Lecture 39 : Motion of a particle under various constraints

IIT Kanpur July 201
20 followers
Sep 26, 2024
Hello and welcome to a new lecture of classical motion of a single particle. In this lecture
we will start a new topic that is the motion of a particle under different constraints.
In nature if you see that if we do not specify anything else, then when we say that a particle
or a point particle is moving in one dimension, we imagine that the particle is moving in
a straight line ok. Or just for example, if we say that the space has dimension 2 that
means, the motion is now 2 dimensional, then we just think that ok. Now the particle will
move in a plane that where the cases respectively for the uniform motion, where the particle
to move along a straight line, because the only dimension possible was 1 ok.
Now another possibility, another case was the case for the central force where the particle
moves in a plane, because then we can show that the conservation of angular momentum
compels the particle to move in a plane and that plane is the perpendicular to the angular
momentum ok. Now this comes from the very basic nature of the force ok, for the central
force case. In a 3D if we also say that a particle is just moving, then again the particle
can move I mean in any way in a 3D space ok, wherever it wants it can go ok.
Now, under certain circumstances one can wish to impose some limitations on the motion
of the particle and those type of limitations should not come from the basic nature of the
force, but it should come from the basic geometry of the kinematics ok. If we have this type
of limitations, then we can actually call those limitations as constraints ok. So, we
will try to make some examples today and around those examples we will try to discuss the
concept of constraints ok. So, we will make some concrete examples in
today's lecture and around those lectures we will try to understand how constraint motions
are taking place in nature and how according to the different nature of the constraint
forces, we can differentiate or classify different type of constraints or different type of motions.
So, constraints are the limitations or conditions imposed on the kinematics of the particle
ok. So, if I now say that I have a particle the particle will move in a 3D space. So,
for example, I can draw a 3D coordinate system x y z, but I will still say that the particle
will always move in a line like this in a curved line. So, for example, the particle
cannot move here or here, but after sometime t from its starting point it should come here
and then it should come here. I can do the same thing for a circle or a sphere even.
So, let us say I have a point particle and this is a sphere. So, now, again the sphere
is in 3D, but then I say that the particle is moving on a sphere which is having a rigid
surface. So, the particle cannot go inside the sphere ok. So, and the particle also cannot
lose contact of the sphere then the only possibility is that the particle should move on the sphere
always making a contact with the sphere. So, a very well known example for such type
of constraint takes place when we are considering our motion on the surface of earth. So, every
time we are actually moving on the surface of earth and we do not in general want to
fall down ok. So, you will see that yeah. So, this is a case where a particle is moved
a particle is moving on the surface of a sphere ok.
I can make other type of constraints. So, here I can say that the trajectory will be
such type of some equation of a curved line in 3D space. These for this the constraint
is simply that if the particle has at any instant the Cartesian coordinates to be equal
to x y z then the condition for which the particle will be exactly at the surface of
the sphere will be x square plus y square plus z square will be equal to r square where
r is the radius of this sphere ok and that is actually a constant ok. If we think that
the size of the sphere is constant in time. We can generalize this a little bit more we
can say ok the particle should always move on the surface of the sphere, but now the
sphere is changing its shape always being sphere, but it just increases or decreases
its radius in course of time ok. Some following some law which is an explicit function of
time. Let us say we can say that r is equal to
alpha t where alpha is a constant. Then what happens that when the sphere is this one or
this one or this one for all the cases your x square plus y square plus z square will
be equal to r square, but this r square is now no longer constant it will be alpha square
t square ok. I can make a little bit modification in this whole set of examples with the sphere
is that I want now a particle to move exactly inside the sphere, but without touching the
surface of the sphere. So, that means, for example, let us say the
inner surface of the sphere is coated with a is coated with a some material which absorbs
the particle ok and it is a glue type of thing. So, once the particle just touches this surface
ok from inside. So, it is actually glued or stuck to the inside part of the surface ok.
Then in order to survive and continue its motion the particle should not touch the surface,
but the particle should be always inside the surface because the surface is rigid. How
to then impose the constraint? Then the constraint should look like this that for that particle
the x square plus y square plus z square will be strictly less than r square ok and
this is also true whenever this sphere is actually changing its shape with time.
I can do the other way round as well I want a particle which should actually be always
outside the sphere anywhere ok. I do not have any problem, but this particle should not
touch the sphere ok. Let us say I have now a particle outside P ok and here on this outer
surface of the sphere ok I have made some glue type of material and whenever the particle
touches the sphere it is stuck there. So, it will it will be lost and it will not continue
its motion and that is why ok the constraint will be here x square plus y square plus z
square will be strictly greater than r square ok.
If there is no glue then the particle which was inside this sphere could actually move
inside the sphere and also could touch the sphere and the same thing for the particle
outside the sphere that it could move and also eventually it can encounter the surface
of the sphere and will bounce back ok. It is possible I mean whether it is bouncing
back or it is I mean exactly just take some time that will depend on the proper nature
of the surface let us say this surface is rigid. So, the particle will eventually bounce
back and there is no glue. So, we can then say for these last two cases we can use this
type of equality as well. So, x square plus y square plus z square will be less than
equal to r square and in the second case it will be x square plus y square plus z square
greater than equal to r square ok. We can also think of two very useful example
which will be actually used in our discussion that is the case of a pendulum. So, simple
very popular example. So, I can draw a string of fixed length and a mass bob of mass m is
hanging from this the string has a length l and this point is considered to be the origin
of the coordinate axis. So, I can just say at any instant of time
let us say the particle is here or the pendulum is here the bob or the particle is here let
us say ok. In all this possible positions the only one constraint is that the length
is fixed l is fixed or constant ok. If this is true then if we say that this motion is
taking place in an x z plane and z axis is I do not know for instance we can take z axis
to be I can just take like x like this and z like upward ok. So, z. So, it will be all
this z should be here every z should be negative and. So, for example, if we if the particle
is here it is z coordinate is actually minus l. So, z will be minus l and x coordinate
will be 0 here it would have some other coordinates z and x and that will be given by the angle
theta, but whatever be the coordinates one thing should be clear that at any possible
position if the length of the string is not changing then x square plus z square should
be constant is equal to l square. So, you see that we have a condition on the
length of the particle and when we say this is a condition or a constraint this is a condition
on the length of the string and this is actually synonymous of saying that this is a constraint
on the position of the particle. So, if the length of this string is a constant then of
course, you will understand that if you add all possible positions of the mass bob they
will just create a an arc of the of a circle of radius l and that is exactly is manifested
by this equation. So, now, we can move a little bit forward
and by saying we can sophisticate the case by adding some flexibility to the length of
the string, but we now say that this length will be not a constant, but it will be simply
a function of time let us say 1 plus sin omega t times l 0. So, at t is equal to 0 this is
l 0 and l is equal to l 0 may be that is the length and when t changes according to
that actually the length changes. So, that means, you will actually have a situation
where you can have a bob which is like that, but then at some other instant it can actually
have a shorter length and here. So, actually you will see that this is. So, if we just
take this one this formula. So, when t is just increasing. So, from 0 to some angle.
So, let us say the angle is small, but it is actually increasing with time. So, actually
l should increase. So, if l should increase actually you will have a greater length like
this and then even a greater length over here. So, now, if you just try to add all
these positions by an imaginary curve it will no longer be an arc of a circle of fixed radius
l right that you can easily understand. So, this is an example where we can have a constrained
motion. Finally, I will take the example of another one which is the second example
I will be using throughout our discussion that is the example of a particle which is
moving down a inclined plane of some let us say constant angle theta and a particle is
moving. So, let us say it is like a hill and from
the top of the hill. So, let us say this is H and from the top of the hill the particle
starts moving from rest and after some time it is moving, but when it is moving actually
we are imposing the condition that the particle should always be in contact of the inclined
plane and if we do that then this is a constraint on the particle ok. And if you if you actually
do this type of thing then you will easily see that how will be the constraint expressed.
So, of course, you can easily understand that if again this is x direction and I can talk
this is about this axis to be the z direction then every time if you have some x coordinate
let us say for the particle x and z and here x and z ok. So, whenever you take it is x
coordinate and instantaneous z coordinate you will understand that will simply give
x will be equal to tan theta and this tan theta is a constant. So, actually what you
will have you will have. So, let us say I just call this as alpha. So, z will be alpha
x. So, again you see that this is a constraint
on the position coordinates of the particle ok. So, you see that this type of constraint
can also be a little bit made a little bit more flexible. So, let us say now this inclined
plane is no longer a rigid inclined plane and this is made up of ice let us say or some
material which can actually destroyed or can be damaged with time ok.
So, let us say there is a landslide which is going on and some particle which was starting
to move from a very high point of a hill when it starts falling ok. Let us say that these
parts will actually changing it is shape ok and when it changes it is shape then what
happens that the particle will actually no longer move in just a normal straight line
like this, but it will now move in a little bit non-trivial way.
Now if I again put this condition that we have to now find the motion or the kinematics
etcetera for the particle if the particle always remains in contact with this surface
of the hill ok and that is actually you will understand that is an very non-trivial problem
because the hills shape would change in a very random way you do not know what will
be the I mean law of landslides. So, you cannot really predict that what will be the approximate
I mean you can somehow predict globally from it is structure and calculating other constraints
and everything the engineers can do, but from a physicist point of view this is a very non-trivial
problem because you are not sure that this is a little bit more sophisticated even from
this problem of this pendulum with variable length.
Because here you always know that the pendulum is changing it is length, but it is always
a straight line ok. Here the point is that you do not know whether it will be remaining
a straight line or a good curve where you can do some mathematical analysis it may or
may not be, but if I then say the constraint will simply be that the particle will always
be at the contact of the surface of the hill then you have to actually put a constraint
appropriate to that condition ok, but that constraint is a little bit more tricky and
cannot be simply written in a line ok. Now, after talking all these things we can
see that we can have actually basically various types of constraints and the constraints which
I just talked they constitute more or less the I mean the most of the familiar or the
usual examples of classical mechanics. So, if a constraint is such that the constraint
is independent of time ok, explicitly there is no time in the expression of the constraint.
For example, the system with this simple pendulum with a string of constant length, this constraint
has no time involved in this ok or this constraint where the particle was supposed to move on
the surface of the sphere with definite shape ok. So, again this is a constraint where you
cannot see time appearing explicitly ok. Those constraints so, I can now write some
ok. Look at this constraint where the particle
is moving on the surface of the sphere, but the radius of the sphere is an explicit function
of time ok. So, in this constraint you can see time is appearing explicitly ok or here
where you have L square is no longer a constant, but L square is simply L 0 square 1 plus sin
omega t square which is an explicit function of time ok. This is the case for this pendulum
with variable length ok. If you have this then you have the constraints
are not equalities, they are inequalities or equality inequality combined, but whenever
there is a strict equality for example, here here or in this two cases we call that a bilateral
constraints. So, constraints in the form of equations bilateral constraints.
Now if the constraint is in the form of inequality or it has a mixture of equality and inequality
in both cases the constraint including inequality is a unilateral constraint ok. So, this four
vocabularies are very interesting for you, but now I will go to introduce two important
vocabularies which will be of surmount interest for us.
The first one is the holonomic constraints, I can write 5 number 5 holonomic constraints
and number 6 non holonomic constraints. For these two I first write the name and then
I explain what they are non holonomic constraints ok, I just put it singular yeah constraint
ok. So, holonomic constraint is a specific type
of constraint which is expressed in the form of an algebraic and sometimes even trigonometric
or exponential etcetera that is no problem. If you integrate it is good an algebraic even
if trigonometric exponential equality and contains only coordinates that means, position
coordinates and time ok. So, of the examples which I discussed here this one, this one,
this one, this one all are holonomic constraints ok, all are holonomic constraints even the
first one ok this is also holonomic constraint where you have this one.
For the second case we associated with this inclined plane this is a bit tricky and we
even do not know how to model, but if we can write in a proper manner smartly in the form
of a algebraic form with this change of shape then of course, it will be another holonomic
constraint. What is a non holonomic constraint? So, non holonomic constraint is first example
all the unilateral constraints that means, constraints involving the inequalities and
constraints involving the velocity coordinates. A special comment is that and can never be
integrated to a holonomic constraint. What is the meaning of the last sentence I am coming
to that for example, I say that ok for the movement of a particle in this inclined plane
where there is no corrosion or no landslide I know z is equal to alpha x, but of course,
I can equivalently say that z dot equal to alpha x dot, but this is an equality this
is without any explicit appearance of time, but this is a constraint where only you can
see velocity coordinates are appearing there is no position coordinate no time ok.
So, can it be holonomic? The answer is yes because this is called a pseudo holonomic
constraints because if you integrate this it will finally, give you z is equal to alpha
x plus c. Now c you can ah get rid of by choosing initial conditions appropriately
I mean suitably ok. So, in case you have this type of thing then this is not a non holonomic
constraint this is a holonomic constraint. Let us say I give you an example x dot equal
to alpha x y I say that the motion of a particle is such that let us say in a plane x y that
it is x dot that is the x coordinate of the velocity is proportional to x y that is the
product of x and y then you cannot you cannot cannot integrate.
So, it cannot be integrated to F x y all this position coordinates let us say for 3 d x
y z and t is equal to 0 ok. So, that is why this is non holonomic constraints. In this
occasion I actually have written ok the general expression for a holonomic constraints. So,
the general expression of a holonomic constraint is that you can always have a function ok
which is involving x y z and t ok that is the I mean most general case possible in 3
d space ok which will be equal to 0. That means, there will be a equality. For example,
if you have x square plus y square plus z square is equal to L square then of course,
this function will be x square plus y square plus z square minus L square ok is equal to
F x y z and that will be 0. Again I am taking the case for this pendulum.
So, x square plus z square is equal to L square. So, a pendulum of fixed length. So, you will
have x square plus z square minus L square which will be now the x z and x and z and
this is 0 ok. So, finally, pendulum with variable length pendulum with variable length
you can actually write x square plus z square the example which we all have already discussed
L 0 square times 1 plus sin omega t whole square ok.
Now, then the function will be is a function of x z and t, but that will be x square plus
z square minus L 0 square 1 plus sin omega t whole square will be equal to 0 ok. So,
now, you see that for any holonomic constraint you can always have this type of form ok.
So, in the next lecture we will discuss the importance of holonomic constraints and how
using those constraints we can actually think of formulating a very easy way to solve different
type of usual problems of classical mechanics ok.
Thank you.
