I Made Victorian Secret Pants

Victorian Threads
4 followers
2 Video Views·Oct 28, 2024
This Victorian skirt is packed with hidden features! In this video, I create secret pants, a secret pocket, secret knickerbockers, and a secret waistband adjustment. Despite its historical complexity, this garment may just be the most comfortable and practical 19th-century piece I’ve ever made. Follow along as I walk you through the history, design, and construction of these innovative hidden details, leading up to the big reveal.
Timeline:
00:00 - History
07:02 - Design
09:40 - Knickerbockers
18:17 - Divided Skirt
28:03 - Reveal
It's time to start the sewing process for my Victorian zebra fail, and this week I'm getting
started with the lower half of the garments, namely the knickerbockers and the divided skirt.
These are really unusual garments when put in the context of women's garments of the 19th century,
but they have a very popular past to them as well. In fact, the knickerbockers are sort of
the cousins to bloomers, which were popularized in the 1850s and took on their name from Amelia
Bloomer, who was one of the people that popularized them, though they didn't exactly
make it into regular fashion. They were more of a popularity with dress reformers and got picked up
for things like gymnastics and other athletic things for young women, but they never really
made it that far into regular fashion because, frankly, they're not that flattering. So even
though they were pushed as a healthy and much easier to wear alternative to skirts and petticoats,
they didn't really catch on that much when they first came out. In fact, it wasn't really until
the 1880s that that started to change. In 1876, Viscountess Harberton supposedly invented the
divided skirt, or at the very least popularized it, and that is exactly what it sounds like.
A skirt that has a division down the middle essentially makes it into wide-leg trousers,
usually with extra panels in front in order to cover up that split and make it look more like
a regular skirt. This garment was poised to take the Western world by storm because the 1880s was
when there was this huge explosion of cycling, and the new upgrades and designs for bicycles
made it much more achievable and accessible to the average person. Women's regular skirts of the era
didn't adapt well to bicycles. Not only were they too full, getting caught in the chains and the
wheels, they were too long, usually you had layers and layers of petticoats underneath, the entire
thing was very heavy, difficult to do all that movement in, so they were looking for an alternative,
and the divided skirt was the perfect answer for multiple reasons. First off, with the division,
that meant that you could split the skirt over the sides of the bicycle, or even over the sides of a
horse. It meant that there's a lot more freedom of movement for the legs, and that you had less of a
concern of the skirt catching the breeze and flipping upright. This also meant that you could
shorten the skirt, and they definitely did. They went almost up to the knee in some cases, so
it was a really short comparison to what we generally see as the average fashion of the late
1880s, and even into the 1890s, as regular skirts shortened as well. They put a lot of effort and
weight into making sure that these skirt hems still stayed down, no matter what sort of level
activity you were doing, but inevitably with a skirt that short, you were going to see a flash
of knee or upper thigh occasionally, which meant there was a whole new issue. If you can't wear
petticoats underneath of these garments, and the big open ruffly drawers also don't work because
they're not going to actually cover the upper portion of the leg or the knee, nor do you want
your underwear flashing everywhere, we have to come up with alternative options. Some do recommend
things like union suits, which were essentially knit underwear, so you would have your legs covered
appropriately, but you're still flashing undergarments. The answer instead came in the form of
those earlier bloomers. Plenty of women were picking up wearing bloomers for bicycling and
other athletic things as well, but what if we took those bloomers, sized them down a little bit closer
to the knickerbockers that men and boys were wearing, and put those underneath? Because now we
have an undergarment which also can function as an outer garment, so it's perfectly fine if it's
being seen, but it's going to have a very similar fit to those drawers that women are already used
to wearing, just covers the knee and bands down below it, so that way you don't have anything
blowing open. And that means that you're going to find knickerbockers being made in a wide range of
different textiles. Some are better suited to being solely undergarments, such as silk pongee,
lightweight almost sheer silks, and then in other cases they're making them out of wools and heavier
textiles. They generally avoided the really heavy stuff, but something in the mid-weight range that
could be worn on its own, because there's plenty of imagery of women wearing knickerbockers without
the skirt over them. But this sort of created a garment that was in between underwear and outerwear,
because it was fine for it to be seen, even technically in some cases fine for you to wear
it on its own, given the correct circumstances. So it's a pretty practical pairing in many ways,
which is why I wanted to go with that choice. Now of course this is still a set of garments that was
going to be situationally appropriate, given the era. It wasn't something that all women took up,
and it certainly wasn't something that was acceptable everywhere, and it created a lot of
hubbub. When the divided skirt really took hold in the early 1880s, there was a lot of division
about whether or not this should even be allowed to exist. And you know me, I can't go through an
entire subject about Victorian fashion without reading off some of my favorite quotes. So first
up in 1881, we have an article that mentions that dress reformers are now wearing trousers because
they aren't attractive and can't catch attention otherwise, and that the divided skirt can't last
because it will lead to trousers in two or three years. It did take a little bit longer for trousers
to become a normal thing for women, granted, but it did eventually lead to trousers in a way. Another
article in 1882 states that the new divided skirt will prove a dead failure, and it's the worst of
both. It's so ugly it would drive all of the men to the North Pole, and it will lead to trousers and
knee breeches and a bristling sea of legs, which is a wonderful description. But of course despite these,
the divided skirt did catch on. Plenty of people saw the use in that, saw the use in women in
saying that, well, they have two legs, don't they? Why do we pretend that they only have one?
But even as late as the 1890s, once the bicycle craze had fully taken hold, so many women were
wearing bloomers and bicycle suits. Divided skirts were absolutely everywhere. There were still plenty
of people that were very, very concerned about these sorts of garments. An article from 1895
recognized that bloomers were becoming more and more common, saying that some of those that were
seen at the cycling parade yesterday and all around the park every day might better and more correctly
be called by the vulgar name of pants. So there's a lot of concern over these garments, but they still
become very popular, create a lot of effect on regular fashion, and continue to be utilized for
decades after that as alternatives for riding attire and all sorts of sports attire. In fact,
this is really one of the major points where women go from riding side saddle to a stride. So there
are tons of changes that are happening in the social fabric as well as the tailored fabric of
this era. As for my choices, I'm going to be making knickerbockers because I find bloomers to be far
more voluminous than I want for a practical everyday garment to be used afterwards. I am choosing to
put a full waistband on the knickerbocker so that way I can wear them as is by themselves as a
modern-ish garment. A lot of the examples have just a bound edge on top so that way they're not
adding bulk to the waist. Instead, what I'm going to do is focus on that complicated waist stuff with
the divided skirt. Because I need it to go both over the knickerbockers and not, I want it to have
two different waist sizes, which requires adjustability. Thankfully, bicycle skirts and
divided skirts were so incredibly popular, but also really potentially complex in terms of what
was needed, that there were tons and tons of patents trying to figure out how best to make
adjustable and interchangeable skirts. One of the things that I stumbled across was at the Met Museum.
This example there has what looks to be an adjustable waistband, and it mentions in the
description of the garment that it is a patented style. So I went and did some research and came
across this patent for it, and it created a really interesting idea in my mind of how to have
overlapping waistbands that are then adjustable. I didn't like the style of this particular divided
skirt that much. I really didn't want something with all of the external pleats on the back. I also
had fallen in love with this particular drafting of a, what they called, rainy day skirt that I
thought was really cute in terms of the plackets and other little additional decorations up around
the hips and waist area. So I wanted to try and turn that into a divided skirt, but with that
adjustability. The nice thing is, because the vast majority of the divided skirts I was seeing have
these little plackets that are just to the side of center front, so there's one panel in the front
that covers up the split in the skirt, and then usually it's buttoned up at the top, and that's
where the waistbands connect. Instead, what I was going to do was leave that loose. Buttons on those
plackets would instead be false, and then that was the waistband that would wrap around, leaving the
back as is. So the closure would be center front for the main waistband of the legs, and then the
panel that stitched on would flip up and go around the waist to button towards the back in two
different positions. This meant that I had to leave the plackets open in front so that way they could
adjust back and forth, but that also meant that I could hide a little pocket inside. So I do have a
welted pocket hidden in front, could technically have done two, but I felt like that was more than
I personally needed. So today I'm going to be diving into the making of both of those, as well
as some of the fitting of those knickerbockers, because they turned out to be rather complex,
whether I was actually trying to make them complex or not. First up, I'm going back to
the knickerbockers, where after the mock-up in the last video, I realized that I need to drop
out the crotch by about an inch, so it's not too high and tight, and that I needed to raise up the
knee bands by a couple of inches. I had given some extra on the mock-up, so only an inch taken out
of the pattern here. Then I cut the pattern out and applied it to the fabric, marking out both
the stitch line and the seam line, because it's just a lot cleaner and easier that way, in my
opinion. The thing is, though, since this is a plaid fabric and I want things to match up pretty
well, there's no easy way to do it through two layers at the same time. So I marked out everything
on one side of the folded fabric, the front, the back, the plackets, the waistband, the pocket,
all of the different bits, and I'll be cutting those out individually first on one level,
and then I will be applying them to the second level in order to cut everything out from there.
I also worked through making sure that that pocket was large enough for the cell phone,
because it's a really important thing. Then I got to cutting that top layer, making sure that I
wasn't catching the layer underneath. I could have laid this all out flat, but it wasn't too difficult
to cut this way, except along the edge, and that allows me to then go back and double check that I
have the grid lines laid out the exact same way. So everything will be on grain, everything will
match up, the center back, center front, that sort of thing. So I have the waistband, the back, the
front, the placket, and the pocket at the side, and then the plackets down at the knee bands as well.
So quite a few little pieces for this, though it's not really too complicated of a garment.
Started off by stitching up the center back and the center front seams, and then it was time to
get on to all of those tiny little plackets and sides. So for the front, the plackets aren't going
to extend out, but be so much little facings. So that's the very first thing that I'm going to be
doing, is stitching those facings, which are only about an inch and a half wide, to the upper section
on the left side of the front, and to the knee bands as well. I'll be stopping the stitching
before I get to the bottom of those. There's a little bit of seam allowance left to fold up.
This is the center back stitched up, and it has plackets on either side as well, but they'll be
faced with cotton rather than folded over to the garment. So those just get pressed open for the
seams, and we will stitch the cotton facing around them next. But for the front, the pocket gets
stitched to the right side, fully opened there, just as far down as the opening needs to be,
and then the same plackets at the left side and down at the knee bands will be stitched on and
then folded back over and hand stitched down. There is a little bit of work to do on those
first, however, especially in the case of the upper portions of the hips. I first want to reduce some
of the bulk. I did serge the edges of this fabric to make it much faster, so I'm reducing a little
bit of extra bulk there where it's going to be top stitched down. Now there's also a lot of stretch
in this fabric when it comes to the bias at the hips, so I stitched in a little bit of tailor's
tape to that seam, and it stretches a lot less. This is important in terms of facings and pocket
openings, things that are going to get a lot of heavy use and pull and tug in the hip area, so
you want to make sure that those are well established and not going to stretch out over time.
I then did all of the little cotton facings on the plackets that will stick out of the back,
and those get folded in, the top or bottom edges left raw, and then the inner edge is folded over,
and I'll hand stitch that down once I'm sure that everything fits correctly. I know that there's a
chance I might need to adjust some of these side seams before I get that far, so that's what we're
going to check next. Going ahead and doing the side seams and the inseams, connecting the backs
to the front, essentially, so that way I can get to trying things on and seeing how they fit.
The pocket does require a little bit of extra work up at the top, because it needs to be
seamed onto the back as well. Then I can go around and stitch the bottom of the pocket closed.
Because I serge these edges, I don't need to finish them in any other way. I then go ahead
and top stitch over the waistband area so it holds a little snugger while I'm trying things on.
Pocket's ready to go. Everything pinned into place in terms of the darts and pinned to the
waistband lining, because that has much less stretch than the plaid fabric.
The front looks pretty good. Four little darts in the front. Sides are looking good, but the back,
um, not so much, as you can see me starting to laugh there. I have a serious case of the baggy butt.
So now we have to figure out how to fix that problem. Thankfully with the plaid, you can see
the grainlines that we're dealing with. Pretty fast change there if I just lift and pull outwards.
I think that makes the most sense. So we're going to show three different methods of managing to
fix this. The first thing I did was raise it up. So it's pinned up about an inch higher on the
waistband. Already, big difference. However, it's still not enough. So I pinned in about half an
inch center back seam. A little bit better, but still more than enough room in the back. So the
day I came back to it, pinned up the side seams as well, moved the back up further, and made sure
that the shaping of that center back seam was a little bit better. And it is so much better than
it was to begin with. So the answer for this was all three of the different methods to reduce that
back. You can see here the chalk line of where the new line sits, and the edges where the old line was.
So quite a bit of difference made, but not a huge difference in terms of where the actual pattern
would have been drawn. So this is what they look like after I've stitched them back together.
The darts are still pinned in to make sure that they're good. And this is the point where I can go
ahead and start hand stitching back those plackets, because I know that the edges are in the correct
place. So for the front, it's just stitched down to the fabric by hand. And for the back, the
plackets just need the cotton stitched down and then tacked into place. Then I got to doing the
darts in the back and the front, and it was time to start moving on to the kneebands and waistband.
So gathering up the kneebands, as well as darts on that, and starting the waistband on the top.
Like I said, it will be lined in that stiffer cotton. You can see the kneeband there. It's
gathered in the back and darted in the front. This is just the way that the pattern told me to do it.
I don't know exactly why, but it turned out pretty well. Once I have waistband and kneeband stitched
on and faced with the cotton, I turn them right side out, folded the cotton lining over, and I'm
slip stitching everything into place. I then have to do all the buttonholes. Fair warning, these are
buttonhole scissors, so don't worry. I'm not cutting through the edges. There are two buttonholes at
the waist and one buttonhole on each of the kneebands. I could have put two buttonholes on
the kneebands, but the pattern, again, called for one. A lot of the descriptions I looked at had one
listed as well, so that's what I went with. I did keyhole buttonholes, and I use a 30 weight silk
for this. So not quite as heavy as a button twist, but not super lightweight either. For the buttons,
I decided to go with a bit of a contrast. There's that lovely gold stripe running through the check
in this, so I thought it'd be nice to accent that with gold buttons, as well as the gold cotton
fabric for the lining. I'm also adding a few hooks and eyes. I'm doing this as subtly as possible,
which means that I'm actually using an awl to open up a little bit of that side seam there and
inserting the hook in between the seam. So this is something that's easier done on hand stitching,
mind you, but it does bury it a little bit better, in my opinion. It makes it a little bit stronger.
I'm still taking stitches through most of the layers. I try to not touch the exterior layer,
but go through all the seam allowance and really get those well established. Then I'm doing thread
eyes. Since they're right on the edge, I can't do the loop style because that would be visible,
and even the bars are somewhat visible, in my opinion. So I'm just doing a thread style that
will blend in perfectly, a couple loops of thread, and then a buttonhole stitch over the edge. If
you've ever done friendship bracelets, it's the exact same type of thing. So overall, a pretty
simple garment. Once you get the hang of dealing with plackets, there's just three of those and
one pocket, and everything else about it is pretty plain and simple. It's just getting that fit
right, which is always the difficult thing for bifurcated garments. Next, we are moving on to the
divided skirt, which the first challenge is figuring out how to get this massive pattern
out of two yards. It's a really wide wool. It's over 60 inches, so I was fortunate in that regard,
but there is still a lot to deal with here. I ended up deciding that there was no way I was
going to get the leg panels cut out as single full pieces, so I added a seam to the front in the same
place that the panel will overlap, so it will be completely invisible as a seam, and that helped a
lot. I think it also is good in terms of keeping things a bit more on grain. You can see here, I
ended up having to literally cut a corner off of the back there, but that's going to be between the
legs, underneath, down by the hem. You're not going to see the fact that I had to seam on this tiny
little corner, unless you are way up in my divided skirt, in which case we have more questions.
Then it was time to start with the welted pocket. A tiny little scrap of fabric that sits over where
I want the opening to be that will be the welt. I should have cut this a little bit wider, to be
honest. It turned out okay, but it'd be easier if you're not super experienced with this, to have
one that's a little bit broader than that. And I'm just stitching the full rectangles half an inch
wide by however long you want the opening, and I go around all four of the sides in order to finish
it off. And then once that's done, I will clip it open all the way down, making a little V at both
ends, in order to clip into the corners. I can turn the welt to the inside, and I'm not going
to press it completely open. Instead, what I'm going to do is press those little seams that I made
open. So the reason why I do that is because it actually gives me the size of the welt that I
will need in order to close that back up again. So I find that to be useful in that regard, as well
as keeping it clean and flat. And that extra will just wrap up and over, and I will stitch in the
ditch from the front side. It's just easier if I go ahead and iron this first before doing the
stitching. You can see there there's the finished product of it. So the little welt's folded towards
the inside and pressed, and then top stitched through that seam. In order to add the pocketing,
what I'm going to do is open up the same size as the welt and fold all of those edges back,
and then that will sit on top of the open welt and be hand stitched down. There are so many ways to
do a welted pocket. It just depends on what type of method you want to use and what type of bulk
you're dealing with. This fabric was pretty bulky, so I was trying to make this as flat and smooth as
possible, since it's in kind of an awkward area. As for the pocket bag, I didn't serge this garment,
so I knew I wanted to do a French seam. I can't just fold it right side to right side and stitch
it, because then the raw edge will be sticking out. So instead I'm going to do a French seam,
where I'm folding it wrong side to wrong side first, but the skirt is going to be in the way
for that. So I'm folding that up nicely and shoving it inside of the pocket bag, essentially. And then
I'm going to stitch a quarter inch seam around all of the edges, actually slightly less than a
quarter inch seam, and then I will pull the entirety of that piece back out through the
opening and turn everything right side out. It's a fun little magic trick in a way, but this ends
up putting the raw edges of the pocket to the inside, so that way I can then top stitch again
and finish them off both ways. Then it's time to deal with the center front. I could do a regular
fly front here where it overlaps, but because it will never be visible, and because I want to keep
this as flat and smooth as possible, no more bulk in the front than I need, I am just doing both as
little facing pieces. So I'm just stitching the cotton on, top stitching it to hold it back,
folding it, and doing up that center front seam from where they meet down. And then I'm top
stitching around those edges of that placket. Again, yes, this will all be visible from the
exterior, but then I have the panel in front that hides all of it, so this just needs to be clean
and flat and strong enough. So I'm top stitching back and forth where that seam separates there to
make sure that it won't eventually pull open no matter what happens. Then it's time to get to the
rest of the legs. So I'm adding in those little corner pieces that I mentioned trimming off.
Then I stitched up the center back seam where the pleat starts. Then I'm going to be stitching on
this little extra decorative piece. In fact, it's more than decorative in the fact that it will also
strengthen the seam. I'm just stitching through two layers of the back here. I haven't folded it
back together again for that reason. It's much easier to stitch this at this point than once I
finish up that seam. So this is just reinforcing the top hip area and the center back. I'm doing
a double stitch around both the edges. It's decorative as well as making it extra strong.
And then I'm able to stitch up the curved center back seam that will run between the legs. So you
can see why I didn't want to stitch through all of that bulk up at the top. It made a lot more
sense to leave this seam free from that little applique piece. And that's the section that will
be essentially the trousers. You can see here the center front opening completely open, but with a
pocket there. I'm going to be covering that up shortly, making sure that this fits around the
waist, that the darts are pinned where they need to be and the size that they need to be so that
way everything fits comfortably. And then I will be able to move on to the darts followed by the
waistband. Since there is a separate waistband for the trouser portion compared to the front,
I'm going ahead and stitching on the waistband and the cotton facing in order to finish off the
waistband for the trouser portion of the divided skirt. Then I will get to the front, which is done
completely separately. So hand stitching back that facing for the waistband and then we'll be able to
move on to the front. This requires some weird little plackets in the front, so what I'm doing
here is stitching right side to wrong side. So essentially those are going to flip to the front
of the garment so that they're visible, but in order to finish off the edge, it's easiest to do
that seamed towards the front with that little piece stitched over it. So did that, ironed back
all of the edges as carefully as I could with the curves. Thankfully this wool was very forgiving
with the complex curves and corners, and then top stitched down and around that. So this will finish
off the opening at the top, but I'll still have to deal with finishing off the rest of the long seams
in the end. There's a lot of top stitching on these garments in general. Same thing goes with
the waistband. So the waistband is the weird thing on this one that I talked about earlier.
The extension comes off the front. You have these little tabs that are a little bit narrower than
the rest of the waistband because they're going to essentially weave through the larger waistband,
but the front portion of the waistband is the same as the trouser portion. Clipped and turned all of
the edges as carefully as possible, making sure that everything isn't too bulky. Same thing down
at the end. I clipped back that acute corner as well as clipped into those curves. I like to
alternate my clips so that way if I've got two pieces of fabric, they are clipped at different
places so I'm less likely to get little angles. And then it was time to do all that top stitching
again, but it looks so nice and it adds a lot of reinforcement for this reason that I didn't
actually put an interfacing into this waistband. I didn't think it needed the extra strength or the
extra bulk there. The double top stitching is really great at reinforcement, so I wasn't too
worried about that. Next it was on to the hem. The hems of these garments tend to be faced, and they
can be faced in leather, they can be faced in stiff cotton, or any sort of other weighty fabric. Sometimes
they even have interfacing inside of that, but these are pretty broad, four or five inches, sometimes
even more, and then they are top stitched multiple times. The point of this is that you want the
stiffness and the weight in order to keep the bottom of the skirt down when you are doing things
like bicycling. You don't want the wind to catch a lightweight skirt and flip it up. So I finished
off the hems for both the front and the legs separately, and then the front has its edges
folded back, and then the whole thing will get top stitched down that seam line on the legs. Again,
double stitching as well. This seems to be a common way that these are attached, from what I could tell.
It just makes more sense to have it as a completely separate piece. And then to the button holes. They're
a little bit weird. There are button holes at the very ends of these straps, like we would expect
for the waistband, which buttons around the back, but I'm also going to need button holes in kind of
a weird place on the bigger waistband as well, where they're nearly the full width of the waistband,
wide enough to fit that little strap through, but not so far as to cut into any of the top stitching.
And then I was able to start stitching buttons on. There are two buttons on the waistband, making
sure that they are far enough back to get in the right places for the two settings that I need for
the waistband. But then I'm moving on to the buttons that are on the center back and the side
front plackets. These are just stitched on. They are completely false, in a sense, so they don't
actually do anything. They are just decorative. A lot of the originals do have functional button
holes at the front plackets, but I couldn't because I want it to be adjustable. Then there are also
some hooks and eyes at the center front. I embedded these just like I did with the Knickerbockers,
so that will allow me to close up the center front, and I might eventually add in a second
pair of eyes if the overlap needs it. But for right now, it seems to be holding itself in
place pretty well with the waistband. So overall, it seems like it should be a much more complex
garment than it actually is. It's basically just a pair of wide leg trousers with a panel
seamed over the front.
