How to make a Poof deco mesh wreath with ruffles

Hard Working Mom
119 followers
Oct 25, 2024
[Music]
hi Lori from hardworking mom today I
wanted to show you how to make pretty
much the normal regular deco mesh wreath
I actually have an order that someone
wants me to make for a friend of theirs
that's getting married and they're they
really like this cobalt blue so I'm
going to um do a wreath with the White
and the cobalt blue and I thought it
would be a fun thing to do a tutorial on
so what you would need for this would
just be one 20 in 21 in Roll of the deco
mesh and a work wreath I have the cobalt
blue tinsil Ties on this
one so let's get
started so this is just going to be the
regular poop method for making a deco
mesh wreath and I actually got this Deco
MH at Walmart they do have some cute
colors over there is limited but they
had the perfect color of the cobalt blue
so the first thing I'm going to do is
I'm going to take
my work wreath and I'm going to go
around and make sure
see there's something sticking out
nothing is sticking out that would
damage a
door and if there is I'm just going to
kind of bend it
back
okay and then I'm just going to go ahead
and open up all these
ties just makes it a little faster when
you're going
through okay so now that we've got that
done what we're going to do is we're
going to take this deco
mesh and I like to with this kind I like
to start on the inner
layer of course this is personal
preference you can either start on the
outer layer which is the bottom or the
inner layer which is the top and I'm
going to be using a little zip
tie just to make sure that my deco mesh
is not going to come off
later
so first thing I'm going to
do is get to the very beginning and I'm
just going to pull it
together like
this see
that okay figure out where I want to
start so I'm going to
start right here and I'm going to take
my little
tie and I'm just going to tie
in this very first
part you're not going to be able to see
this when you come back around
so and then after I get the wreath done
I'll come back and trim that so I just
kind of push it down to the
bottom
okay
so there are several ways that you can
do this you can measure
it you know go out here to your
little
measurement and do like a
tin you can
also now I'm going to do this on this
side so you can
see what I like to
do is I just take it put my hand down
here at the bottom and I come up about
three like that then I just fluff it out
make sure that's about what I
want and then I tie it down
you know and as you play with it you'll
figure out about what you want your
Loops to look like you don't want them
too big and you don't want them too
small so I'll just come One Two
Three fluff it out make sure it looks
about the
same and tie it down it's just a much
faster way
way instead of measuring out each
Loop I'll just keep doing that same
thing one two
three WIP it
out
that and tie down
now I'm only twisting these really one
time because we're going to come back
and I'm going to put in some Ruffles and
I'm going to put in some ribbon so I'm
going to go ahead and finish the top
layer and then as soon as I'm done with
that I'll show you how to start on the
bottom
layer okay so I've gotten back to where
I started and I had put my zip tie right
there where this tie is I didn't use the
tie and I kind of left the tie open so
that when I get to my last one I can use
that tie and it just makes
it seamless and you can't really tell
where it starts and where it
stops so I'll just put that down in that
tie and
TI
off
okay so now that I've gotten all the way
around I want to go on to my second
layer and there's a couple ways that you
can do this you can cut it start over
using
another one of your little
ties but what I like to do is I will
actually pull this down
to the next
row and I will just try to get as close
as I can to this
tie and I will just use my zip
tie
here and I will just tie it down to that
work wreath like that push that behind
and I will come back
and get that going
later okay and then I'll just start
over like that
so I'll do the same
thing make my poof
tie it
in and you're not going to be able to
see this when you come back
around so then I'll just continue on
with the bottom same way I did with the
top just count out my
three poop it
up and tie it down
just
that okay so now that we've gotten this
all done I want to start cutting my
Ruffles and I will show you how I'm
going to do that so since this is the
White and the Cobalt I have both white
deco mesh and the Cobalt deco mesh so
I'm going to use both of those to do the
ruffle and what I'm going to do
is roll these out
together just so it's a little bit
faster to cut them at the same
time and I often like to use ribon or
something to hold that cuz otherwise
they'll keep
unraveling so what I'm going to do is
I'm going to measure to 10 in and cut
there and then I'm going to
go do 20
so that gives me
four which is just two rows since I want
to do them
together and I'll cut out some
more
10 20
okay I'm going to cut one more
time to get one more 10
in
okay so I'll have to cut out a bunch
more than this but I want to at least
show you what I'm going to do with
this so we'll just pretend like for
right now that I have all of these cut
out which I will go back and do later
but what I'm going to do is I'm going to
separate them and I want to lay it down
flat but I want to do it where it has a
tendency to
roll so I'm going to lay it down flat
like this and I'm going to go up through
the
middle just like
that I'm going to make a little bow tie
then I know I'm going to put these two
together so I'm just going to put this
in between my fingers just to hold it
then I'm going to take the next piece
I'm going to do the same
thing just going to go right up through
the
middle make my little bow
tie like
that I want the white to be on
top so I'm going to put them like
this the white then the blue together
I'm going to going to open my tie back
up put these
in just like
that and tie it back
down then I
have two more splashes of that color and
it will help me cover up any spots I
have in the wreath where there you can
see the
wire see that we'll do that one more
time
so I'm going to separate
them put it
down just like
that go up through the
middle like
that hold
it do the next one
there put them
together open up my
tie put them down in there and tie it
back
and I just kind of go through and fluff
it a little
bit like that so I will continue cutting
and going around and adding these in and
then once I get done with that I'll come
back and show you what we're going to do
next okay so I have gotten all the
Ruffles put in and as you can see it
really makes the wreath a lot Fuller
and very
pretty so I have lots of ribbon that I
want to put in and since the the main
color is this cobalt blue and it's for a
wedding I found some cute little
ribbons um this one looks like little
bows I thought that was cute and then of
course I have sparkle can't be without
Sparkle and then more of the Cobalt
so what I'm going to do I already have
some cut but I want to show you how
I so I want to show you how I make all
of my cuts for my ribbon
quickly so I make all of my ribbon 12 in
and so I cut a piece of cardboard half
that width and then covered it in duct
tape just to keep keep it strong I
notched out a corner so that I know what
the top is and then when I get ready to
do my ribbon I just put it at the top
and just fold it
over like
this however many ribbons I think I'm
going to
need once I get to the
top I just cut
it and then slip my scissors in
here cut
again and just that quickly I have four
ribbons cut I like to do the little
doveet tail so
I fold it over and cut at an angle just
gives it that nice little finished
look same thing on the other
side and just that quickly I have four
four ribbons already to put on my
wreath there's lots of different ways
you can do your Ribbon but I just find
that this is very quick of course it is
highly inexpensive because all you need
is
cardboard and it does save a great deal
of time seen other people use those
ribbon gadgets where they put the spools
on and then they pull it out and cut it
and I think that's great but I just
think that this method is certainly a
lot less expensive it's really easy to
do and it's fast so you just can't beat
it so once I get all my ribbon cut out
that I want we're just going to start
adding it
in now I like to put you know two
different colors together or two
different ribbons together I should say
way just open
my ties back up add it in and for this
one I'm just going to do just a simple
pull to have it stand
up then we'll just go around and add
ribbon
in now you can take your ribbon and
spread the ribbon
apart just to give it more
interest like
that that's
pretty I do like to vary the
background just because it gives it a
lot more
interest so I'll just keep going
around and get all my ribbon put in
and then I'll be back to show you what
it looks like in just a
minute okay so I've gotten all the
ribbons placed
in you see how full this
is with the
ribbon and the
Ruffles I think it turned out really
great so since this is a wedding I'm not
really going to add a lot of
of picks or embellishments to it I'm
just going to add in a sign in the
middle that says Mr and Ms and then
that'll be
it so I hope you enjoyed
this I hope that you are able to make a
wreath of your own like this if you have
any questions please leave comments and
give it a like And
subscribe and I'll see you for the next
tutorial have a great one bye-bye
[Music]
