12 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney #HowTo How to Use a Wrench
Tool Tuesday - Nuts, Bolts & Wrenches
I show a lag screw, but most people will refer to this as a lag bolt.
Galvanized finish - meant for outside
SAE - American wrenches sized in fractions
Metric - wrenches based on millimeters
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo
hey kids so we're back with tool Tuesday
this week we we took that week off last
week just thought it was the appropriate
thing to do considering everything
that's going on in in our country so
what we wanted to pick back up where we
left off and I think I need to take a
couple steps back before we move forward
because there was quite a few questions
about pliers and bolts and nuts and
washers and all that so I just kind of
want to cover that so you know what I
was referring to and then we're gonna
introduce wrenches I'll try to keep this
fairly short but yeah so we'll get into
it I'll move the camera a little bit
closer but before that I'll go I got a
dad joke for you did you hear about the
circus fire it was intense anyway so
here we go um I'll move the camera and
we'll get started okay so here's a
close-up of what a bolt looks like a
bolt and a washer okay it's just a flat
washer and then here's a nut okay that's
what's called a nut this is called a
bolt and then those are meant to work
together okay and then you also use a
locking washer it's got a little spring
it's kind of set cockeyed like that so
so that when you tighten it down it
creates tension which keeps the bolt and
nut tight and they stay together okay so
and then this is a lag bolt it's just
basically the difference is it's got a
pointy end cuz it's meant to work kind
of like a screw we wear some
applications you're not going to be able
to get that nut on it you would drive
this like if you're gonna hang a
basketball hoop or something you on your
garage and you can't can't get a nut on
the other side you would drive this into
into the wood okay and I'll show you how
that works so I'm gonna introduce
wrenches this time but I thought it was
important to kind of take a couple steps
back because we're gonna go ahead and
show you kind of how that all these work
together okay so here's how you would a
basic real simple I mean there's other
variations on this but we would stick
we'd stick the bolt through with the
washer with a flat head washer so that
when you tighten this this head doesn't
get pulled down inside the wood okay so
we got a flat washer there now we put
another
watch her on the other side okay and
then we put on that locking washer like
I was talking about okay and then now we
put our our nut on okay and then you're
just gonna finger tighten it first get
it down there get it close okay so now
this happens to be a half-inch wrench
it's got an open end and it's got a
closed end and I'll show you what that's
for
but for this unless you have two sets of
wrenches where you got or even a socket
set will introduce sockets later but
where you got half-inch socket and a
half-inch wrench you're gonna need
something to hold that other side and
that's where pliers come in okay and
remember how we talked about two
different two different adjustments on
this if you tried to grab this let's
grab this try to grab this here it
doesn't fit really well so you open it
up and then it fits really well see then
you can grab a hold of that okay because
you're gonna need something to hold on
to that other side okay while I tighten
this side okay so that it'll hold that
bolt while we're tightening it and as
you tighten it down you can see that it
it's squished down that that locking
washer right can you see that it was
open and now it's closed and what that
does is it creates tension so that this
thing won't work loose right if that
wasn't there and you were using this on
maybe a wheel barrel or something over
time all that shakin from the wheel
barrel will get that thing to come loose
if you don't have that locking washer so
that's what that's there for okay so now
remember how we talked last time about
vise grips and this is what I was trying
to describe if you if you overuse vise
grips and you don't use the right tool
see how this fits on here nice and clean
fits on there clean and because it works
on those edges you overuse the wrong
tool and you you're trying to brief on
it to get it off you you can round you
know the thing will slip and then you
round it off right and you don't want to
do that so
but this is what I was talking about
with the vice grips too so if we put it
there
we can loosen it up get it closed and
then I could get a good grip on it right
if you're trying to get something off
that's hard to harp that's been rusted
okay so this is the lag Bowl and see how
it's it's got a thick Center right so
there's a thick Center there so when you
use this you really want to use it you
have to put a you have to drill a hole
first right because if you tried to cram
this through this would it be really
hard right so what you want to do is you
want to have a pilot hole that's a
little bit smaller than that inside okay
a little bit smaller than work see how
the threads are sticking out a little
bit smaller than that so you don't want
to make it too big because if it goes
like that it's not you know I can it's
not going to hold anything so you go a
couple sizes too small to get rid of
that wood inside and then now you can
use this and drive it in right wrench
this is so much easier with a drill I'll
get to a drill I think it's probably
gonna be two weeks and we'll do the
drill okay
but that you know it's it's biting now
it's creating its own threads inside
that wood if you try to do this without
without drilling a pilot hole you'd be
it would take forever and then you get
the wood start splitting in stuff so you
don't want to do that okay
this is a basic um cobalt brand is good
I've had good luck with them there's
some brands you can spend a lot more on
and so I'm you can spend a lot less on
so cobalt is a good quality mid grade
pretty much everything I've bought
that's cobalt the quality is good but
this one had came with two different
kinds it's got the sae which is
basically the American I think it stands
for Society of Automotive Engineers I
think back in the early 1900's they they
had to standardize on how they were
gonna
on the wrench sizes and that sort of
thing so they came up with this standard
and basically what it is it just works
3/8 7/16 1/2 inch it's basically just
like your standard American ruler the
rest of the world's on metric right but
we're on inches and you know fractions
of inches so that's all that is it's got
both sizes here too right so anyway it's
pretty basic so I don't think too much
detail you just it's got an open end and
a closed closed end so open in the
closed end close in quick but if you're
having to do a lot you can really you
know you can make make a lot more
progress putting that thing on and going
around and around so okay that's about
it so I hope you learned something this
time and I think I'll probably do
ratchets next time ice or ratchet and a
socket set and then we'll do the drill
after that because they're they're kind
of all building on each other so okay so
before we finish this video up I just
wanted to show you real quick because I
realized I didn't cover this in the
video the difference between the two so
this was this is a bolt right and it's
kind of shiny this is a lag bolt and
it's got a dull finish on it you can get
both you can get this in a galvanized
finish too so you can get bolts that
look like this but the reason for this
this is called it it's a it's galvanized
and galvanized just means it's got a
coating on it to protect it from the
weather so if you got a project that's
going to be outside you want to go with
galvanized okay galvanized bolt and nut
and locking washer everything galvanized
right because it'll withstand the
weather better so anyway I thought it
would be smart to go ahead and tell you
what what the difference was so anyway
thanks for tuning in and we'll see you
next time on tool Tuesday god bless you