My MCX Spear LT Setup (The Why’s and $$$)

Habit
3 followers
15 Video Views·Dec 14, 2024
Alrighty y'all, back with another video.
So, just like the fool said, a lot of you guys wanted to see why I set up my spear.
I'll see the way I did.
So, I'm going to show you as quick as I can.
Hopefully one take, but if there's a few cuts, then hey, I just suck at talking.
So, let's get right into it.
We're going to go from booty to tip, unlike Rantham says.
But, we're going to be going over not only price, but why I got the parts.
Of course, as the title probably says.
This first part I'm going to be talking about is the Midwest Industries AK Alpha stock.
So, you guys may be wondering, why the hell did you get an AK stock for an AR looking weapon?
Well, that's because of two big reasons.
Cheek adjustability, and it is a 6th position.
Obviously, the SIG MCXs, they come with thick stocks.
And yeah, they do have the collapsible ones, but you know what?
Those collapsible ones don't have an adjustable cheek ball.
You guys are probably wondering, why the hell did you spend $300 on a stock?
One, it looks really cool.
Two, I have the money for it.
Three, it feels really good.
The butt pad is wide and big.
It feels good on my shoulder.
Cheek weld, if I don't like it, I can just move it up and down.
And of course, I have the ability to change it from 1 to the 6th position.
It's pretty badass.
I do want to show you guys something I did with the stock.
Obviously, this stock was made for AKs, so it came with this hideous folding knuckle right here.
This thing is absolutely ugly as hell.
So, of course, I wanted to use the SIG's proprietary folding knuckle that it came with.
That being said, I had to jury rig this thing pretty badly.
There is a nut between the folding knuckle and the stock to space it a little bit.
And then I have two pieces of brass from a 9mm round to keep the stock straight.
So, if I extend this, you can see the stock is somewhat in line with the weapon.
I'm pretty sure it's very in line.
It's pretty good.
And then, of course, it looks good.
It works well.
So, yeah.
I'll show you guys a little clip on how I did that.
I split the body of a bullet so I can make a little wedge there to make the stock straight.
Alrighty, I will be putting the prices of these parts on the screen after I talk about them or say the price.
Don't worry.
And I'll add up the total at the end, excluding and including the Spear LT.
Okay.
Next, I'm going to get into the safety.
The Spear LT's ambidextrous safety that it comes with highly favors right-handed shooters.
Sadly, I am a wrong-handed shooter.
So, I had to get something a little more extended on the right side so I can manipulate the safety a lot better.
So, while I'm manipulating the safety, fire and then save.
Fire, save.
Last time I checked, the safety was kind of absurdly priced.
Luckily, I had spares from another Ultra Duty lower parts kit.
I'm pretty sure this thing ran for like $80 for a safety.
It was pretty crazy, but it's not as bad as Radian.
Radian, they sell crazily expensive safeties for such a short throw.
Alrighty, onwards.
Next, I'm going to be talking about the takedown pins.
These are the Geissele Ultra Duty checkered takedown pins.
The reason I changed them is because the stock takedown pins for the Spear LT, if anyone owns a Spear LT, they're extremely hard to push out.
For the Mark 18 I had, I could push that out and pull it out with my thumbs.
For this, even with these better takedown pins, I do have to use a tool for it.
I'm weak, I'm sorry.
These takedown pins I did order separately for this and they're about $25.
Something like that.
The next part I have on here is a pretty significant part for me, at least as a left-handed shooter.
It is the Knight's Armament ambidextrous mag release.
Here it is, this is the Knight's ambidextrous mag release.
I'll show you guys it in action in a second.
Sorry for all the carbon leaking out of this gun.
I tried to wipe it as much as I could for the video.
This thing is the best ambidextrous magazine release I've ever used on the Spear.
I've tried the stock ambi mag release, which is horrible.
I tried CMMG, which is a little better, but I still hated it.
I also tried the Troy ambi mag release, which was better than the other two, but still not as good as the Knight's.
Just to show you guys how great it is, I'll do a quick little reload for you.
I do believe, like the safety, the mag release was kind of an absurd price, but we're buying from Knight's, so it's kind of expected.
I think these run for around $110 to $130.
Obviously, I'll put the actual price up here.
Now, on to the last lower receiver part, which is going to be the trigger.
To be fair, I've had a lot of time behind mil-spec triggers, like on the FN M4.
It's currently issued to most people in the military.
I have hands-on experience with three Geissele triggers and a number of Tropham triggers, which I'd never recommend to anybody.
Out of all the triggers I've tried, I've tried the Geissele SSA, SSAE, and the SD3G.
The Super Dynamic Regun, I believe that's what it's called.
And my favorite is, for sure, the SSAE Flat, which is what I have in here.
So, the reason I like the SSAE Flat so much is because everything on the trigger is predictable.
Like the other two Geissele triggers, the other two do this, too.
It's just this one has my preferred pull weight, which is a 3.5 to 4 pound trigger pull, which is perfect in my opinion.
The SD3G is just too light, and the SSAE is a little heavier for shooting fast, and I like to shoot fast.
Just a great take-up, a great wall, a great break, and a great reset. Can't go wrong with the Geissele.
I think on a normal day, this trigger does run for around 240.
Onward to probably the most important part of a rifle, is the optic.
So, you'll see on here, I don't have any iron sights.
One, I don't have room for them, and two, I'm pretty confident that the ACOG and the RMR are more durable than iron sights anyways.
If I dropped an ACOG or an RMR head-level onto concrete, I really doubt there's going to be much damage to it besides scratches.
But, if I dropped a pair of M-Bus Pros that are flipped up onto a concrete floor at my height, which I am a little over 6 foot, I'm pretty sure those M-Buses will bend or break.
So, again, never tried it, but that's just me using my little head for it.
But, that's the reason I don't have iron sights.
Anyways, why did I pick the RMR and Trijicon ACOG over an LPVO or an EOTech Magnifier?
Let's go through the process of elimination here.
The reason I didn't go with the EOTech Magnifier, which would probably be the second choice, is because I have to do a second motion with my support hand, which is, you know, it takes a lot more time than just tilting the weapon.
Let's say I'm firing at a somewhat distance, I'm firing at like 75 yards, I'm going to use the ACOG, right?
Bang, bang, bang, I can do that.
And if I need to transition to my 1x, all I have to do is flip my weapon 30 degrees, boom, right there, and I'm on a 1x dot.
That's why I didn't get an EOTech and Magnifier.
I opted for the more durable option as well.
This is more durable than the EOTech or LPVO.
Why didn't I pick the LPVO?
Big reason I didn't pick an LPVO is, let's say you have a 1x6, 1x8, 1x10 LPVO.
Let's be completely honest, when you're using an LPVO, when's the last time you genuinely wanted to pick a zoom level in between 1x6, 1x8, 1x10, right?
Last time I've seen videos on people using LPVO, they either do 1x power or the max power on them.
And again, it's just an extra movement with your hand to change from 1x power to 10x power.
You could argue, oh, why don't you put an RMR on the side like how this is mounted.
Well, the reason for that is, what's the point of buying an LPVO if you're not going to use the runtime setting on the LPVO and you're just going to use the dot?
It just defeats the purpose of the LPVO.
The variable optics are a lot better on longer range weapons.
And to be frank, this is just a 16-inch Spear LT.
I'm not going to be shooting past, like, 500, 600 yards anyways.
And if I am shooting at 300-plus yards, I am not in a good situation.
That's why I opted for the ACOG RMR combo.
I did sight these at two different distances.
I sighted the RMR at 25 yards.
It was a 0.38-inch group.
The group was, like, this big.
I did take my sweet, sweet time, so that's why I got it that small.
For the ACOG, I shot at 100 yards.
Sighted for 100 yards.
I got a sub-2 MOA group.
I think my grouping was, like, it was either 1.7 or 1.55.
It was in between that.
I was hitting consistently with the ACOG.
So I think a sub-2 MOA group at 100 yards with an ACOG is pretty good,
especially for a weapon that was made to contract the government,
which aren't the most accurate weapons in the first place.
So how much did this cost me?
The ACOG, not too bad.
$1,100, $1,100, $1,200 for a TA-31 four times with the Chevron.
R-Mark, $480 to $500.
I forgot.
I'll put them both here for today's prices.
And then, of course, I have the Unity Fast Mount for the ACOG slash VCOG
if you want to put the VCOG on there.
And then I have a 35- to 36-degree offset for it that I mounted around here.
A little different color grade because, you know, I want to be different sometimes.
But it's on there.
It looks great.
I love how much closer it is to my face than the Arisaka offset mount.
Arisaka was sitting all the way up here.
The closer the red dot is to my face, the bigger the window seems to me.
It's just a little more easier to find my target, find my dot, all that stuff
because I need that little advantage because I do suck.
This Unity mount with the offset and the RMR mount will play for, if you want to call it,
I think it was a little over $200, maybe $250.
All right, now I'm moving to the last few parts of the setup,
which is going to be on the fore-end.
And, of course, I'm going to be going with the durability option.
So I got a Surefire M600 or M640.
I think it's the M600 Scoutlite with the Surefire button,
which this button is a little too much for how much, uh...
I'm sorry, but that is one thing I'll say.
Really, $200 for a button, for a toggle button.
And the pressure pad is kind of crazy, but you know what?
Got it because why not?
And it works really well, so I'll give it that.
$200, well, not sure.
For $200, I'm expecting an AI-generated light that will blind people at its own will,
but we'll work with what we got.
Next on here, I do have these Slate Black rail covers.
These work really well.
They're decently cheap, too.
Most of the times, I don't praise cheap things, but this is one thing I do like a lot,
is these Slate Blacks.
I think they're around $12, $13 for a pack of three.
On here, I have five of them because my support hand needs to get covered.
So I have one on my non-support side,
and then on the other side, I have one on the bottom,
and then three covering the whole side of the analog rail on this side,
so my hand would be covered on all sides.
Next, I have these Magpul cable management thingies.
I forgot what they're called, but these also work really well.
They've never fallen off on me, and look how neat it makes it look.
Really, you don't need it.
Maybe you could just use a hair tie, but I wanted to be a little extra.
Throw these on here so this wire has no chance of getting in my way ever
or getting snagged on anything.
That's why those are on there.
I think these are around $10, $12 as well.
Could be wrong.
On to the bottom of the rail.
So before, I was running the BCM Gunfighter grip.
I do love this grip so, so much,
but because this is a decently long LOP or length of pull,
I do have a longer wingspan,
even so my arms are kind of pushing it out there.
I don't know if you can see at this angle.
They are kind of pushing it out there.
I do get a little fatigue.
Having a straight grip really helps reduce the fatigue in my arm
when I'm shooting for a long time.
When I have an angled grip, it kind of forces me to want to pull into my arm,
and I know it's really just a habit thing,
but that being said, got rid of the Gunfighter grip.
Leave that there. Love it so much.
And I put a Samsung FRAG grip on here.
This is a two-tone FRAG grip.
I got this grip for maybe $56 at a gun store,
so it's probably going to be a little more cheaper online.
$56 at a gun store.
Alrighty, so on to the very, very front and bottom of the rail.
I have a SLR Rifleworks Barricade Stop.
I don't know if I can find the comment, but someone stated it was a hand stop.
Why would you put a hand stop up there when you can't reach it?
I agree. Why would I do that?
Good thing I didn't do it, right?
I believe this is the Type 2 Barricade Stop.
The reason for getting it is
so when I run into a wooden barricade of sorts
or anything that's a little less hard than metal
that I can just jab my weapon into
and get that small amount of stability,
this will help a lot.
I'll give you a small demonstration without damaging the walls in this place.
Small example, let's say I wanted to mount on here.
All I have to do is jam into this.
My weapon is not moving anywhere, right?
People would opt to push this a little back
so it does have a little support from the M-Lok rail.
But I don't see the point in that
because when you're bracing off of an object
you're pushing into it decently hard regardless.
So the SLR Barricade Stop ran for about $35 to $40, somewhere around there.
It's not too off that price if I did get it wrong.
Now we're going to get to the third to last part
which is a very small but very significant part.
When I first got this weapon and threw a muzzle brake on there
somebody commented on the post
I think they said I needed something called a barrel collar
if I wanted to run it suppressed
and I should probably have one before putting any aftermarket muzzle devices on it regardless.
Thankfully they told me that, I really did appreciate that.
Went ahead and went on to SIG's website, ordered me one.
I tried to call and get a free one.
They said, no, you gotta buy it.
So I was like, okay, I'll buy it.
That little piece of metal right there is the barrel collar.
The barrel collar ran for like $15, $15, $20.
Now on to the second to last part.
I have good things and bad things to say about it.
This part is the Surefire War Comp.
The reasons I like it do outweigh the reasons I don't like it.
So that is good.
This thing ran me for about $150 to $180.
I have the ports tied to left-handed shooters, so myself,
so if any right-handed shooters use this, sorry.
Last piece of puzzle, for a suppressor.
Yeah, I can use this for anything that has a silicone mount on it,
but I got this specifically for the Spiral-T.
That's why I got the mini version and not the RC-2.
RC-2 is around 6.5 inches, this is 5 inches long.
If you really think about it, there's only this much suppressor actually adding to the barrel.
That's like a 2-inch extension past the muzzle.
So it's not that much bigger than the weapon by itself.
This suppressor costs around $1050,
excluding the tax stamps, excluding the transfer fee, all of that stuff.
Let's throw this thing on here.
I'm going to show you guys that it's not carbon-locked even after a couple thousand rounds.
Throw it on there, twist it until you hear the little click.
Click.
And then tighten it.
One little quarter rotation and it's good to go.
And of course, you can't go wrong with the beauty shot of the weapon.
So here it is.
Okay, well, that's all I have for this video.
If you guys agree with how I set this up,
please comment down below and give me all the praise in the world.
If you guys don't agree with me,
tell me how you would set up a 5.56x16-inch Spiral-T.
Anyways, hope you guys enjoyed the little breakdown of why I set up my weapon the way I did.
Again, thank you guys for watching.
I'll see you guys next time.
