the gun is clear.
First thing you want to do is put it at half cock, and there's a takedown screw right here.
Once that's all the way out, you can hinge it apart, and there is your trigger assembly,
and there is your upper. Now, what's cool is you can carry it a lot more compact.
Now, let's take that bolt out. So, there is your bolt. Iron pin comes right out.
Right in here is the extractor because, as you can see, it's brand new. I mean,
if you compare it to the rest of the bolt, you can see some wear patterns.
This has definitely been shot, but it's just held in there by tension, and the old one
would move around right here, and the gap on the front was just inconsistent. So,
as it's pulling it out, the shell casing had a lot of room to wiggle around and fall straight down.
One thing that's really cool is, even taken down, none of the parts fall out,
and you can observe the mechanism. So, as you pull back, it goes over this peg,
but when it comes back over, it catches, and your cartridge lifter comes up,
loads around in. Then, when it gets to this point, you can see how far the lever has gone. It's
pushes down right here on the cartridge lifter. I think that's so cool. Right here,
pushes on a spring inside the receiver. It's located right here that holds the cartridges
in the mag tube. Isn't that cool? Now, it loads from the tube right here. On this one, it's really
stiff to pull out that follower, but drop your shell casings right here. Once you get to 18,
I believe that's what I counted, push it in. Then, you push down and turn, and you're ready to go.
After shooting this, I want one. These things are just overbuilt. They're smooth. Like,
you cycle it. I mean, with the Golden Bullets, it kind of had some issues, but that's cheap ammo,
but with Federal and pretty much anything else I've fed through it, it's just a smooth cycling
gun. It's got a good trigger on it. The sights could use some replacement, but they're not bad,
and it shot accurate enough. It's got some girth to it. It is a pretty heavy rifle,
so I don't think this was ever intended as a youth rifle. Not saying a kid couldn't enjoy
something like this, but I think this is more for somebody who just wants to do some flinking
with a high-quality rifle. If the owner of this ever decides he wants to sell it,
and if you're watching, I would buy this, man, anytime you want to sell it. If you get a chance
to get one of these, I definitely recommend it, but if you're having some failures to extract,
good luck finding the part, and if you find it, buy extras. Just trust me, you're gonna
want to shoot this thing. So, I hope you guys enjoyed this video. Sadly, I gotta go give this
rifle back. Can I keep it? Please? I don't even see him, and I know he's already saying no. Damn it.
Anyways, I hope you guys enjoyed this video.
