Building My British Wife an AR-15 and Surprising Her With it On Christmas!

Habit
3 followers
26 Video ViewsยทDec 17, 2024
So, my wife is sleeping right now, so I'm going to put her to bed, basically.
She's probably going to get up, she's only been here a couple of months.
I'm going to put her to bed, I'm going to put her to bed.
So, I'm going to build a blanket right now, and I'm going to make her some substitutions for her bath.
Once she goes back to the United Kingdom, that's when I'm going to put her to bed.
For now, it's just a moment.
With that out of the way, I can speak loud again.
Alright, so this is going to be the substitute, a CMMG Ambivac release, with a Knight's Armament button.
Next part I'm going to put in is the trigger.
This trigger came from Springfield Armory.
Yes, I know what you guys might think about them, but the trigger is definitely not bad.
Then, just need to put the hammer.
Took a little bit, but got the hammer and the trigger in.
Next we're going to do the safety.
This safety is Odin Works Ami Safety.
Here it is.
Now for the pistol grip.
I'm going to grab it off the cove, right here.
Feels really good.
It forces a very aggressive grip.
Kind of like a Glock, except it's straight at the bottom.
Now I'm going to start doing the buffer tube and the rear takedown tube.
Time to put on the buttstock, and then we're basically done.
Here we have one of the greatest buttstocks in the history of man.
Alright, let's see if this .50 cal upper is even compatible with this thing.
This upper does not fit the Maritime Bolt Catch.
Wow.
The upper is a perfect fit.
I have every part to finish it.
Nice tool.
Alright y'all, it's sort of a mess, but like I just stated,
here it is.
I went ahead and put the barrel nut on there already,
and the gas block and the gas tube,
because I didn't want to film it.
It was really hard.
So, it fits on there.
It should be good.
This is an old hammer forged barrel from the Geissele.
I forgot what profile the Geissele barrel was.
This is a Mil-Spec upper.
I believe it's an Aero Mil-Spec upper or something.
It has no marking on it.
It's stripped.
Nothing in it.
No load break.
None of that.
So, yeah.
Let's put this together.
So, the parts that I'm going to be putting on this are
MFT rail system.
I already have the barrel nut on there.
I already took everything out.
I'm just going to set it aside.
Surefire batteries, because I am putting a Surefire M600
or whatever it's called, the 600 series, on there.
All right.
Here's the Surefire Scout.
Right here.
No batteries in it.
Set it aside.
And then I do have a switch for it as well.
Right here.
I'm pretty sure I've shown these before,
so I did have them.
BCM Gunfighter.
Right here.
This is an M-Lok version.
I don't think I want the rail section on the bottom.
This is a Gamma 556 Moment Brake.
I've heard good reviews on it.
It's not too big.
That was a joke, by the way.
There's plenty of them that can handle weapons perfectly fine with flash hiders.
Here are the iron sights, or mirrors.
You're probably like, oh, why didn't you get M-Buses?
It's like, they're a little bit more expensive.
They do the same thing.
I'm pretty sure.
I've got M-Lok covers to block the rail sections around the gas block
so nobody burns their hands.
This is a Colt Bull Carrier Group.
M4 Bull Carrier Group.
Full auto.
And then I'm just going to use, for now, as a substitute,
this charging handle.
Mil-Stick.
Charging handle.
Does the job.
Last but not least,
Vortex Park II.
Not too expensive, but still works.
Alright, I'm going to be setting up everything where I think she would like it.
First, I'm going to put the muzzle brake on.
No particular reason.
After the muzzle brake, it comes in a cool little box.
Kind of feels like opening a knife.
Okay, so it comes with the brake itself.
Right here, nothing special.
It's just a normal muzzle brake.
And it comes with a crush washer.
Which is good.
I don't like those thousand sets of...
I don't even know what they're called.
But, you know what I'm saying.
Alright, brake's on there.
Just need to torque it into place.
Okay, muzzle brake is on there.
Hope the ports are on the right way.
So this is the top.
Y'all tell me in the comments if it is or not.
Here's the bottom.
Alright, on to the next thing.
The rail.
I picked something very lightweight and minimalistic.
I really like the design of these rails right here.
Because it's basically a RISC-III.
Really lightweight.
Looks nice.
It was on sale too.
Alright, it's on there.
Look at this.
It is a beautiful rail.
And for a rail, it was not that expensive.
Then again, it was on sale.
Next, we're going to put on the iron sights.
I think this is what they use on the Springfield Saints.
But I could be completely wrong.
Don't take my word for it.
Alright, front sight's on there.
Pretty neat.
Let's go ahead and take out the rear sight.
Alright, rear sight's on there.
Works the same as the front, I believe.
Y'all seen this from earlier.
So now we have four pieces.
We've got the lights, grip, rail covers, and what else do we have?
And we'll carry a grip from it.
I think what we're going to do is find out if I want to use M-LOK or Picatinny for the light mounts.
Let's take off the button to put on the button.
We've got a pair of batteries here.
So I decided to do M-LOK.
As you can see, it's a lot more tighter and it just fits a lot better.
Next, I'm going to go ahead and put these rail covers on there.
For these ones, I'm going to have to sand it a little bit to actually fit around the gas block.
Sadly, these designs are really bad on U-Strike.
But let me do that real quick.
That's going to be it for now.
Put the grip on.
Here she is.
For obvious reasons, I will be putting the foregrip so it is angled like this while holding.
Like this.
It is on.
It's sturdy.
Time to put this on.
I want the big button where my thumb rests and then the small buttons.
So how I have it set up is that my thumb will naturally rest on the pressure pad like this.
So this is obviously configured for right-handed people.
That's why.
Last but not least, the bolt carrier and the charging handle.
There we go.
Complete upper.
Here is the complete upper.
Let's pop these caps off for now.
This is how it looks.
Very lightweight build.
Sleek, minimalistic.
Just got the lower out from the other day.
When you know, I know.
Anyways, here it is.
Let's put it together.
They don't sell the right size box so I literally have to make the box out of existing boxes.
Because I'm not paying $25.
Alright, finished making the box.
Like I said, couldn't really find anything on the market.
So, build it myself, right?
BG?
You big.
What is it?
These are cute.
It's big.
Yeah.
I thought it was an empty box.
Is this your one?
No, it's not.
This is new.
For me?
This is like, yeah.
Is it heavy?
I don't know.
This is a lot lighter.
Maybe a lot lighter.
With the mag?
Yeah.
Yeah, it's yours.
I like it.
I actually like how this is.
It's so light too.
I can see the bow a lot.
Like it comes straight up.
My neck.
I actually like this as well.
Are we going to be stitching around your neck?
Yes.
I thought you said you weren't going to get me a gun anytime soon.
That's why.
Exactly.
That's the surprise.
But you know what?
I built this from scratch.
I picked every part for you.
I don't like you.
This is what I said.
