How to make a summer curly deco mesh wreath

Hard Working Mom
119 followers
Oct 26, 2024
Lori here. I have another video I want to bring you
on a wreath that is one of my very favorites.
I love to make the curly deco mesh wreaths
and it's almost summer so I wanted to make
a summer one and what I did is I picked out
a ribbon and this is the ribbon I want to do. It's a cute little ribbon. It has
little flip-flops on it and then I went and picked
some deco mesh that matched it. See I have the blue, the yellow, the pink
and the green. So I'm going to make
my wreath with four different deco mesh colors.
These are all 10 inch deco mesh. None of them are foiled. They're just
regular deco mesh with the sparkle. So what I'm going to do
is I am going to cut them all together because I have my wonderful mat
that is the self-healing. I got this one from Walmart.
It is such a convenience and it really does
make things so much faster because with this
I can cut all at the same time. So I will just roll them all out together
like this. Pick up the one that dropped.
Roll it all out.
And then the great thing about my mat and I'm going to cut this one off.
The great thing about my mat is I can cut them all together.
I can measure it at the same time. I will just let them drop off just like
this. Then I can just pull them up as I need
them. Okay so like always I like to
make a fresh cut. Just makes it a lot easier to measure and I am going to cut
about 11 inches. Then I'll do it again at 22
and again at 33. So that's the great thing about this mat.
You can make three cuts and it just makes it go so much faster.
So I will keep cutting these and as soon as I get them all cut
I'll come back and we'll start putting it together.
Okay so I've gotten all of the deco mesh cut out
and I am going to be using a 16 inch wire frame. Then the next thing I'm
going to do and I just thought I'd show you real
quick. I have all kinds of different little
cute little embellishments to put on the wreath once we get it made.
So I'll put these away until we get to that point.
But I showed you earlier this is the ribbon that inspired these colors in
this wreath. So the next step is to cut some ribbon.
Now you can do this wreath two different ways.
You can make you're going to make bundles with these and you can make
bundles. Put them on your wreath and then put
ribbon in. But I just find it a lot easier if you
put it all together at one time and then when you put it on
your wire wreath you're done. All you have to do is add in your embellishments.
So what I'm going to do is I'm going to cut some ribbon.
And what I did is I got this ribbon and then I found
some ribbon that matched those colors. So I have pink and green,
green and blue. I have this pretty that has the yellow, the orange, the green,
and the pink and then pink and yellow. So I like to
put you know different ribbons together just
gives a lot more interest. So I'm going to cut some of these
and then we will work on putting the bundles together.
Okay so I like to use this little tool I made.
This is just cardboard that's cut at six inches.
I like my ribbons to be 12 inches which is why I cut these at 11.
Because I do want my ribbon to stick up a little bit.
And so I cut this cardboard six inches. I put some
duct tape on it just to keep it stronger. I notched the corner so I always know
what the top is because sometimes I won't be paying attention and then I
can't remember where the top is. So what you do is you just wrap it
around your cardboard like this.
It just makes cutting a lot faster. Just like that. Then I'll cut it up top
and then slide my scissors in here and cut it just like that. So that
quickly I cut four. It is a big time saver
because when you're making wreaths and you're having to cut ribbon
it can be time consuming. So this really cuts down on the time.
Then I like to fold it over and cut at an angle
and make that nice little dovetail. So we'll cut a few of these others
and then I'll show you how to make a bundle. I really like the colors
in this wreath. It's going to be a fun summery wreath.
So I just do the same thing. Start at the top.
Slip it around just like that. There we go. Do my little dovetail.
Sorry about that. Okay.
Put it again at the other side like that. Then see when you put these
together. That's just so cute because when you
fold it and it pops up you'll get to see both
ribbons. So that's why I like to put the two together.
I'll cut one more and then I'll show you how to start making bundles.
Here we go. Okay. We'll cut that edge. Cut this edge.
Okay. So now we will work on doing some bundles.
These do tend to stick to each other. Pull this out. Okay. So what you're going
to need to make the bundles is pipe cleaners. So I have pipe
cleaners in all the different colors that I have in the deco mesh.
And what you do. I'll move these out of the way a little bit.
You're going to take one of your four and you're going to have to separate
them. Just like that.
And you're going to take each one and you're going to go.
You see how it tends to roll like that? So that's what you that's what
you want to do. You just want to put your hands in there
and just roll it up. It's good to roll it from the end
because that's where you want it to be tightest.
And there's a couple things you can do. You can bend it in the middle.
Hold it in between your fingers. You can use a chip clip.
Sometimes I do this. Just hold it like that.
You can use clothes pins. So I'll just take the next one
and I'll just roll it up just like this. And if you have a piece that sticks out
like that. That does happen. You can just kind of
maneuver it back down in there. Like that. So I'm going to hold these in
my finger just because I find that easier.
Okay. I'm going to roll up my next one. Same thing from the end.
Just like that. Pinch it. Put it in my pile. Okay. Last one.
So I will roll it up from the end.
Like that. It doesn't have to be real tight.
There. See I have all together. And then what I'm going to do is I'm
going to take two ribbons. Put them together
like this. I'm going to pinch them in the middle. I'm going to lay it
right on top. And then I'm going to get a pipe cleaner.
I tend to try to like use the pipe cleaners that are the same
in the ribbon. It just helps hide it. Although
when you get this on you're really not going to see the pipe cleaners because
it's really going to be standing up. So you pull it in the back and just
twist it. You want to twist it about three or four
times. It's real good. You see that makes a
bundle. See how cute that is? Okay.
So you're going to make bundles with all of these
cuts that you made. You're just going to keep doing the same thing.
I'll show you again. You know and I don't worry about
which way I have. I don't care if I have pink on the bottom or blue on the
bottom or green on the bottom. I don't think that
makes a difference. It actually gives it a little bit more interest if you kind
of vary that a little bit. So I try not to go in the exact same
pattern. I just find that it's a lot more
interesting and fun if you varied a little bit.
It brings out a lot more colors too. So just keep doing the same thing.
Just roll it. Hold it in your hand and do another one just like that.
One more. Okay. So you see I have different colors on the
bottom than I did on the last one. So I have pink
on top and I know I want to use my pink
ribbon this time and I'll use it with the
green. So I will use a pink pipe cleaner. I'll just set this down right on top.
Pull my pipe cleaner around. Pull it tight.
Really tight and then twist it. If you just twist it like this it makes it
really nice and tight like that. See? Now we have two bundles
just like that. So what I'm going to do is I'm going to go ahead and make all
these bundles and then when I come back I will show you
how to put these on the wreath. Okay. So as you can see
I have tons of bundles of our cute little deco mesh with the
ribbons that we're going to put on this wreath form. So what you're going to
do is you're going to take your wreath form
and you're going to take your bundle. You take the tie and I like to put it
right in the middle. So I put it in between
the second and the third one. You just pull it back
like this and then tie it off. Now I'll come back later and
snip these off and hide them underneath but for now I'm just going to keep
going. So I'll do the same thing. I'll just put it
right in the middle. Pull it over like this and tie it off.
That depends on what size you use and how much
ribbon and such you have but generally speaking
you can usually get between four and six in each one of these little sections. So
you just want to keep going around putting in
your bundles. Let me move these so I can make sure you can see. So
you just put it through the two in the back,
tie it off and you want to make sure that your ribbon is standing up like
this because you want to be able to see it.
So as you're putting them in just make sure that ribbon is
pushing up like that. Okay so we'll just keep going and as you can see what I do
is I will pick up with different ribbons. I don't want
there to be too many that look just alike back to back. It just
kind of gives it a little bit more interest in depth. So I'll do that.
Push it over and as you go around and it gets fuller
it could be that you can't get as many in these sections and that's okay
because you are not going to be able to tell when you get done
that you had more in some and less in others.
So that's the great thing about this wreath and the fact that it's very full.
So I just twisted it in the back just like that.
You can take these two and twist those together
just to give it a little bit more strength.
So I now have five in there and since we're at the beginning I think
I can get one more in there. So I'm going to go ahead and put
a sixth one in there and then I'll go on to the next section.
So I just pull it up in the back, twist it. I can twist it with the next
one. Just like that. Okay.
So see in the back you can see how there's kind of a separation
but in the front you're not going to see that
because it's going to be nice and full and your ribbons are going to hide
certain things and so are the curls. So don't worry
if it looks a little bit different from the back. So I'm going to keep going
with all of these sections around and then when I come back we'll start
putting some cute embellishments on it and I'll
be back in just a few minutes. Okay so I'm done.
I've gotten everything put in. See how nice and full that is.
So I ended up using 36 bundles in total and that's four
deco mesh 10 inch rolls. Blue, green, yellow, and pink. I ended up using
about 72 ribbons. 12 inches each
and see how full it turned out. So I've gone through and kind of fluffed up
some of my ribbon a little bit like that and then I'll start adding
some cute embellishments. So now I'm going to start adding
some cute little things I got. I thought that was really cute so
I want to kind of put this in the middle. What I like to do
when I'm working on my wreaths is I will put everything where I think I want it
to go and I will check and make sure that it
looks like I want it to look and then I will wire it down and use my hot glue.
So I'll just go through and start adding some things in.
So let's see. I'll just kind of set them in here
and then when I'm ready I'll go back and I will
make sure that they're in there tightly.
I love these kind of things so you can just kind of pull them apart.
Kind of tough. Better yet let's cut it. Okay so what's great about these is
that you can pull them out just like that so that they will stand
out when you put them in. See like that.
I have green as well so I'll cut a couple of those off.
Now put these in. I don't know if I like that.
Take that off for now. Okay and so what I'll do when I figure out
exactly where I want it to go is I will take a little bit of florist wire
and I will actually wire these to the frame
and then I'll put just a little tiny drop of hot glue on it just to make sure
it's going to stay where I want it to stay.
So I'll just keep adding some things in. Let's see.
I have a cute little butterfly right up there. Then I have these cute
little balls. I just thought they were so adorable.
I have it in the hot pink and in the blue.
So I'll just add these in. We'll see if they stand out enough. I
think they do. Let's see. It's like they'll just
be a pop of color you'll see. Like that. I also have these cute little
flip-flops and I'll put them maybe right here.
I have another butterfly. This one already has a wire on it.
So I'll put this down here like that. Okay. Maybe one more little
curly cube there. I also have some cute little bees.
So I'll just kind of pull this out. Cut it off. Okay.
See it's so cute with those little wings. I'll put that up here somewhere.
Okay. So see how cute that looks? So this wreath is really so full. I tend
not to put a ton of things on these wreaths
just because they are so full. But I hope you enjoyed this and comment
and give it a like and let me know any projects that you're
trying or anything that you want me to show you how to make.
And I hope you enjoyed this and I will see you next time.
Bye-bye.
