How to Sharpen Your Whittling and Wood Carving Knives (Stones, Leather Strops, and Sandpaper)

Carving Art Channel
11 followers
Hey everybody, this is Bryan from Carving is Fun and in this video
let's talk about how to both sharpen your knives and keep them properly honed while you're carving.
Now knowing how to make and maintain a practical wood carving edge is a key skill to learn
for both a safer and more enjoyable wood carving experience.
Now some people do go on about getting their knives hair whittling sharp or even scary sharp
but from my own experiences this is not necessary.
What we're going to be targeting here in this video is a well honed and practical
cutting edge for whittling and wood carving.
So to start it off we're going to be going over three different subjects in this video.
One being the tools that you're going to need to
have in order to grind down your edge and hone it down.
Two, how to put a proper edge on your knife which is the cutting edge right there make
sure it's the right angle and how to maintain that edge while you're carving which is a
very important thing to do.
All right to start off you're going to basically need two different types of tools here.
One is a basic stone to do more of the heavy grinding.
And then a leather strop to hone down that edge to a nice razor fine cutting edge.
Starting off with the stone you don't need anything too terribly fancy with it.
I personally like the ones with the double-sided stone on it preferably the ones that have like
a 400 to 600 grit stone on one side and maybe an 800 to 1000 grit stone on the other side.
This just makes it easier for you to transition from a more coarse stone for more heavy grinding
for reshaping the blade to a nicer smoother stone to help refine that edge a little bit more.
Then after that you're going to be wanting to go to something
to polish and hone that edge down to a very nice nice razor sharp edge.
For this you're going to want a leather strop with polishing compound on it.
We're going to be mainly be focusing on the green polishing compound
or if you're going to be using a flex cut variant the flex cut yellow compound.
Both are about the same thing they'll do the same same job.
There are a lot of other different colors out there really really coarse to very very fine.
The only two that you're probably going to want to look into getting is the green and blue one.
Those are both meant for steel and primarily focusing on the green one
because that's just going to be your general purpose all around one that you're going to want.
The blue is a much finer one and if you want to get a super super fine edge
yeah you can use that one but green is going to be the one that you're
going to be using most of the time anyways.
Now there's a lot of different options for getting a leather strop.
Flex cut version they come already the leather is already glued to the wooden block.
Beavercraft version it comes in almost like a kit sometimes where you can just get the
leather by itself and the green polishing compound that you have to glue onto your
own wood block like this one sometimes they come or you can also find the ones that have
the leather already glued to the wood.
If you want a full rundown on that I have another video which I'll link up in the corner over there
and at the end of the video as well so you can go and review that.
Now if you just have your own piece of leather lying around yeah you can use that as well
glue it right to the wood apply the polishing compound to it you'll be fine.
Now you don't need to have a leather strop or a stone if you don't want to have to
afford them or anything like that or if you have some other stuff as well.
I have been using me personally my stone and 1000 2000 grit sandpaper.
This is 1000 grit wet dry automotive sandpaper I got at the automotive store
works really well just glued to a piece of wood you'll be good right there.
I also have this one for travel which is a diamond plate sharpening tool right here
it's two different sides one's a little bit coarser than the other
that way it's just like my stone where it's two different coarseness so I can
do a rough grind on one side and then smooth it out on another.
This one's more for travel there are other ones out there that are much
wider and longer you can get them if you want.
All right now let's get into putting a proper edge on your knife.
Most whittling and wood carving knives come with a pretty decent edge on them already
and will just need honing for either maintenance or just at the beginning
but you'll be able to see the difference on how these edges are.
Usually the the ones that are all set and ready to go will have a nice hone on the edge
and it'll be a bit shiny the ones that will need work
kind of almost look like they took the they ground the cutting edge on cement.
You're going to see lines gouges they'll be very rough if you run your finger up and down it
those will need work.
Quite a few knives that you'll run across like this one's OCC tools flex cut beaver craft
those cutting edges will come honed down properly and
with the right edge grind and cutting edge angle on them.
The right cutting edge angle you're going to want to look for will be between 12 to 20 degrees.
I'll be referencing from this side to this side with the point as the angle.
You want it between the 12 to 20 degree range because if it's too low than that it's going
to be a bit too flimsy and it might start rolling on you depending on the steel.
If it's much wider than that then you're going to start experiencing
the knife being harder to push through and it won't slice the wood off as easily.
All right let's go over some of the steps I take to
profile and actually grind a good edge on the knife.
Starting off just so you have an idea what I will be doing.
I will I'm going to be doing it to this knife right here which is just a cheapo knife
that I had lying around that is dull and needs some work on it.
Now this is a cutting angle that you're going to see from the knife like
looking at like this so the point right there is going to be your cutting edge on the top
but what we're going to be doing is taking your knife edge which is this is going to be your
cutting edge angle and then it's usually going to have a micro bevel on the tip of it right here.
Sometimes if this tip is too the angle is too wide it can make it so it's a little bit harder
to carve but if we grind that edge back a little bit you can see that I made it a little bit more
of a narrower cutting edge angle on the on the bevel. It helps it slice it helps the blade slice
to the wood a little bit easier and you can get a little bit more of a razor edge to it.
I did that to this Great Eastern Cutlery number 62 pocket carver and it greatly improved the
the cutting potential of the blade. I think it was a major improvement on it.
You don't want to do this with knives with really soft steel because otherwise you're
going to probably screw up the edge and it's just not going to hold that edge very well
but this that's what we're targeting right here. In this case we're taking the
the micro bevel and we're grinding it back a little bit to make the front part a little bit
of a smaller cutting edge angle. Now if you end up having a blade where the edge is just
really really steep now this is going to be exaggerated here but if you have a knife with
a cutting edge angle that's really really steep it's going to be harder to cut through it and you
can use your sharpening stones reprofile that the blade so that you take that cutting edge
down a little bit. This usually requires a lot of extra work like if you're trying to remove
all this extra material right here so you have this much finer edge that can be a lot of work
but but sometimes it'll be way worth it depending on the the tool itself so that's just something
to keep in mind. Alright so we're gonna slightly reprofile this cheap pocket knife I had lying
around. I already have for the most part the profile that I'm looking for on it but it needs
some extra work so I won't be doing a whole bunch of grinding back the metal but I'm going to start
off on the 800 to 1000 grit side for this one. Now this is an oil stone not a water stone so
just be slightly different than yours if you get your own sharpening stone make sure you read the
direct the preferred directions from the manufacturer it's going to help you a lot
and make make life a little bit easier. Alright so what we're going to be doing on on here we're
going to be taking the knife and putting in at the cutting angle that we want. You don't have
to be perfect I do it by hand and kind of eyeball it if you have those fancy super accurate blade
sharpening things that you can pick the right angle that you want you can use those. I just
I've been doing this by hand for 20 years so it's it's what I've preferred to do. So just take the
blade hold it at the angle you want on the stone and then drag it back and forth on it. You can go
back and forth on the stones you don't want to do that on the leather straps or even sandpaper
because then you'll start cutting through it. Now if you're sharpening a blade that has a curved
edge to it you're going to want to kind of seesaw it or rotate it out you'll find your own rhythm
to how you want to do it. I personally like to kind of seesaw it a little bit
and then make sure you switch sides and just do it to the other side. At this point we're not
worrying about making it super sharp we're just worrying about getting the right angle on it.
Sharpness will come later when we do the honing. So this with the stone the goal is to remove metal
and reshape that edge. I like to use two hands on the knife I don't like to just use one hand on it
because then I will find that my angle will start to vary. So I like to put my finger on the
the knife itself and help guide it that way it's more control on the angle that I want.
I want you to do it to both sides several times inspect the edge and make sure that it is indeed
at the right angle you want. Make sure it's ground down right you'll you'll see if it's
inconsistent because it'll be kind of wavy if it's a different edge. You can tell right here
I didn't get much of that ground down on that side so I got to work on that side a little bit
more. All right that's a little bit better let's make sure you even it out. Now keep in mind for
most wood carving and whittling knives you will not have to do this at all. They will be at the
right angle that you're going to need but if you're trying to reprofile your other knives to be more
wood carving friendly this is what you're going to want to do. All right that looks about right
for right now I'll be good for enough for the demonstration. I'll just wipe off my stone here.
Now that that is done with we're going to want to start working our way downwards
grit level wise so we're going to go basically from finer to finer grinding material. In this
case I'm going to work down to my sandpaper and then I'm going to use my leather shop to hone
down the edge. You can go from the stone to the leather strop it's completely up to you
but for this one we're just going to go to the sandpaper so I can demo it a little bit for you.
This one is a wet dry sandpaper I can use it both wet and dry. I can also clean and clean
off any of the metal bits by just wiping water on it which is quite useful and they also typically
last a little bit longer. So when you're sharpening the edge on sandpaper you don't want to go back
and forth like you did on the stone. Instead you want to keep an eye on the cutting edge
and you're going to put it that edge down and then push away. You don't want to cut that edge
into the sandpaper otherwise you're going to do one of these numbers right here and just cut off
a chunk of it. So you're just going to be pushing it and then again you're going to be kind of
rotating doing a little rocking motion on the blades if you're using a curved blade. If you're
a flat blade you can just hold it flat and then just push keep even pressure on it. Those are
usually easier to sharpen. So for this just keep it at the same angle that you're using on the
stone and push the knife away from you and make sure you are getting both sides. Again at this
point I am not too terribly worried about making it super sharp. That will be done at the honing
stage and since this is a thousand grit sandpaper it will polish that edge just a little bit so
you'll start seeing some shine start coming out of it. So this one what we're going to do for this
is alternate back and forth several times. Make sure you get a nice even grind back and forth.
All right that should be good enough. Now we're going to the the honing step. We're going to be
our leather strop with green polishing compound on it and this is where we're going to be able to
make that super nice razor sharp edge. We're going to be doing this in the same motion as
the sandpaper because we don't want to cut into the the leather or you will be like taking off
chunks of it like I did right there. It will damage the leather and also make inconsistent
bumps on it. Since these one the leather strops are a bit more expensive to replace
it's ideal to take it slow. You don't need to like really push into the the leather at all just
place it down hold it flat and then just draw it across. All right so now that you
you see how I do that now we got to learn how to maintain those cutting edges on your
knives while you're actually using them. Now ideally you're going to want to hone your edge
with your leather strop every 20 to 30 minutes. If you're whittling something that's a little bit
denser and harder to cut through maybe drop it down every 15 to 20 minutes. Now when you're
stropping your knife you don't necessarily want to push down on it like I said earlier
and you also don't have to hold it completely flat. What I like to do is hold the knife flat
to the leather strop with by using like my pointer finger on it just to make sure that
I'm not rocking it back and forth and I also like to tilt it up just a hair. You don't want to do a
whole bunch of it like that but literally just tilt it up a hair and then run that knife across.
This is creating a small little bevel on that edge and it helps keep that edge nice and sharp.
If you do too much of an angle you can start ruining that nice razor edge that you have on
there so you don't want to do that. You do maybe 15 to 30 passes on one side and then you flip it
over and do the other side. You don't have to go do one pass and then do the other side immediately
afterwards. You can do like 5 to 10 on one side and then flip it over do 5 to 10 on the other
side. I've seen people where they kind of count it down like they'll do 10 on one side and then
they'll do 10 on the other side and then they start over again doing 9, 8, 7 all the way down to 1
and that helps maintain a very consistent and even cutting edge to it. Now the flat
bladed knives are much much easier to do. When you start getting into the curved blades on there
you're going to have to kind of rotate the blade on the strop. Now what I like to do with the
curved knife is I'll hold the edge down just like I did with the flat knife, raise it up a hair
but as I'm pulling it down I will rotate that edge so I'm making sure I am making contact with
the strop on all sides from the the hilt all the way down to the tip. Now since the edge is making
contact with a leather strop for a much shorter period of time compared to the flat knives right
there you might have to do a couple more passes. That's just going to be normal that's going to be
how it is but the the curved edges are not too terribly hard to do. Try and do this left-handed
in the camera for you without bumping it but you get the general idea. Now after you're done
sharpening and honing your blades you're going to want to care for your blades as well. You're going
to want to make sure you wipe off all the fingerprints, the oil from your fingers, any oil
or water from your oil or water sharpening stones with a nice clean cloth. This prevents your
carbon steel blades from rusting and corroding. It just helps make them last a lot longer
and now if you're putting them back in storage there's an extra step you might want to look into
doing which is putting a little bit of 3-in-1 oil on there. This helps a lot for just maintaining
that the knife that way it's not oxidizing or rusting accidentally. Like here in Florida I'd
want to coat them before I put them in storage because we have high humidity so then the
humidity might damage the blade. Now if you found the video useful please feel free to like and
subscribe. It's a quick and easy way for me to get feedback and lets me know you enjoyed the videos.
All right as always thanks for watching and have yourself a great day!
