2.2K Video Views·May 3, 2025 #DadHowDoI #RobKenney #HowTo Hey there! Today, I’m sharing some essential car tips to help you keep your vehicle running smoothly and safely. Whether it’s checking your oil, maintaining your tires, or understanding basic car care, I’ll walk you through the important things every driver should know.
Taking care of your car doesn’t have to be complicated—just a few simple habits can save you time, money, and stress down the road.
I hope this helps—remember, you got this!
If you found this video helpful, don’t forget to like, subscribe, and share. And as always, I’m proud of you!
Blessings,
Dad
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi
Facebook: / dadhowdoi
Instagram: / dadhowdoi
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo
Disclaimer: This video is produced by "Dad, how do I?" for informational, educational, and entertainment purposes. Some projects and techniques may not be suitable for all ages or skill levels. "Dad, how do I?" is not responsible for any damage or injury resulting from the use of the information provided. Viewers undertake DIY projects at their own risk, and "Dad, how do I?" assumes no liability for property damage or personal injury. Always practice safety when using tools and equipment.
#AutoRepair #CarHacks #CarMaintenance #DIYCarTips #CarCare #VehicleTips
hey kids so today I'm going to show you
how to change your car's engine filter
different from a cabin filter but this
is the one that's in your engine might
be a little different on your vehicle
but this is how you do it on mine but
first I have a dad joke for you did you
know that Marty McFly didn't really
drive his DeLorean very often yeah you
might say he drove it from time to
time okay let's locate the engine's air
filter and it should be something like
this here it is on mine there are four
Clips located here here here and here
then I have a screw that I'm going to
loosen to remove that hose that's
attached to it so I open the clips 1 2 3
and four on the back side now I'm going
to loosen the clamp that's holding that
hose on you could probably get by
without that and just kind of lift it up
but I thought this was easier just go
ahead and loosen that clamp and then
remove the
hose now just lift off the cover and
there's our filter now let's go ahead
and remove it and you can see it's a
little bit dirty and just pay attention
to which way it's facing sometimes
there's a notch on it to show you which
way it's facing but in this case it's
just a rectangle so it's pretty pretty
easy and then just go ahead and put the
new one back in make sure it's seated
good down in there and then we're just
going to replace the cover do just the
opposite of how we removed it so we're
going to I'd put that hose on first go
ahead and attach that make sure that's
good and then you can just adjust it to
to get get it seated properly so that
the clips can clamp back on we'll go
ahead and clamp those back on and
that'll force it back down you might
have to wiggle it a little bit to get it
to seat
properly then just go ahead and we'll
screw that clamp back on to make sure
that hose is good and
tight and you're good to
go first thing you want to do is locate
the positive and the negative you want
to disconnect the negative the positive
will be red or have a plus sign on it
and the negative will be black or a
minus symbol so you want to disconnect
that one first I'm using a 10 mm socket
which is pretty common for this
particular task now we're going to
disconnect the positive now that the
negative is disconnected so we just
disconnect the positive my battery had
this insulating cover that just was
around it maybe that helped with the
life of the battery I'm not sure your
battery will be held in place somehow
and so this has got this little tie down
down at the bottom here see that so
there's just a little bolt on it that
I'm going to have to loosen to lift that
out of there to get down in there I
actually needed two extensions so I have
a shorter extension and a longer
extension to be able to get all the way
down there then I just loosen that up
this is a 12 mm socket for that bolt and
once you loosen it with the wrench you
can just spin it by hand to to remove it
the rest of the way and then I pull that
clip out of there and just make sure you
put this someplace where you can find it
right it's easy to get excited and get
into the job and then you forget where
you put this stuff so set it somewhere
obvious so you know where to find it
when you need to put it back I like the
design of this tie down you just slide
the battery forward then so it's clipped
on the back just by you sliding it back
there and then so you slide it forward
and pull it out so we'll go ahead and
get the battery up here you can see
there's covers on the battery terminals
right so you're going to end up removing
those I have seen memes showing those
things still on and so you got to make
sure to remove those but we don't need
to remove them just yet let's get the
battery in place place first make sure
you're putting the battery back in the
correct way right you're going ahead and
have the positive side on the left side
just like you removed it and the
negative side on the right side I'm just
checking to make sure it fits but we
still need to actually put that um
insulator back on so we need to have
that make sure you have the the cutout
on the bottom right so that allows for
those clips that are going to hold the
battery in that's why those cutouts are
there and then there's a cutout on that
other side I'm not sure why that's there
maybe to make room for the the positive
side but you don't really need that so
anyway so we're going to slip that down
and then we can go ahead and slide it
back okay so now it's in place and then
we just got to put that other clip back
in we're just going to go ahead and you
see your hole down there so you know
what you're doing put that clip down in
there cuz you're going to have to kind
of feel for it as you're putting the
bolt back in you want to kind of feel
for that bottom hole it might take a
little bit to get it started and then
once you get it started you can go ahead
and use your ratchet and tighten it all
the way down okay so we want to connect
the positive first so your red one right
there you got to remove that Red Cap
let's remove that and then we'll go
ahead and connect the positive right
just the opposite of how we removed it
right when we removed it we removed the
negative and we we removed the positive
second now we're putting the positive
back on and then we put the negative on
last make sure it's seated down in there
good and this one has a cap that might
fall off like that that's okay just snap
it back on and then it'll cover back
over the top so but before we do that we
want to just tighten it down so make
sure it's a good connection there right
and then tighten it back up don't
overtighten this but you want to make
sure it's snug so that it
holds now we're going to attach the
negative you got to just make sure to
remove that plastic cover first right
you don't want to leave that on
otherwise you won't have good
connections you got to remove that and
then we're going to go ahead and attach
it and basically what we did with the
positive side we're going to put that
down in there and then tighten it up
good and that's all there is to it
okay so the first thing we want to look
at unless if if you left your lights on
and you know it's just your battery just
needs to be charged um but if there was
nothing that you you weren't sure what
exactly happened then really you just
want to look at the at the connections
right so it could be CU a lot of times
if you don't pay attention to your
engine these connections can be horrible
okay um mine are pretty clean and I I'm
pretty sure actually in my case my
batter's just its life has just run out
but as you can see my connections are
good there's no corrosion here but a lot
of times when you lift this up there'll
be a lot of corrosion and that's what
this tool is for okay it uh this cleans
the post you just stick it on the post
and twist it around and then this fits
up inside that connector to clean that
out okay so we're at the dead battery
right that's where we start and an easy
way to remember this is Red Dead so
we're going to connect the red to the
red on the dead battery okay
um but before you do even do that you
want to look for a place that you're
going to put the black one that's a
ground you would think it would go here
but that's actually what everybody's
scared of cuz that can cause a spark
when you actually connect that if you
connected it to here I used to do that
when I was younger I never had a problem
but just for safety reasons we want to
connect the black to a ground um in
newer vehicles I think there's an
obvious place where a ground is but you
want an unpainted uh surface that is a
ground and be honest with you the best
one I'm seeing is this right that little
nut right there is a ground that I'm
going to use okay so we're going to go
ahead and connect we'll just leave the
black and we want to connect the red to
the
dead okay this battery is dead there's
really nothing going on this is just
sitting here okay we're going to go over
to the other car the car with a good
battery and I'll show you what we do
there okay so now we're at the the car
with the good battery and we go ahead
and connect those and we connect the red
to the red terminal okay and you can
just put it right on right on there
that's good and make sure that this is
clean too right so we're getting good
connections make sure you get a good
connection so now we're back at the dead
vehicle's battery and like I said you'd
think you'd connect it there to the
negative but you're actually not because
there can cause a spark and if something
if there's some gases it could cause you
want to connect this to that ground that
we talked about okay so right here
connecting it to that make sure you get
a good
connection okay so we're back in the car
with the good battery we're just going
to go ahead and start it up
okay okay and so depending on how uh how
dead that other battery is you might
need to let this run for a couple
minutes and you could even especially if
you're working with two people uh you
could they could rev the engine while
you go ahead and try to start that other
car okay and then also when you're in
this car make sure everything's off no
heater no uh radio nothing we just want
to have it all the juice going to the or
the dead car's battery okay so we're
back in the van the one with the dead
battery we're just going to go ahead and
give it a shot that the other car has
been running for about a minute or two
and we're just going to go ahead and
give it a shot
okay oh ins start the Bruce Stein the
tring in
there we go it's running okay so in my
case the I think my battery is just over
its lifespan they usually last it
depends on the the quality of the
battery anywhere from 6 to 12 years
really depends but um what you would
normally do if you just left your lights
on and you know that it was just that
and that's why the battery was dead now
you would want to drive around you know
drive your vehicle for 10 15 minutes and
then you know don't go too far in case
you have to if if you park somewhere
then you may need to jump again right so
just be smart about that drive around
for like 10 or 15 minutes come back to
where you have a good vehicle and then
you can go ahead and turn it off and see
if it starts back up so now that this is
running um I'm going to go ahead and
show you how to take the cables back off
okay so now we're just going to remove
everything just the opposite of we did
before okay so you're going to remove
this okay we took that off and really uh
you could just go ahead and remove this
right now if you wanted to the only
tricky part is you just want to make
sure that the the ends don't touch so
just to be safe we're just going to set
this here and you just want to set it
somewhere where it's not setting on
anything metal okay so we're back at the
good vehicle battery and we're just
going to remove it like I said just
exact opposite we put things on we're
taking off the negative now nothing's
going to spark right there's nothing the
two Just The Two Reds are connected but
then just remove that okay now there's
nothing there's no spark because that
thing only connected to the red on the
other side so nothing to be scared of
there okay let's go back over to the
other vehicle okay so this is the last
step we're just pulling this red off of
here right I want to remove that and
then actually I did is put that other
cap back on on the positive you always
want to put that back on we'll do that
on the other one make sure when you go
ahead and remove the cables from the
good car that you put it back how it was
when you started so if we look down
here right this cap just needs to go
back on top of here if that protects the
corrosion and you just want to make sure
that that's going to stay good for a
long time for
you okay first we need to actually open
the hood and that's usually somewhere
right over here it could be up
underneath your dash somewhere along
here but this one is right here and I
just pop that so now once it's popped
like this there's a safety latch here
and you just got to feel around for the
safety latch I found that they're
usually on the left side of the the car
so you seal around for it and I can seal
it right there here it
is so that's it right there so if you
remember the the term wash boats that'll
help you look around your engine and and
uh look for the fluids that you need to
look at okay I'm going to show each one
of these as a closeup at the end wash
boats okay so the wash stands for your
washer fluid that's that's the fluid
that goes in your uh Pier for your
windshield wipers and then b stands for
your brake fluid is right over here in
my on my car that's what this is you
need to take a look at that okay so o
stands for oil okay and here's your
engine oil you need to check that and
then a stands for antifreeze right here
um it goes in here it's also right here
too but you never want to ever open this
when it's hot okay T stands for
transmission fluid and in my in this
particular car my transmission fluid is
right here s which stands for your power
steering fluids my particular power
steering flu is right here and you can
see on the side whether it's full or not
okay so I'm going to get a closeup of
each of these and then we'll wrap up so
here's the washer right the fluid for
that goes in the for your windshield
wiper you just open that up and you'd
add some if you need if you needed it
you'll be thankful that you check this
if you're on a trip and you get mud
thrown on your on your windshield you'll
be thankful that you remembered to check
this okay and this is my B this is my
brake fluid right here okay and I you
could see on the side and tell you um
minimum and maximum you want to make
sure that that has uh that's up to the
to the max I like to try to keep it
don't go over but you need that for your
brake fluid uh need for your brakes to
work CU your brake brakes work with
hydraulics and so that fluid needs to be
be there so that it can so your brakes
can work properly the O this stands for
oil and it's used they're usually yellow
and then you just pull that out and
check that okay and this looks good um I
have a video on that but anyway this is
just for quick reference to for things
to look at okay this is the coolant
keeps your engine cool it flushes water
um and antifreeze through so that's the
a stands for antifreeze
you want to double check that and make
sure that that has something in it too
make sure that that is uh just check the
mark to see to make sure that that um
has the proper amount of fluid in it so
this is also um your coolant okay but
you you usually don't want to even touch
this just leave this closed and de use
the other um Reservoir that's what you
you want to keep an eye on okay and you
especially don't want to open this when
it's hot and you can look right here on
my particular engine is this red
I think you can see that that's my it
says at oil automatic transmission oil
okay so that's something you want to
check when the engine's running you pull
it
out and check it while it's running okay
and that's the
T the T in washbon and then this is the
power steering to it says it right on
top of it right that that's the uh s
and uh in boats that's power steering
okay and you look at that and you can
see it on the side whether it's full or
not if not you just open that up and add
a little that usually is good for the
life of a vehicle so you shouldn't have
to mess with that but if you're
steering's tough or Uh something's wrong
you might want to take a look at that
and then you might have bigger problems
but at least that would give you a sense
of what's going on