Turning a Log into a Large Hawk

Wood carving: Tips and Tools
229 followers
Hey guys, welcome back for another carving video. So today we are starting
the first of a three-part carving order. So it is going to be a red-tailed hawk,
a pretty big five, five and a half foot black bear,
and then a life-size German shepherd. So we're gonna kick this
order off with the red-tailed hawk. They're all gonna have their own videos
and I'm super excited. I've never done a red-tailed hawk and I honestly haven't
done many pointy-faced birds in general, which is
surprising because like eagles are really popular carving and I really
have done two eagles in my whole time carving.
So I'm really excited. I've been wanting to do either like an eagle or hawk
or a bird like that. Whenever it's like something you want to do,
oh it feels so good. So we're gonna jump into the red-tailed hawk today.
It's a little chilly today so we're gonna get started
like right now. Let's start right now.
Sun's going down. It's pretty. So I'm gonna wrap up for today
but I'm gonna actually move him over to my normal carving area.
I think it's gonna be light enough that I can kind of roll it but I just wanted
to show you because I know I was kind of moving
the camera around and working all over the place. So I left the
base pretty bulky and pretty much just
removed the two inches of that like sappy sugar wood
and I was able to clear out in there. You can probably see my fingers.
Left this really bulky so I can kind of really
carve some deep feathering into there. Left the head bulky.
Hawks kind of have small heads for their bodies so that will get shrunken down a
lot and kind of made a little bit more
proportional. But pretty happy with it so far.
Thinking about doing a little squirrel on the base.
He's looking the other way so kind of crawling up.
But yeah I'll see you guys tomorrow. Back at it this morning. So we're gonna
start with the head. I think by getting the head kind of
gently shaped out it's going to kind of set the tone for the rest of the body
proportion wise. So I have just kind of some little lines
here. So we'll start with the chainsaw. Get
you know like the bulk of the material removed.
Then we'll jump over to our hand tools. So yeah let's get this looking
more like a hawk.
So we're at a good stopping point on the head.
So we're gonna move down to the feet but I just kind of wanted to show
you the face from a couple different angles because I know it's kind of tough
for you guys to see it. So you can see we shortened that beak up
quite a bit. Has like a very noble stern look
with that uh kind of sharp brow. So we'll still do quite a bit of work on
the face but um it's good for now. So we're gonna
go ahead and carve some feet out of the top of
the stump. And then we'll be ready for feathers and
all the fun stuff. So let's give this guy some feet.
Our hawk is shaping out and that's this is like one of the best stages when you
like start seeing everything kind of come together.
I'm really happy with his feet. So now we're gonna jump
into his wings which might actually be my absolute
favorite part on the birds. So I have the layers all kind of laid out.
So let me show you that and then we'll lay some feathers.
So these are the layers of feathering we're gonna define.
Um I was looking at a bunch of hawk pictures.
So we're actually going to be hollowing this out
because their flight feathers stack very heavily
into these little kind of cones. Um so yeah actually let's see. I have a
little sketch here that kind of shows it.
So you can see how they kind of do that. This one is a good example but his
flight feathers are open. So imagine if all those were pinched
shut they would be kind of like that little cone.
So I'm gonna set you up on the tripod and we'll get right to it.
So the carving portion of the hawk is complete.
So I figured I'd kind of just show you guys around before we uh
torch him and then we're gonna put him to the side
and work on the two other projects and then we'll finish them all up together.
But obviously in this video you'll see this
this hawk finished up. But I'm pretty happy with him so
let me show you. So we have his head. He's sanded that beak good.
Has a nice kind of sharp brow. Gives him a nice stern semi-intimidating
look. Let me pull those feathers down.
Have our feet and our talons. A little squirrel here.
process on Mr. Hawk here. So I have his feet and the base
kind of just draped with a trash bag right now.
That way we can kind of catch some of that overspray.
But I like to start with my lightest colors
and then work towards my darkest colors. And it's gonna be
not necessarily tough but we're gonna have a lot of freedom with this one
because every single picture of a red-tailed
hawk that I have looked up they have all looked drastically
different. You know some of them have minimal white and then some of them
have like a lot of white. But we're gonna go for more of that classic look
where we have the white chest, some white features
around the face, and then just minimal white
in the back. More of those dark feathers. So
I'm gonna use kind of a almost like a deep cream color. We're gonna
paint the whole hawk with it and then we're
gonna go ahead and layer on our darker colors after that dries.
So we'll start with the whitish kind of color and we'll go from there.
So we have a complete red-tailed hawk and I gotta say guys I really like how
this one came out. It makes me want to carve another hawk like immediately.
I definitely think I'll be carving more hawks.
The painting was pretty complex but I I'm really really loving the airbrush
and everything. So I had a lot of fun. I had a lot of
fun doing this one. So I cannot wait to show you.
Are you ready? You ready to see our red-tailed hawk?
