I spent 140 hours making an 18th century dress for a ball at Versailles

Pre-modern Women's Fashion
182 followers
27 Video Views·Aug 20, 2026
AI Generated·May contain errors
What could possibly be cooler than attending a ball at the palace of Aksai,
being surrounded by hundreds of people in 18th century clothing,
wandering through the palace of Louis XIV and Marie Antoinette as if you own the place
while wearing a full period outfit that you made entirely by yourself.
And if I sound immensely pleased with myself, that is because I am immensely pleased with myself,
especially with this robe a la francaise which took me two months to make.
But let's rewind a bit.
Seven months ago, I bought a ticket to the Fête Galante,
which is a fancy dress event held annually at Versailles.
The event comes with a strict 18th century dress code,
so naturally I had been planning my outfit long before I even had the ticket.
I knew I wanted to make something worthy of the occasion.
So compared to the cotton robe a la francaise I made six years ago,
this one needed to be wider, shinier and fancier.
But not so wide that it becomes a full court dress because
do I look like I can afford this kind of fabric in this much quantity?
For historical clothing, I tend to buy the fabric before I design the dress because
half of the time, finding the right fabric is the hardest part.
Going down the theme of wide, shiny and fancy,
I was hoping I could find a lampas or brocade fabric with those
large, dramatic rococo floral patterns.
My first stop was this website called Silk Resource.
They have a category called French Court, which sounded very promising,
but that was before I saw the price tag and quietly closed the tab.
After several days of increasingly desperate searching, I was ready to give up.
Then a friend recommended a place called Top Fabric of London,
and that was where I found the perfect fabric.
The lustrous sheen of the silk, the weight, the wavy pattern layered over the stripes,
the deliberately feathered effect that mimics Central Asian ikat fabrics,
everything about it just screamed 18th century to me.
Even better, I found an excellent dress at the Met Museum made from a remarkably similar fabric,
so I ended up basing almost the entire design of my robe a la francaise on that dress.
I could happily spend hours talking about this fabric,
but I'm sure you're here to see me actually make the dress, so let's move on.
The first thing I did was to drape the bodice lining.
To get the correct silhouette, I put the shift, stays and pannier all on the dress form before
draping. I'm making separate videos on how I made the pannier and the dress form underneath,
so if you'd like to see how those were made, do subscribe to get the updates.
I also made a petticoat mockup out of an old duvet cover.
Unfortunately though, I cannot show it to you because it's permanently occupied.
I am extremely glad that I made a dress form that is essentially a duplicate of myself before
starting this project, because the first mockup already fits surprisingly well.
I also took a refresher class on draping, which really helped speed up the process.
I followed this class on Crafty, which is the sponsor of today's video.
As my long-term viewers probably already know, I've been using Crafty to improve my sewing skills.
Crafty is an online community for creative makers, with over 2000 classes covering everything from
sewing and knitting to all sorts of crafts and DIY projects. Before this project, I followed
Paul Gallo's 3-hour draping class because it had been a while since I last properly draped anything.
He walks through the process of draping the dress and explains the thinking behind each step,
which is exactly what I needed to do to recreate the Met Museum piece,
especially the bodice part. Even though the example is modern fashion draping,
many of the techniques are transferable to historical clothing.
If you are interested in this class or learning any other new skills,
you can join Crafty using the link in my description.
The first 1000 people watching this video to use my link will get a full year of premium
membership to Crafty for only $1.49, offer valid for new members only.
Given how well the mockup fit, I only made a few tiny adjustments.
Once I was happy with the silhouette, I cut the pieces out of the actual lining fabric,
which is 100% linen. I also cut an opening down the center back and added a few ties
to make it adjustable. I knew this technique was fairly common in the 18th century, but I only saw
an original example in person for the first time at an exhibition in Paris, which I thought was
pretty cool. With the lining finished, I measured out the lengths I wanted for the wattle pleats on
the back. The first time I made a robe a la francaise back in 2020, I was so terrified of
making the mistake that I used paper patterns for absolutely everything, including the wattle
pleats. This time, however, I wanted to do it the Mantua maker's way, which is straping and
pinning the gown directly on the body, without a paper pattern. And this isn't just about
historical accuracy, it's just genuinely a much more efficient way of doing it.
Because of the sheer volume of fabric in the wattle pleats, the center back had to be pieced
together. I spent several hours painstakingly pattern matching the fabric so that the seam
would be almost invisible. I would very soon regret this decision, but at this moment in
time, this poor unsuspecting soul is absolutely delighted with herself. I copied the measurement
of the pleats from Patterns of Fashion 1, marked it out on the fabric, and started pleating.
Oh no, I think I made a mistake. I think I need to redo this whole thing.
So what I belatedly realized was that I was so obsessed with perfectly matching the pattern that
I forgot about an even more important consideration, which is that the very prominent black
stripes on the fabric needs to be symmetrical. Which meant that I couldn't put a center back
seam just anywhere, it needed to run directly through the middle of the stripes. Which
unfortunately meant that I had to take the entire thing apart and start again.
It's approaching midnight, I may have cried a little, but it's okay, we fixed the problem,
the pleats are pleated, so I can come back tomorrow morning to stitch it down.
And welcome to tomorrow. I used prick stitches to secure all the pleats in place,
once that was done, it was time to attach the pleated back onto the lining. I carefully pinned
everything into position, cross stitched it along the center back opening, and basted it along the
side seam. And then came the single most terrifying part of the entire dressmaking process, which is
to cut away all the excess fabric next to the wattle pleats, following along the lining seam
down to the waistline. I think I checked at least 10 times that I was cutting in the correct place
before I finally committed and picked up the scissors. After that, I prick stitched the fashion
fabric to the lining near the center back opening, so that everything would stay smooth and fitted
underneath the pleats. Look at that, she is looking like a thing now! All that excess fabric down the
sides will become the back of the skirt, and to create the front skirt, I cut two additional panels
and attached them to either side of the gown. I also left a 10 inch opening at the top to form
the pocket slits, because historical clothing, they understand priorities. Next came pleating
all of that fabrics onto the waistline of the bodice lining. When doing this, you want to
concentrate most of the pleats at the sides and the back, leaving the front smooth and flat to
show off the trims later. Once I was happy with the pleats, I slip stitched the skirt to the lining
and marked out the hem using safety pins. And then it was time for another fitting to make sure the
pleats were sitting properly and the hem length was where I wanted it to be. I sacrificed yet
another bed sheet to make the hem facing. It's quite narrow at the sides, but becomes very wide
at the center back, where it protects the train from direct contact with the dirty dusty floor.
Next up was the front bodice. I drafted the pattern, cut it out and hand stitched it onto the
lining to cover up all the raw seams. I used a combination of slip stitch and prick stitch here.
It definitely wasn't a quick step, but honestly, hand sewing to me is always such a therapeutic
experience and there's just something so satisfying about seeing all those neat little
stitches holding everything together. Now on to the stomacher. The dress at the mat features a
compact front, which is essentially a false stomacher. This style was especially popular
in the last quarter of the 18th century. It gives the appearance of a traditional separate stomacher,
but it's actually made up of two panels sewn directly onto the gown, which opens down the
center front with buttons. To recreate the fabric covered buttons seen on the original,
I first glued a small piece of linen onto a regular plastic button to add a bit of extra volume.
Then I cut a larger circle from a scrap piece of fashion fabric and wrapped it around the button.
This fabric frays really easily, so I had to add a layer of interfacing and cut the circles
out with scalloped scissors so that it doesn't just completely fall apart the moment I tighten
the thread. Once the fabric was pulled tightly around the button, I stitched through the shank
several times to secure everything in place before sewing the button onto the compact front.
As for the buttonholes, yes, historically they would have been hand sewn, but by this point I
was beginning to run out of time, so I willingly embraced the modern invention of the sewing
machine. I wanted to add the trims onto the stomacher before attaching it to the bodice,
so I decided to put aside the stomacher and insert the sleeves first. That way,
I could do one final fitting before committing to all the trims and decorations.
18th century sleeves are drafted and fitted very differently from modern ones.
There's usually quite a bit of access in the sleeve cap, and the sleeve is pinned and shaped
directly on the body to achieve a custom fit, which is a little difficult when you're your
own mentor maker. So instead, I fitted it directly on my dress form. But as you can probably tell
from the fitting, it did not go well because I had left way too much space in the sleeve cap.
At this point, I also couldn't be bothered to take off my stays,
so here I am altering sleeves in full 18th century underwear. Very scandalous.
It took a couple of fittings to get the sleeve placement right,
but by the end of the day, I could finally secure them properly onto the bodice.
And just like that, we have the basic shape of the robe a la princess.
All that's left now is the fun part, the decorations.
To figure out what kind of trim I wanted, I tested a few different options on the stomacher.
Eventually, I narrowed it down to two, one with a scalloped edge and one with a narrow
trim attached along the edge, which was basically my budget friendly modern substitute for a fly
fringe. I couldn't decide between the two, so naturally, I did what any indecisive person
would do and put up a vote on Instagram. The result was that slightly more people preferred
the added trim option, and that was when I realized, hmm, I think I actually prefer the
other one. So I ran another poll, and this time, the crowd agreed with me,
so I happily followed the democratic process. At some point during the fitting, I got tired of
constantly pinning the stomacher onto the dress, so I ended up assembling it first before stitching
on the final trims. I was really happy with how it turned out, which meant it was time to enter
the next stage of this project, mass production. The assembly line started, of course, with making
a reusable paper pattern. I used it to mark out all the scalloped edges and then cut them with
scalloped scissors. So I guess technically this can be called a double scallop? Unfortunately,
even the double scallop couldn't save the fabric from fraying. It comes apart ridiculously easily,
so I ended up manually pulling out some threads to create an intentionally frayed edge
instead of letting it randomly shed everywhere. This actually created a separation between the
trim and the dress, which I really liked, but the downside was that I was absolutely covered
in tiny silk threads. Maybe wearing all black wasn't the best idea. Next, I gathered the trim
with a simple running stitch. After testing a few versions, I settled on a gathering ratio of 2 to 1.
The trim pretty much runs the entire length of the dress, from the back over the shoulders
and down the front opening. In total, I needed around 7 meters of finished trim, which means I
had to prepare about 14 meters of fabric. And yes, it took forever. I then pressed the trim with an
iron to create a slightly crushed effect. This isn't really a necessary step, it was just a
personal preference because I like the texture it gives. The original museum dress has two trims
intertwined together. I started with the wider one, which I guesstimated to be about 2 inches
wide at the top, gradually widening to around 4 inches at the bottom. I pinned everything in
place carefully, making sure both sides were symmetrical. Then, I threaded in the narrower
trim, which was about 1 inch wide. I designed it so that it follows the pink wavy pattern in the
fabric. It's such a small detail that probably nobody would ever notice, but I will and I know
that I will still be very happy about this in 10 years time. At this point, I had completely lost
track of how many hours I had spent on these trims and the fabrics were starting to blur in front of
my eyes. But guess what I decided to do next? More trims! So far, I had been using the bedsheets
mockup as a temporary petticoat because I wasn't sure whether I had enough fabric left to make the
entire thing out of the fashion fabric. After finishing the gown, I realised that I actually
did have enough, so I cut out the front and back panels, each using the full width of the fabric,
and proceeded to make even more trims for the petticoat. Again, I mostly copied the arrangement
from the museum piece, with only a few changes of my own. Once all the trims were stitched down,
I joined the front and back pieces together, again leaving around 10 inches opening on each
side for the pocket slit. The front and back of the petticoat are both pleated at the waist.
The front is knife pleated from the centre towards the side seams, while the back pleats from the
sides towards the centre. To create the waistband, I measured out the width on a piece of cotton twill
tape and then honestly just eyeballed the pleats. I slip stitched them down, folded the tape over to
the inside, pinned each pleat individually and stitched the bottom edge in place. There are many
ways to finish a waistband, but I chose this method because I felt like the pleats would be
more secure with two rows of stitching. With the petticoat finished, the only thing left was the
sleeve decorations. I drafted the sleeve flounce pattern based on Patterns of Fashion 1 and the
museum image. Like the other trims, they have a scalloped edge cut with scalloped scissors,
and were gathered to fit around the sleeves. For the engagements, which are the detachable
false sleeves worn underneath the sleeve flounces, I used this vintage lace that I had originally
gathered and prepared for an 1830s dress a few years ago. I never ended up using it for that
project, so I was very happy that this beautiful lace finally got a purpose. I trimmed it so that
it was narrower at the front and longer at the back, and layered two pieces together and cross
stitched them onto the sleeves. I attached them quite loosely on purpose so that they could easily
be removed for washing or swapped onto another gown. And now, behold, the finished dress.
This robe à la Française took me around 140 hours over the course of two months. I wanted to make
something truly glamorous, something that felt worthy of a visit to the 18th century French
court, and I'd like to think that I've achieved that goal. So, without further ado, let's go to
Versailles.
