Spoon Carving Decoration Techniques - Maryanne McGinn

Wood carving: Tips and Tools
229 followers
Greetings my friends, how are you doing? This is Zev from Zev Updoors and I hope you're having an
awesome day. So I'm joined once again by Marianne McGinn. Marianne, how are you doing?
So this video is a part two of this two-part series. In the first video we covered a complete
detailed tutorial on how to carve a spoon, where Marianne very kindly showed us from the complete
start to finish how to carve a spoon. Now if you haven't seen that video, I'll put a link below
and that can take you to that video should you want to watch that. Now this video is a part two
leading on from that. Now Marianne is a full-time professional woodworker. She's been working with
wood for most of her life and she's been teaching it as well as kind of doing it herself and she's
a very accomplished spoon carver and so in this video what I thought would be a great thing to do
would be to look at some of the techniques that Marianne deploys in her spoon carving to decorate
to create some kind of embellishment. So we're going to look at maybe two or three different
techniques and just to give you an idea to maybe start thinking about the things that maybe you
could try out in your spoon carving. Now would you say that obviously these techniques don't
necessarily have to be restricted to spoons. They could be essentially used in clean woodworking in
general, whatever it is that you're carving. So this is going to give you kind of a bit of
creativity and even for myself I've not really played around too much with decoration of spoons
and so for me it's what I'm looking forward to actually filming this. So as you're watching this
video I'm learning also as I'm filming it. So with your kind permission Marianne what we'll do in
this video we'll proceed to look at some of the decoration techniques that Marianne deploys
in decorating her spoons. So Marianne for the first technique is sometimes I've seen it being
referred to as flutes, kind of like a gouging technique. So with this technique first of all
look at the tool that you're using. It's not anything I bought especially, it's something I
found at the bottom of my toolbox. So it's got a slight curve on the end hasn't it? Yes it's a sweep.
And that means that the tool won't get stuck in.
So what is this technique? Just talk me through it.
Well I've almost finished the spoon, I haven't quite done the finishing cuts but I've put these facets
on top. You can either do that or you can have a rounded surface. If you've got facets then
you've got a line that you can follow and if you've just got a rounded one you have to
cut your own lines in like that, however you're going to do it. So would this also correspond
to the width of the gouge that you've got? Well if you've got wider spaces there then you just
have to do it more than once and get a wider groove so that it's more fiddly, nicer to have.
And is it needless to say that ideally you want to do this when the wood has dried and it's old?
Yes, sometimes I do part of it while the wood is fresh because it's easier to move the gouge along
but obviously you don't get a clean cut so I sometimes just establish where the grooves are
going to be and clean them up when the spoon's dry and get a very nice finish then.
Because obviously when the spoon's hard it's more difficult to control the tool.
Excellent. So to start off then, what would you do then?
Well because this is at the end and if you're holding it there
the chance that you're going to dig into your hands so I'd probably just try and
start it off like this if the grain allows
because it would be very painful.
And with most grooves and decorations like this
I don't want to start. So with this one, just for a recap, you are actually bracing it aren't you?
I'm bracing against there. Normally I would do it on my lap like that and I can hold the
chisel against my stomach and in fact if I breathe out it's quite good. Extra power.
But holding a spoon like that is a bit awkward so I often do it. You've got to make sure your
hands are behind the tool. I sometimes do it like this. This is most often how I do it.
I work my way down to the front, get them a bit deeper
and they get, do a lighter cut toward the end and they get thinner and then lighter.
So if you were to use a block for this then, how would you deploy it?
A block?
Yeah, so this carbon block.
I'll make sure it's not going to move and then you can just hold it against there
that's another safe way of doing it, especially on this side.
You could also have a little groove there to stick the end of your spoon in.
As I said it's important to have your fingers behind the chisel as it all would work.
Work along to the next one.
I'm going from the end of the spoon handle down to the bowl
because generally the grain is running in that direction anyway
so you don't want to do it that way, it'll just tear up.
Another one in the middle here.
Would this work with a V-gouge or is that a bit too kind of digging in?
I wouldn't use just a V-gouge but I think it would be too difficult because this is curved
it runs along whereas a V-gouge is more digging or something like that.
I start like that and then I work back and try and even out the grooves.
When you've got a thicker bit here you can run the groove along that thick bit
and it evens out the shape like that.
The whole time you're making sure you're going with the grain.
So to find gouges like this would it be kind of the usual suspects like eBay,
vintage tool stores etc? I guess so but I know that with wood carving tools you can buy them
according to the depth of the curve and the sweep of the handle and you get ones that go
in like that. So I don't know what number this is. 15 it says on it.
So I'm also making sure I keep a nice curve here. Are you keeping an eye on that as well?
Yeah because what can happen is if you start digging in too deeply on one side
and you lose shape it becomes less domed and more kind of pointy. So maybe an obvious thing
to state but I'm stating it nonetheless for the camera. Would it be worth kind of testing
out just on scrap wood? Absolutely that's how I started. I didn't want to start on a spoon it's
too scary so I just played around with a piece of wood. As I say I found this in the bottom of my
toolbox and I wanted to see what it would do and then I enjoyed doing the facets very much
and I thought I wonder what would happen if I run the groove along because I'd heard somewhere I
don't know where but you can do facets with a spoon gouge and that makes some kind of emphasizes
the ridges you know and so that's the same idea.
Try to control it with your thumb because it can run away.
Start at the sides and end up at the top.
So to get that kind of taper effect at the end you're kind of lifting it up.
Yes applying less pressure but also I think you start at the bottom and then work to the top
then you can layer the grooves.
Top groove will be the one that you see first.
See that's covering up the one below and evening out like that.
For this next technique I thought it might be worth just spending a minute just talking about
the blade itself. So this is something you acquired recently. Yes it's a Stu guy and it's
got a bevel on both sides and a nice long piece there.
So with this one what are you going to do now? I'm just going to cut a little outline. It's
something I do quite a bit on my screens. I just cut a line, a simple line and then
put the colouring in like cinnamon or coffee or whatever.
So once again you're bracing everything. I've got to make sure my fingers aren't in the way.
And this one in order to get the control and stay in the line
I'm holding the knife firmly and I'm using my thumb as a pivot.
Once again I have to work down like that.
But because of the tip of the blade it's pointing down.
Absolutely yeah. Could this be done on like a normal blade?
I think so. You'd just probably be holding it differently. You'd probably hold it like that
to get more control because it's straight. You'd have to either hold it like that and push it
backwards or sometimes run my finger against the spoon edge like that and get a line like that.
These ones are quite ready at the moment aren't they?
This one.
But this one that you were using just here?
Especially this one yeah.
Perfect. So that's the score and then the next step would be what? To put cinnamon in?
Yeah.
I'm using walnut oil because it's light and I can see I haven't joined the lines up so
I'll just go a little bit further and then clean it up with some oil.
Is walnut oil your preferred oil for finishing cinnamon?
I do. It's lighter. I know the linseed oil gives better protection.
But some people don't like it. I like it. It reminds me of patting in windows.
So this basically locks the cinnamon in doesn't it?
Yeah. Now on a light wood like that, it's gone into the grain of it.
So
half of the handle the same thickness as the middle of the bottom half there and then they
veer out at the end to give that characteristic split end.
Carry the line off across there.
I do usually start this when the wood is greener because it can be quite hard to pass oil.
This finger gauge is really useful.
You're using the same gauge you were just using earlier?
Yes.
So I start here.
Are you going into the line now?
I'm going into the line. I'm following the line all the way down.
And then I'm going to do a second line here at an angle to make a V.
When I get to the end, I take it to this other line here.
Cut it in there.
Go across the ends. Same thing. Cut it deep there.
Notice the whole time I'm holding it in a way I don't want it to split out.
Yeah. Same thing again here.
You can just hold it in your hands but it's quite good to brace it against something.
It
takes a bit of practice to be able to run your lines straight.
If you keep at it, you'll get there in the end.
Now this bit is a bit more tricky.
So I go like that.
What are you doing? Carving a V?
Carving a V, yeah.
The idea is that you join up with the little V that you cut down the side.
So
it comes out like that and then you just have to work across.
Sometimes I do this really nice.
It helps you get a long line, a nice clean line.
Like that.
So it looks like the top half is split from the bottom half but all it is is a little line cut
and then I sometimes paint inside there a different colour or paint the top half.
So we have a few hair rose examples you've done before.
That's one I've done with a coral rose on the top and then split only there.
Ah I see what you mean and then you just paint it.
Is that the bottom of your toolbox in here?
It is now.
And this one here I've done the same thing and I've just run another line around the edge
and notched it out there and then that one was from a crook so it's got a wacky
curve on it.
I've done the same thing and then I've pierced it there.
And that's a good way of emphasising the hook.
I'm just going to have a brief discussion around paints.
So what paints do you typically use at home?
I'm using milk paints that's a paint with a casing as a binder which is what I find in milk
and I started using powdered ones but I got very variable results probably because
I was too impatient and I didn't follow the instructions to the letter.
So I now use these ones they're German but they're also casing paints
and they're already mixed so there's no waiting involved.
And so with this one these are primarily the main paints that you use?
Yes.
And is it just literally as obvious as just kind of application to the spoon
then how long does it typically take to dry these ones?
Touch dry very quickly but I think to cure the paint it probably takes a few weeks.
And so with the painting is it the same sort of thing where you
it's best to kind of play around on scrap wood first to get effects and stuff?
Just get the colour you want sometimes you're lucky sometimes it's not quite the right shade.
So is it worth kind of getting maybe a couple of these little palettes
mixing paint around?
Yeah or a toothpick or a saucer, anything really, anything washable.
Keep mixing the paints until you get the colour you want
and experiment I'll show you which one is going to be the best.
And are you still going through a lot of the phase of kind of experimenting around different colours?
Always, always.
So there you go my friends that is a wrap for this video.
Marianne thank you so much.
So as we mentioned earlier in this video this video is designed to just give you a bit of an
insight into the creative ways in which you can embellish your spoons and really these principles
can be a part of any form of painting you're working with in Britain.
So the goal with this is to kind of give you some ideas into things that you can start
experimenting around with and as Marianne mentioned before you can get scrap bits of wood.
Would you say that's probably the best way?
No.
Scrap bits of wood you've got nothing to lose and just play around with.
The paint is surprisingly not even touched yet so this is something I really want to
be getting into myself.
Now also I mentioned in the beginning of this video this is the part two to the two part
series.
The first part is a very detailed video on how to carve a spoon.
Once again as I mentioned the link below will be to that video.
I'm going to highly recommend that you go and check that out it's a fantastic video
that goes into in-depth the process that Marianne uses from start to finish and obviously in
this part two we looked at some ideas and suggestions for embellishment.
Now Marianne does this full-time professionally and so I'm extremely grateful that she's
allowed me to come into her abode and her workspace and to document her process.
She teaches, she also sells her wares and they're very proper.
She's very well respected amongst the spoon carving community.
People have been doing this for a very long time.
So in our way of saying thank you in your way if you gain any form of knowledge from
this whatsoever all I ask of you is the following two things.
Number one if you can go check out her Instagram and if you're on Instagram give her a follow
and also I've got a link to a website both those links will be down below.
On her website you can find out more about the work that she does, the teaching that
she has for sale and also I'd encourage you while you're on the website to join her newsletter
by entering your name and email and that way what you'll do is you'll get in contact with
you from time to time to let you know about her goings on.
So like I said the links to the Instagram and website will be down below and it will
mean the world to me if you gain any form of value from this video whatsoever it's just
your way of saying thank you to Marianne for taking the time out for me to document her
process.
So hope you enjoy this video links will be down below to everything that I've mentioned
Marianne thank you so much once again and so until the next time from Marianne and myself
I hope whatever you're doing you have a blessed day a blessed week ahead.
Peace out.
