If you want to help support my mission of encouraging and empowering people, please visit my Amazon store. When you buy things from my store that you would normally purchase through Amazon anyway, a small percentage goes to support my cause. I have also included items that I can feel good about recommending.
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
Disclaimer: This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
AI Generated·May contain errors
Hey kids! Today I'm going to walk you through the steps to replace a thermostat. Yours might be
different than mine, but I'm going to walk you through the steps to replace mine. The existing
one actually worked fine, but sadly the manufacturer decided to no longer support controlling it
through the app. That was one of the best features that we really liked about it was being able to
be anywhere and control the temperature in our home. For example, you know, if you're away from
your home and we would say, did we turn off the heater? Couldn't remember? Just look at the app,
there you go, right? Or if you're away from home and you want to warm up your home before you get
there, like maybe you've been away for a little bit, you want to warm up the home, you just go
to your app, turn it on 10 minutes before you get home to kind of heat up the house before you get
there. And we really liked that about it. So the manufacturer of the thermostat that we had
wanted us to buy a whole new one from them that would be supported in the app and it was close
to $200. So we found this particular one that I'm going to show you today for just over a hundred
dollars and it had great reviews, so we decided to go ahead and try this one. So we recently had
our furnace replaced and we asked them to quote replacing our thermostat just to see how much it
was just to get a rough idea. I knew I was going to do it myself, but I wanted to know. So we were
quoted $800 for an app-supported thermostat with the install, so it included the thermostat.
So by doing this yourself, you're saving a minimum of $500. So before we get started,
I do have a dad joke for you. So what do you call an alligator that's wearing a vest?
An investigator. So anyway, let's get started. So this is our current thermostat that is no
longer supported in the app that we need to replace. So we have this switch on our furnace
that we just need to turn off. You might not have this, so you might need to actually turn yours off
at your breaker panel. So the existing thermostat actually had a backup battery power. So even
though I've turned off the power, it looks like it still has power, but it doesn't. So I just go
ahead and remove that. Now you'll want to take a picture of your current wiring, just so you have
that for reference. And then also see these tabs right here? You can push on those with a screwdriver
if you're having trouble removing the wires. This one won't come out, so I push on that tab and pull
it out. And just go ahead and remove all of the wires. Now we're going to unscrew it from the wall.
Now we're going to go ahead and remove the face plate and the wall covering.
And look at that. Looks like we're going to have to do a little bit of touch-up paint because
I don't think the new face plate is going to cover that up. So we'll have to figure out.
We'll deal with that probably later after we do the install. Now I need to figure out how it's
going to mount. Looks like that red fastener right there actually might match up with my new face
plate. And there's another hole on the other side. Maybe that's going to work too. So we'll try that
out first. So now you just want to feed the wires through that opening there. And it looks like
these holes are actually lining up for me. This might be different for you of course. You might
have to install some fasteners to get those screws to be able to hold to something. But I don't need
to. My holes actually line up exactly perfect. So I'm going to go ahead and mount it. Put in the
screws. Now I actually printed out this cheat sheet for myself to make it super easy. And just
go ahead and follow it and reconnect the wires. Again the power is still off. Now for me I like
to just go ahead and get this get the wires kind of close to where they need to be. So I see that
that blue one's going to go there. And then I'll just kind of do the same thing with the other
wires. Get them close to where they're going to end up going. Now I'm going to go ahead and start
connecting the wires. I'm going to start with the blue one. Doesn't matter which one you start with
because the power is off. So we're just going to get that in there. You might need the screwdriver
to push in to to get it to actually seat. But see how that's actually went ahead and snapped in. Now
I'm going to tuck that blue wire away because you don't have a whole lot of room here. You got to
get those wires out of the way because there's not a big cavity on the cover. So you can't have a bunch
of wires hanging around. So as we do these individually we're going to put them in and then
we're going to tuck them back inside that hole. So we're going to just go ahead and continue to do
that with each wire. You're going to make sure it snaps in good and then tuck it away. Snap in good
and tuck it away. I'm not going to be able to show you this great because my hands are going to get
in the way but you get the point. Okay all the wires are connected and neatly tucked away.
Now we're going to install the cover. See that cavity right there? That's the little area that
they give you for those wires. That's why I had you tuck all those wires away into that hole.
Otherwise you wouldn't be able to get this cover on. Once the cover's snapped on then I'm just
going to go ahead and turn the power back on. Now it's just going to walk you through some prompts.
You just need to follow the directions. Pretty simple. So we want English. Next. Home. Next.
Thermostat. We only have one thermostat. Next. Cooling and heating. We have both.
Forced air is what we have. Next. Gas. Oil. We have gas. Next. Standard efficiency. High
efficiency. We actually have a high efficiency. Next. Number of cooling stages. We just have
one stage. Y wire is connected. It tells you right there which ones are connected and which
ones aren't. Number of heating stages. We actually have two stages so I need to change that. Done.
Saving changes. Do you want to connect this thermostat to a Wi-Fi network? Yes. Searching
for wireless networks. I'm not going to go through this with you because I don't want you to know my
password but anyway you can figure this out for yourself connecting to your Wi-Fi. Then enter the
date and the time. Then you can actually change the color of the screen. Kind of nice but I actually
prefer this blue so I'm going to stick with that. To connect through the app mine came with this
card and you just scan the QR code. Now you're going to want to download the app so you can
control the thermostat remotely. So you just go here. You're going to type in your email address
and then your password and you're in. At this point it's pretty intuitive. You're just going
to be able to adjust your temperature and you can actually even set up schedules but I'll just let
you play around with that. I'm not going to spend a whole lot of time with it. All right. I hope that
was helpful for you. Obviously you know yours isn't going to be exactly the same as mine but if you
just pay attention and look online and make sure you know where those wires are going. Right. If
you just take it slow make sure the power's off and connect those wires. Make sure they're seated
good. You should be fine. So just be careful with anything when you're dealing with electricity. You
just want to be smart so but I'm sure you're capable. There's enough resources online you
should be able to do this yourself. So thanks for watching and God bless you.