How to make a Holiday Centerpiece for your table with deco mesh

Hard Working Mom
119 followers
1 Video View·Oct 26, 2024
[Music]
hi Laurey here today we're going to be
doing a Christmas centerpiece so I love
to do these centerpieces on those rails
and that's what we're gonna be doing
today so let's get started
okay so we're going to be using this
this is a rail this is a 22 inch rail
now I got this one from Caroline pottery
but you can get this at trendy tree and
you can also get it from craft outlet
and the riche op they all carry it it's
just a basic little rail it has four
little places so what we're going to do
and it has eight ties on it so I'm going
to be using this and the smaller version
of it and what I'm going to do is I am
going to make I'm going to start it off
doing the proof method okay
so I will I'm not going to start it like
I started normal poof because I wanted
to whoops
have some tails so I will take about 10
inches and I will scrunch it up like
this and then I will go to the very
first row and I'm actually going to zip
tie this on okay right at the end
okay
I'm gonna do the same thing on the other
side so they'll actually be two of these
on one on the side and one on this side
okay so once I get that done I'm going
to make a poof so I'm gonna make about a
10-inch poof and I'm gonna put it in
this very first tie I'm gonna tie it one
time
there we go and then I'm gonna do
another 10-inch and I'm going to take a
pipe cleaner and I'm gonna tie it in
between the first time the second tie
and I'm gonna scoot it over a little bit
then I'm going to do another one now I'm
not measuring just because I pretty much
know but you can measure it out ten
inches or you can just push it up
against the one before it and tell if
it's about the right size so I'm going
to actually put four in each row so I
did another one with the tie and then
this last one I will put in the tie
that's already here okay there we go
like that and I'll get started on the
next side so I'll be needing plenty of
these
okay so I'll tie this one on and I am
tying it from the bottom so that I have
the little ties coming up so that when I
want to go in and put ornaments and
ribbon and such I have something to
tighten so I'm just going to do the same
thing push it back a little bit
so I want to put four in each section
you
so I'm just about done with this side
and I will do the other side off-camera
so you don't have to watch the whole
thing but I wanted you to see one side
okay
[Music]
I guess and we're down to this tie
ten then I will just measure out ten
inches cut this out
here we go so now we have one half done
so I'm going to go off and do the other
side
but I'm going to do the exact same
process and what it's going to do is
it's going to push this down a little
bit it's gonna be really cute so I'll be
right back okay so I've gotten the
second side done now on the second side
some only have three and it's just
because that's all the besh I had so
I've gotten all this put together and
that cute so now what we're going to do
is we're going to use this small one all
right now what I'm going to do is I'm
going to cut it into ten inch links and
make bundles of curls so I'm just going
ahead and cutting up some of my pipe
cleaners I'm just cutting them in half
because I don't really need a whole one
so what I'm gonna do is take my roll
roll it down on my mat and use my rotary
cutter and I'm just gonna cut it every
ten inches
[Music]
there we go all right now what I'm gonna
do and you have two options with this
you can just do the curls and not put
any ribbon in it and I think that's what
I'm gonna do but you could do the curls
and put some ribbon in it and then put
it in your centerpiece so what I'm gonna
do is the way that it likes to curl you
see I just put it upside down and then I
just curl it from the middle and just
make it into a curl
now there's two options here actually
there's several options you can hold it
them between your fingers and do the
next one
like this
and do that until you get three of them
or you can put it in your phone Abra
this is a great option if you have
trouble with your hands or you just
don't feel like holding it like that you
can also use a chip clip you can use a
clothes pin any of those options work
great so then what I'll do is I will
take the three and I will put my pipe
cleaner around it like this and then I'm
going to push it up and the reason I do
that is because it allows me to get it
as tight as possible and it helps to
keep these pushing up alright so I'm
going to show you that one more time so
take this roll it from the center okay
another one just roll it from the center
and it doesn't have to be real tight you
just want a good curl
like that then take your pipe cleaner
put it around your mesh pull it up like
this and then tighten your pack leader
now I'm gonna make let's see there are
four bars and I want to put maybe three
in each so I'm going to need 12 of these
bundles so I'm gonna go and make these
12 bundles and then when I come back
we'll put them in so I'll be back
shortly
okay so I've gotten a ton of these done
so I'm just going to start putting them
in and what I'm going to do is I'm going
to take this I'm going to move this mesh
aside and I'm going to tie it right now
to these cross bars just like this
okay
and that second I'll turn it around show
you what it looks like from the back
and I want to tithe it so that they're
going back and forth this way because I
want it to be enough to cover the center
okay
you know turn it around show you okay so
all I did was take it down here to the
crossbar and just tie it off and it's
that simple so I will tie the rest of
these on and then we'll start decorating
all righty now we've got them all in now
just kind of go through and block them
up make sure everything is standing up
okay
there we go now it's the fun part I have
all kinds of things that we can put in
here I have some really pretty ribbons
see these I've got how go home I have
some Merry Christmas I also have a fun
cute little things to put in it
yeah I have this little people L he's so
cute I have this elf you can sit in here
I love that I'm gonna be doing some of
this it's gonna be a busy one I have
some of this
I have little hats curly have all kinds
of ornaments okay well Christmas
presents I have a little snowman she's
kind of snowman's is cute so these are
all the different kind of things that
you can get to do your centerpiece now
what I'm gonna do
[Music]
okay so what we're going to do is just
slightly different I'm going to make
little tiny bows to go in these about
four inches not going to be any tails on
them there's just going to be one no
Bella okay so what does I get one of
these done it's just a two loop little
bow I will find my wire here we go
I'm just gonna put a little bit of wire
around it just to keep it okay because
I'm really gonna tie it down in this tie
that's on here but I like to do this
just to make sure it's not going to come
loose so I'll just put some wire on it
put it off and then I'm going to take
this and I'm going to put it right down
inside this tie and then
I'm gonna find a little ornament that I
like and I'm gonna put it right in the
center just like that now you can do
small ones okay so you can do small ones
or you can do really large ones like
this I love those colors you can also do
medium-sized now I have all kinds of
different warning bits that I can use I
like that one and that one this one bank
so I can do this which I think that's
kind of a perfect size I can still put
some of these in here okay so what I
will do with the ornament is I will
actually glue that down I want to show
you some other options these are cute
which we're going to actually put these
up like this but you could also put that
in there so okay the other thing we can
do is take some of this flips to be this
cute so what I'll do is take about a
yard of this okay and I will make a
little bow with that - I'm gonna make a
two loop bow four loop bow I guess you
would say
what is really curling okay there we go
there we go all right so I will do the
same thing I will take just a tiny bit
of wire and put it around here and tie
it off it just makes it slightly easier
when you put it down so I'll open this
back up oops
then I'll put this down and then tie it
back off again I'm going to tie it a
good couple two or three times that
little side wants to come up that's okay
we'll fix it when we let me glue this
down okay so now you can stick with one
tight so you could do all of them with
like something like this you know you
can do this this will stand out this
will stand out even the red with the
white will stand out this screen will
stand out so I might do one with this
green so just make our little bow just a
little too loop bow that tiny little bit
of wire around it
okay
go into our next tie tie this down
left that up all right and then a little
bit more of our tubing on there
now I'm doing is making little loops
with this - same thing okay use a tiny
bit more wire tie this together
okay
I'm gonna put these whoops
put these together tie it down then I'll
come on this up spread these out
okay so we've got I can put a red here
and a green here that's keep alright now
let's do one of these so same thing just
make one loop two loops
trim this off wire tie this down
okay
alright now this time I'm going to use
this flex TV and that cute it's like a
little red and white so we'll get a yard
okay
make our little loops
never get now we can put just a tad of
wire around this
okay
tie these little ends in here so those
are the ones that I always want to pop
out here we go now we'll just take this
and this together go to our next tie and
tie these down and I am trying to get a
good three times once I get this down
that's cute
okay and we will put a little ornament
on that too cute okay so I think what
I'm going to do is I'm going to
alternate these between the red and the
white and the red and the green that way
to give it a more uniform look all right
so I'll do this bow okay okay
here we go I will get a yard of this
okay and then make my little loops on
here
right back ok a little bit more wire
just tie it around here right now I'll
have one side done so I'm not going to
make you watch me do the other side but
I'm gonna do the same thing on the other
side although when I get to the other
side I will start with the red and white
here just to alternate it a little bit
let's see if then put that down
this
tie it down to three good times do this
side make you watch it the other side
cuz I'm gonna do the same thing the only
difference is I will I will start with
red and white up here alright so let's
see I'm gonna switch this out with the
green and move this one over okay so
I'll just move it to this one
okay
laugh it up yeah yeah put my green one
down okay
and up my bed
okay all right then I'm gonna take this
hot glue gun and I'm gonna take my
ornaments and I will run a good medical
you on them and then stick them right in
the middle of this little bunch do this
one
I don't want these to come off green one
okay man yeah we can
all right I think that's so cute
see they're round they're pretty good
well I said that the little piece came
loose from its little holder these are
good okay so I will go and do the other
side and then when I come back we're
going to work on putting some stuff in
the center so I'll be back
okay so I've gotten all the little
pieces on the side in so now what I want
to do is work on putting some things in
the center so the main thing I want to
use is this little piece here okay it
has all these cute little things in it
and so I'm going to take these and
separate them I want to get as long as I
can I will just pull these apart okay
this one I'll just twist up all right so
I'm gonna put Santa in the center
Santa's helper in the center so I'll
just move my things aside put this down
I'm gonna put everything down and then
once I'm sure I like the placement when
I'm sure I like the placement then I
will tie it down okay so this little
feet there
I'm gonna put this little head over here
okay I got some of this
[Music]
okay
I think that's cute I have these nice
big ornaments and so what I will do with
these as I will take some of my wire or
you can use a pipe cleaner - that might
be better yep
I'm just gonna run it through that hole
I'll twist it one time and then I'm
gonna put it down I want to put it near
where there's a bar I'll tie it right
down to the bar right here I don't want
to tie it too tight because I want to
make sure it has enough room to come up
so you can see it okay
all right there's one watch how to get
it on the other side so I'll do the same
thing I'll just put it right through
this little thing that you can use to
hang them and I will put it
on this side and I will do the same
thing so I will move it down and tie it
different there we go
all right I have a couple just plain
green ones
nice big green ones and I will put those
at the opposite of the red and green
these are so cute aren't they
Thanks so I'll take a couple more pipe
cleaners run it right through this stink
hole okay I'll put one over here just
move it aside on the base
it is tactic
so I'm just feeling underneath it to get
the base and you tie it down to the base
let's see it's right here yeah I'll just
tie it off okay okay here we go okay
all right and then we'll put one over
here
so again just run it through the hole
hole twist it
here right down to the base
and there we go
cute okay so I'm pretty good with these
so I'm gonna go ahead and tie these down
let's see if I can yeah there's a base
right here there's a crossbar right here
so I'm just gonna twist it then this is
wired so I'm just going to twist the
wire around the base okay let's see this
one I'm gonna tie to this base here so
they don't know this
okay then I'm just twisting this wire
around the frame just like I did the
other one and that will hold it in place
there we go all right and then this
little guy ah there is a crossbar right
here so I'm going to tie him down all
right then I just want a wreath left my
little curls here is I'm moving them
around while I'm getting to all these
things there we go all right okay it's
adorable now
I really like this kind of sticking up
so I'm definitely going to tie this one
down it's right in there the end
crossbar so I'm just going to tie it
right on there okay same thing here I'm
gonna move this with a little bit more
in the center and then I'm gonna tie it
down to the crossbar I'm just twisting
it around little bar the same place we
put our curls okay we can add now of
course you'll have to go back and kind
of reflex once you get some stuff in we
have this this is really cute
these are fun so these are just like
little curly keys and the best thing
about these is that you can make them
longer or make them shorter so what I do
is I just pull some off just put them
down right in there the bar and just tie
it in and then if I think it is not long
enough I can pull it up and if I think
it's too long I can shorten it like that
okay
now these excuse me Jim I think I'm
gonna save this for another project
because I think the green is a little
bit not quite right to this I'll take
another one of these okay now I'm gonna
put this over here I'm gonna tie it to
the bar
I'm just kind of moving the mesh aside
so that I can get to it and then just
wrap it around because it has this nice
wire in it there we go okay reshape it a
little bit there we go all right
I like it okay here it is on my table
you
and that's it so I hope you enjoyed this
you'll have to let me know what you
thought and thanks for watching I'll see
you again soon bye bye
[Music]
