Lecture 56: Plane motion of a rigid body: impulse-momentum equation

IIT Roorkee July 201
61 followers
2 Video ViewsยทOct 3, 2024
In this lecture, we discuss the impulse-momentum relation for the rigid body and cover a few related examples.
Hello everyone.
Welcome to the lecture again.
In the last lecture, we looked at the work energy equation of a rigid body performing
a plane motion.
Today, we are going to look at the impulse momentum equation.
So, we already know that for a particle, the impulse momentum equation is initial momentum
p1 plus t1 to t2 fdt, which is the impulse equal to the final momentum.
Now, we also know that the angular momentum of a rigid body is defined as the moment of
linear momentum.
So, it is denoted by either H or L. I will prefer L that is equal to r cross p, where
p is the linear momentum.
Now, we also know that rate of change of angular momentum dl by dt that is equal to moment
or tau.
So, this I can rewrite as summation mg.
This is about the mass center equal to L dot, where dot represents the rate of change of
that quantity.
So, here this G represents mass center and also the angular momentum about the mass center
is I bar omega, where I bar is the moment of inertia of the rigid body about the center
of mass.
Let us call this as equation number 1.
Then similar to the impulse momentum equation for the particle, we have the impulse momentum
equation for the rigid body and it is given by Lg initial plus t1 to t2 summation mg dt
equal to Lg2.
Here Lg1 is the initial angular momentum of the rigid body about the mass center.
Here integral t1 to t2 mg dt is the external angular impulse and Lg2 is the final angular
momentum again about G.
So, this equation tells us that the initial angular momentum about the mass center G plus
the external angular impulse about again G equals to the final angular momentum about
G.
Now, let us say we want to calculate the angular momentum of a rigid body about any point which
may be or may not be on the rigid body.
So, angular momentum about any point.
So, let us say we have a rigid body and this rigid body has a linear velocity of V.
So, therefore, let us say the momentum that is acting on the body is P equal to mv and
let us say this body is also rotating with an angular velocity omega.
Therefore, the angular momentum about G will be Lg equal to I bar omega where I bar is
the moment of inertia of the rigid body about the mass center G.
Let us say I want to calculate the angular momentum about a point O which is at a distance
of d from the line of action of P.
Then the angular momentum about O will be the angular momentum about G plus the moment
of momentum.
The moment is mv and its momentum is you have to multiply by the perpendicular distance
which is d.
So, therefore, Lo will be Lg is I bar omega plus mv d.
So, you have to note that here this O may be a fixed point or a moving point which may
be on or off the body.
So, this point may be on the body as you have seen or it may be off the body.
Now let us say this body rotates about a fixed point.
So, if the body rotates about a fixed point, so again we have this rigid body, let us fix
some point on it.
So, let us say this body is rotating about this fixed point.
So, we have the linear momentum P equal to mv bar and since this body is rotating with
an angular velocity omega, therefore, this has angular acceleration Lg equal to I bar
omega and let us say the perpendicular distance is r of the mass center G and let us say this
point is O.
So, therefore, the angular momentum Lo will be I bar omega which is the angular momentum
about the mass center G plus the moment of momentum.
So, we have mv bar multiplied by the distance which is r.
Now we know that because this is a fixed axis rotation, so therefore, V equal to r omega.
So, therefore, Lo will be I bar omega plus V is equal to r omega.
So, we have m r r omega, so m r square into omega or omega is common.
So, I can take I bar plus m r square into omega.
Now note that what is I bar plus m r square?
I bar plus m r square is the moment of inertia of the rigid body about O.
So, you can use the parallel axis theorem.
Therefore, I can write down Lo equal to Io into omega and we have summation mo equal
to Lo dot.
Therefore, the moment impulse equation becomes for point O, it is the initial angular momentum
about point O plus t 1 to t 2 summation mo dt which is the external angular impulse equal
to Lo 2.
So, this is the equation of impulse momentum about the point O.
Now, based on this, let us look at some problems and the first problem statement is following.
The mass center G of the slender bar of mass 0.8 kg and length 0.4 meter is falling vertically
with a velocity v equal to 2 meter per second at the instant depicted.
Calculate the angular momentum Lo of the bar about point O, if the angular velocity of
the bar is 10 radian per second in the clockwise direction.
So, we have this rod and it is falling with a velocity v equal to 2 meter per second and
it has initial angular velocity omega equal to 10 radian per second.
Its mass m is 0.8 kg and the length is 0.4 meter and we have to calculate its angular
momentum about point O and point O is at a distance of 0.3 meter from the line of action
of v.
The angular momentum about O will be the angular momentum about G plus the moment of momentum
and the moment is mv and you have to multiply by the perpendicular distance which is 0.3.
Now, Lg will be I bar omega plus m is 0.8, velocity is 2 meter per second multiplied by 0.3.
Now, I bar is the moment of inertia of the rod about its center of mass and we know that it
is m L square divided by 12 into omega plus 0.48.
So, let us put the value mass is 0.8, length is 0.4 into 0.4 multiplied by 10 which is omega
divided by 12 plus 0.48.
So, this comes out to be 0.1067 plus 0.48 and this is equal to 0.587 kg meter square per second.
Now, let us look at the another problem statement. Just after leaving the platform,
the diver's fully extended 80 kg body has a rotational speed of 0.3 revolution per second
later in the dive when the diver has assumed the tuck position.
So, here we can assume that the diver's body has a uniform bar in the first case
and the sphere in the second case. So, for this assumption, we can apply the
conservation of angular momentum because no external angular impulse is applied. So, let us
use the conservation of angular momentum. So, we have l g 1 equal to l g 2. So, l g
is the angular momentum and that is equal to I naught omega. So, we have in the first case
m l square divided by 2 that is the moment of inertia into omega 1 equal to 2 by 5 m r square
into omega 2 because l is equal to I omega. So, let us put the values m will get cancelled
because the mass is the same in both the cases. So, we have 1 by 12 into 2 into 2 and the omega
1 is 0.3 equal to 2 by 5 into r. r is the radius the diameter is given it is 0.7. So, therefore,
the radius will be 0.7 divided by 2 into omega 2 and this gives omega 2 equal to 2.04
revolution per second. So, you can see that the omega has increased.
Now, let us look at another problem statement. The 75 kg flywheel has a radius of gyration
about its shaft axis of k equal to 0.50 meter and is subjected to the torque
m equal to 10 into 1 minus e to the power minus t Newton meter where t is in second.
If the flywheel is at rest at time t equal to 0 determine its angular velocity
omega at t equal to 3 second. So, again for this we can use the impulse momentum equation.
So, we have l g 1 plus t 1 to t 2 summation m g d t equal to l g 2. Here it is given that initially
the flywheel is at rest. So, therefore, l g 1 will be equal to 0. Now, l g 2 will be
I bar omega where I bar is the moment of inertia and it is given that the radius of gyration is
0.5. So, therefore, I will be m k square. So, m is 75 kg into k is 0.50 square into omega.
So, let us use equation number 1. So, therefore, we have integral 0 to 3
m is 10 into 1 minus e to the power minus t d t equal to 75 into 0.50 square into omega.
This is using equation number 1. So, that gives you 10 into t plus e to the power minus t
and the limits are 0 to 3 equal to 75 into 0.50 square into omega and that gives you omega equal
to 1.093 radian per second. Now, let us look at one more question and the problem statement is
the following. The force P which is applied to the cable wrapped around the central hub
of the symmetrical wheel is increased slowly according to P equal to 6.5 t where t is in
after P is first applied. Determine the angular velocity omega 2 of the wheel 10 second after
center of 0.9 meter per second at time t equal to 0. It is given that the wheel which has
a mass of 60 kg and a radius of gyration about its center of 250 mm rolls without slipping.
To solve this question, let us look at the impulse momentum diagram of the wheel
that is what is the linear momentum, angular momentum, linear impulse and angular impulse
which are acting on the wheel. So, initially we have this wheel which is
moving with a linear momentum of mv1 and this wheel is also rotating. So, therefore,
there will be angular momentum which is equal to I bar omega 1. This is the situation at time t1
equal to 0. Then let us look at the linear and angular impulse which are acting on it.
So, we have this wheel and this is the hub. So, first of all its weight is going to act.
So, because of the weight the linear impulse will be integral mg which is F
dt and to balance this there will be a normal force. So, that will be integral n dt and we are
applying an external force. So, therefore, the impulse will be P dt and also there will be a
frictional forces, the rolling resistance and that is equal to let us say F dt.
And because of that we have the final situation. So, we have this hub, center of mass is g and
this moves with a velocity of v2. So, therefore, linear momentum will be mv2 and it rolls with
angular velocity of omega 2. So, therefore, angular momentum will be I bar omega 2. This
is the situation at t equal to 10 second. So, we can use both the linear impulse momentum
equation and the angular impulse momentum equation. So, first let me apply the linear
momentum equation which is P1 plus integral F dt from t1 to t2 equal to P2. Let me take this
direction as positive. Now, all the parameters are given. For example, m is equal to 60 kg,
v1 is equal to minus 0.9 meter per second, P equal to 6.5 t and v2 equal to r omega 2.
So, let us put this over here. So, we have P equal to mv 60 into minus 0.9 plus 0 to 10,
6.5 t minus F dt equal to 60 into 0.45 into omega 2. Let me call this equation number 1.
Similarly, we have angular impulse momentum equation. So, that is lg1 plus integral
t1 to t2 summation mg dt equal to lg2. Now, lg1 is equal to I omega 1,
but its direction has changed. So, let us write down minus I omega 1 that is equal to minus
mk square into omega 1 and omega is equal to v over r. So, therefore, this becomes minus
mk square v1 over r and we can put the values. So, this comes out to be minus 60, 60 is the mass,
k is 0.250. So, 0.250 square into 0.9 divided by 0.450 and lg2 will be I omega 2 that is equal to
mk square into omega 2 and again we have the values. So, m is 60, k is 0.250 square into omega
2. Now, for the rotation, let me take this direction as positive direction and put these
values over here. So, we have lg1 which is equal to minus 60 into 0.250 square into 0.9
over 0.450 plus integral mg dt. So, mg is the moment. So, that will be equal to integral 0 to
10, we have the force F which is acting at a distance of 0.450 meter. So, F into 0.450 this
is the moment minus we have force P which is acting at a distance of 0.225 meter. So, 6.5 t
into 0.225 dt equal to lg2. So, lg2 is equal to 60 into 0.250 square into omega 2.
Let us call this equation number 2. Now, we have equation number 1 and equation number 2
and this equation has 2 parameters and there are 2 equations. Therefore, from 1 and 2,
we can find the value of omega 2 and omega 2 comes out to be 2.60 radian per second which is in the
clockwise direction. With this, let me stop here. See you in the next class. Thank you.
