26 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney #HowTo How to Change a Doorknob.
I show you how to remove and install a doorknob.
I also show how to open a bathroom door through the little hole.
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo #Doorknob
hey kids nice to see you again uh
so i've had quite a few requests for how
to change a doorknob
so um it's fairly simple um
especially if you know if your home is
uh
within the probably built in the last 40
years at least in america
they've standardized it so you know
before you get into
older homes you might have to actually
drill holes but you know odds are
that you can just go to the hardware
store and pick up a door pick a door
knob that you like
and it should fit in your and to replace
the the doorknob in your home
um and i'm actually going to show you
how to
uh how to use a bathroom key this is a
little key like this
okay that comes actually with the door
knob so here's like a standard
screwdriver and then that's the little
the little key i'm gonna show you how to
do that because i actually had one
subscriber say they had to break their
door down
because they didn't know how to how to
use or didn't know
yeah how to unlock the bathroom from
from the outside
um but before we do that i have a dad
joke for you
so so the screwdriver uh said to the
bathroom key
said uh you're not awkward you're just a
little dorky
ah so anyway let's get started
okay so the way you remove this is
pretty much any door knob has these two
screws and they're long screws so that
they can get
through to the other side but once you
get them loosened
so you just need a screwdriver that's a
little bit longer like this
and you just kind of come in at an angle
and push on it there you go
and get the other one going
just like that
yeah they're not threaded all the way
through because they just need to be
long so that you can get across to that
other side so
okay i'm getting close and see this hole
here
that's the hole that you can actually
stick that little key inside of we'll do
that a little bit later but let's go
ahead and do this for now
take this apart just set your screw
somewhere
so there's you know your front door um
different doors with different locks
they're all going to be basically the
same as this though
they're going to have two screws like
that and then you just
okay i need to pull that off
and that's what it looks like behind
there okay and then now
we're gonna go ahead let me shift the
camera angle because i'm gonna show you
you gotta
get rid of a couple screws here so that
everything can pop out
but i mean you can should be able to
just slide that out
the back i have to wiggle it a little
bit might be actually locked
see here
there you go okay so that's the other
side
and then now in order to remove this you
may or may not have to remove this but
they'll give you a new one
you know when you buy it when you buy a
doorknob so there's a couple screws here
let me change the angle
okay so that's what that looks like
right and you just got a couple screws
there that you gotta pull out
occasionally i've done this before and
i've actually left this in and i was
able to do it it was fine but
um yeah depending on the doorknob that
you buy you might have to just go ahead
and replace this whole thing
okay and then that should just pop out
of there
there's probably some paint yeah so it's
sticking because of the paint
okay yeah and this is actually a p one
unit so it actually comes like that
so when you go to install it okay well
let's just take a look here
right so that's what you look like right
so the doorknob looks like
before you actually or the hole anyway
and so you start by putting this thing
in and you want to be careful how you're
putting this which way this is facing
because this is going to go back towards
where the door is going to close
so you don't want it like that right
because then this wouldn't push down
right it would bump into the door so you
got to make sure that's facing the
correct way
okay and then we just put it in there
okay and then we put those screws in so
i'm just going to do just the opposite
of what i just did
because i don't actually need to change
my doorknob i'm just showing you how
they work
okay
okay
i try to show you in real time this so
you can see
you know it doesn't you sometimes you
run into little snags
so uh and you got to fight this door
kind of moving back and forth on there
right
okay so that guy's in so we got that let
me change the angle again and we'll
put it back together okay so you can see
how that's shaped
like that right and you can look inside
here and you can see that
that's shaped like that so right so you
need the first thing you need to do is
try to get that in here
and sometimes you gotta play around with
it a little bit i've played around with
locking and unlocking it and you just
gotta kind of
wiggle it a little bit to get it to
there we go
now it just slid in okay so let me pull
it back out
okay so see these long things right here
that's where your screws are gonna go
from the other side okay
so those big long screws that we took
out
these guys are going to come across from
the other side and go into there
okay just like that so just kind of pay
attention as you're building this
so that you you know what you're looking
for so let's put it back in
okay okay we're in
and then now i'm gonna set those holes
there
okay so now i'm gonna flip it back to
the other side
so you can see what that looks like
okay so as we look at this you can see
there's a little half moon there
too and we got to put that make sure
that that guy slides on top
on that other half moon and you got to
kind of hold it from the other side
okay so that's that okay
and then now these holes right remember
when we here let me pull it up
you got these holes right here from the
other side
that i showed you where you're where
your bolts go into your screws
okay so we gotta put this back on that's
where those are gonna go
okay so you just go like that and
remember how they're facing this way so
you just gotta turn those
to get them to line up and you know you
must play with this a little bit to get
it to
be in the actual hole here
keep my head out of the way i can
actually see the hole
and you just want to get them started
okay
get one started and then get the other
one started don't tighten it down all
the way
because then you just want to make sure
that you're set in there good
and then you tighten them both once you
know that that's in there
okay let's see
yeah i think we're good okay and then
all we got to do is just tighten those
back up
and that's as i get close
i just leave it okay
and let's go ahead and tighten the other
one
i didn't tighten it all the way just yet
just make sure everything's seated
properly
okay now i'm just gonna go ahead and
tighten this one the rest of the way
don't over tighten this but just get it
nice and snug so that it doesn't come
loose on you
okay
okay yeah that's all there is to that
so you're ready to go okay now i'm going
to show you how to use this
this little key here okay this and when
you buy
a doorknob it comes with this little key
you might not know that you might throw
it away but
that's what this is for it's in case the
door gets locked
and um and you're outside and you need
to get inside or
or what have you right we want this on
the outside right this is going to be
the outside of our door because
you want it to lock from the inside okay
and then if you
if you get locked out you just use this
little key so let's see here
i'm gonna turn that knob here let me
show you that knob
okay so we're looking at this knob right
and it's unlocked right now
okay but if i turn this knob here
now it's locked okay when i was younger
there used to be
a push button and i don't know if those
are around anymore
um so you would just use you could just
use a bobby pin off that out
on that back side they had a hole you
would just stick a bobby pin or a pin
something sharp just in that hole and
pop it and it would pop this out
but now you actually got to turn this
right because this is being turned
turn to lock okay so now
i'm gonna go to that other side here
um i'm trying to show the see the best
way to show you how to do that but
i'll show it from both sides okay so
here we go
okay so it's locked right now right
unlocked from the outside so you just
got to put this in here and you got to
kind of feel for
for there's a little thing and it'll
lock in okay
now i can turn this to unlock it
okay i just turned it see
now it's unlocked i can actually lock it
from here too probably let's see
yeah you see okay i just locked it up
okay because there's basically just a
flat spot inside there
that you need to find just like a
screwdriver but
you need a tiny screwdriver this works
but
this little door key dorky um
will works but if you have a tiny
screwdriver that'll work too
okay let me show it from the other side
okay so it's unlocked right now
now i'm going to lock it okay and i'm
sticking that
little screwdriver in here okay
and then you can see that i'm gonna
actually turn it see that
turn it from the other side with that
little screwdriver
okay
okay so i want to show you this strike
plate as well and you can adjust this
too if your door's not
shutting properly you can move it in and
out because the hole
in there is just kind of fairly big and
then they put the strike plate in here
and you can adjust this you can move it
back and forth
and one little trick too that i've
learned over the years is
sometimes this door jamb will get
where the screws don't hold anymore and
so you can actually put i've put glue in
and then put a golf tee and then just
put it in that hole
and then snipped it off and then you've
got something you can actually screw
into
seems to work okay i mean it's not going
to be super durable but for a bathroom
door it should be fine like for your
exterior door you might have to do
something a little
heavier duty than that but anyway i just
wanted to show you that because you can
adjust that in and out because the holes
a little bit bigger
on the other side and then you just put
this in and then it's bent like this
so when the door shuts it pushes
remember how we showed you the flat side
and then the round side on the door
on the knob on the
piece that's actually sticking out
that's going to hit this it'll hit this
and push it back so that it
goes inside that hole all right
okay i hope that was helpful for you um
you know
there's gonna be different styles of
doorknobs and uh like i said
um in you know in recent years they've
kind of standardized it so they should
be similar but you if you run into
you know where your house is older uh
you know you might
have a little little other issues but
this should take care of
99 of the people that are trying to
change their doorknob so
i hope that was helpful for you and
thanks for watching and god bless you