Lecture: 53 Translation and rotation of rigid bodies: examples

IIT Roorkee July 201
61 followers
Sep 28, 2024
This lecture covers a few examples of plane motion and the concept of relative acceleration.
Hello everyone.
Welcome to the lecture again.
In the last lecture, we discussed about the translation and rotation of rigid bodies.
We saw that the general plane motion can be considered as the combination of the translation
and rotation about a fixed point.
We also discussed about the relative velocity.
Today, we will discuss few examples of the relative velocity and also discuss the relative
acceleration.
So, let me write down the first problem statement is following.
The pinion A of the hoist motor drives gear B, which is attached to the hoisting drum.
The load L is lifted from its rest position and acquires an upward velocity of 2 meter
per second in a vertical rise of 0.8 meter with constant acceleration.
As the load passes this position, compute A, the acceleration of point C on the cable
in contact with the drum and B, the angular velocity and angular acceleration of the pinion
A. So, first of all, it is given the load L moves in the upward direction with a velocity
of 2 meter per second in a vertical rise of 0.8 meter.
From here, we can find out what is the velocity of the load at that instant.
So, let us do that, we know that V square equal to U square plus 2 A s.
Now, V is given, it is 4 equal to 0 plus 2 into A into s, s is 0.8 meter and from here
we get the acceleration.
So, this is the acceleration, it comes out to be 2.8 meter per second square.
This is the acceleration of the load.
Now, this load is connected by a cable, therefore, the acceleration of the cable or rather the
tangential acceleration of the cable will be 2.5 meter per second square.
So, this is the tangential acceleration at point C.
And the same is true for the velocity also, the tangential velocity at C will be 2 meter
per second.
So, let me write down the tangential velocity, let me call it V because there is no radial
velocity, will be 2 meter per second and the tangential acceleration at point C will be
2.5 meter per second square.
Now, from this velocity, I can find out what is the normal acceleration.
Now, note that the normal acceleration A n still at point C will be V square divided
by r.
Now, V is given, it is 2, so, therefore, this will be 2 square divided by r, r is the radius
of the gear.
It is given that the diameter is 0.8 meter, so, this is the diameter, therefore, the radius
will be 0.4 and that comes out to be 10 meter per second square.
Therefore, the acceleration of point C will be square root A t square plus A n square
and A t and A n is known to us, so, that comes out to be 10.31 meter per second square.
Now, in part B, we have been asked to find out the angular velocity and angular acceleration
of the pinion A. Note that the pinion A is connected inside the gear.
So, therefore, to find out the velocity and acceleration, first we have to study what
is happening at point B, which is inside the gear.
So, note that the omega, the angular velocity and the angular acceleration alpha will be
the same for both point B and point C. So, therefore, the omega B or the omega C will
be V divided by r.
Now, the velocity at point C is known, it is 2 and the radius at C is 0.4, so, that
comes out to be 5 radian per second.
Similarly, the angular velocity at point B or C will be A t divided by r.
Now, at point B, it is 2.5 divided by r is 0.4.
So, therefore, it comes out to be 6.25 radian per second square.
Now, note that the gear B drives the pinion A. Therefore, the tangential velocity and
the acceleration will be the same.
So, velocity V equal to r A omega A equal to r B omega B and the acceleration r A alpha
A equal to r B alpha B. So, therefore, the omega A will be r B over r A into omega B
and omega B is known, r B and r A is also given in the figure.
So, that comes out to be 0.3 divided by 0.1 into omega B is 5, so, that is equal to 15
radian per second.
Now, alpha A will be r B divided by r A into alpha B.
Now, r B and r A is known, alpha B will be equal to alpha C or alpha B, so, that is 6.25.
So, this comes out to be 0.3 divided by 0.1 into 6.25 and that is equal to 18.75 radian
per second square.
Now, let us look at another problem statement.
The common configuration of a reciprocating engine is that of the slender crank mechanism
shown.
If the crank OB has a clockwise rotation speed of 1500 revolution per minute, determine for
the position where theta equal to 60 degree, the velocity of the piston A, the velocity
of point G on the connecting rod and the angular velocity of the connecting rod.
So, in this question, we have been asked to find out what is V A and what is V G.
So, first of all, we have to note that the point O here is fixed and therefore, point
B is making a fixed axis rotation.
So, if it is making a fixed axis rotation, that at any instant the velocity of point
B will be perpendicular to OB.
So, therefore, this angle has to be 90 degree.
Let me write this down, point O is fixed, therefore, B will make a fixed axis rotation
and therefore, the velocity of point B will be perpendicular to OB.
Now, if an observer is fixed at point B, then he will see as if point A is making a fixed
axis rotation.
So, from the prospect of B, point A is making a fixed axis rotation, therefore, the angle
of V A with respect to B will be perpendicular to the connecting rod AB.
Now, let us look at the velocity of point A. Velocity of point A, therefore, will be
the velocity of B plus V AB.
Similarly, the velocity of point G will be the velocity of B plus V GB.
Let me call this equation number 1 and this as equation number 2.
Velocity of B can be very easily find out, V equal to r omega.
So, therefore, velocity of point B will be r, which is 0.125 into omega.
Omega is 1500 revolution multiplied by 2 pi divided by 60 and that comes out to be 19.63
meter per second.
And as I said, the direction of VB will be perpendicular to OB.
Now, what is the direction of A?
The direction of A or let me call it V A is along the horizontal, because this piston
A is moving in the horizontal direction and the direction of V AB, so this is again I
said that the direction of V AB is perpendicular to the line AB.
And this is because of the relative motion.
This is how point B will perceive point A. Now, let us look at the triangle ABO.
So we have the velocity of A and we have this point O and then we have point B. It is given
that this length is 350 mm, this angle is 60 degree and the arc is 125 mm.
Note that the velocity will be perpendicular to OB.
So, this is the velocity of B. Now, from here, I can find out what is this angle beta.
This angle beta, so for that I can use the sine law, which is 125 divided by sine beta
equal to 350 divided by sine 60 degree and from here I get beta equal to 18 degree.
So this beta comes out to be 18 degree.
Now, since one of the velocity VB is known and also we know the angle beta, let us look
at the velocity triangle to find out what is V A and what is V AB.
So we are looking at the velocity triangle.
So some of the geometry is involved.
So we have the velocity of point A in the horizontal direction.
AB rod is making an angle of 18 degree.
So this is something that we find out and V AB is perpendicular to AB.
So therefore, that angle will be 72 degree.
So we have V A, V AB, now we have VB.
Now note that this VB is making an angle of 90 degree with respect to OB and this angle
is given, it is 60 degree.
So if this angle is 60 degree, therefore, that angle will be 60 degree and therefore,
this angle will be 30 degree and since this is also VB, that is also VB, so they are supposed
to be parallel, therefore, this angle will also be 30 degree and so is this angle.
And from the triangle, total sum should be 180 degree, therefore, this comes out to be
78 degree.
Now we can use the sine rule to find out all the velocities.
So we have V A divide by sine 78 degree equal to VB divide by sine 72 degree.
And the velocity of B is known, this is equal to 19.63, something that we have find out.
So from here, very easily we get V A equal to 20.2 meter per second.
Now we can also use V AB divide by sine 30 degree equal to 19.63 divide by sine 72 degree
and that gives me V AB equal to 10.32 meter per second.
Therefore, we can find out what is omega AB, the angular velocity of A with respect to
B, it will be V AB divide by the length AB.
So that will be 10.32 divide by AB is 350 mm.
So that is 0.35 comes out to be 29.5 radian per second.
And note that since B is rotating in the clockwise direction, therefore, B will see as if A is
rotating in the counterclockwise direction.
So this will be in the counterclockwise by the sense of B. So this is how B will sense.
We have been asked to find out what is VG.
So velocity of G will be velocity of B plus velocity of G with respect to B.
Now this was our equation number 2 and VGB will be GB times omega AB and GB is 100 mm.
So 0.1 into omega just now we have calculated 29.5.
So that comes out to be 2.95 meter per second.
So now we know VGB, we also know VB.
So in principle we can calculate what is VG, but note that this is a vector sum.
So you have to take care of the direction also.
So we have VB which is equal to 19.63 and this makes a 30 degree angle from the horizontal.
And we have VGB, so this is my VB.
We have VGB and that makes an angle of 72 degree from the horizontal.
So therefore, this angle will be 78 degree.
And from here I can find out what is VG.
So that will be square root this square plus that square plus 2 VB, VG and the angle between them.
So that gives you VG equal to 19.24 meter per second.
Now let us understand the concept of relative acceleration.
We saw that if a rigid body is making a general plane motion, then the motion can be analyzed
as a combination of a translation and a fixed axis rotation about a point.
So let us say that point is B. So it is the combination of the translation and the fixed
axis rotation about B.
And we also saw that the velocity of point A will be the velocity of point B plus velocity
of A with respect to B.
Now if we differentiate it, then we get the acceleration of point A equal to the acceleration
of point B plus the acceleration of point A with respect to B.
And all of them are vector quantity.
Now note that this acceleration of point A with respect to B will have two components.
It will have the normal component and the tangential component.
So, AA can be written as AB plus AAB, the normal component plus the tangential component.
And what is the value of the normal component?
AN will be V square divided by R. So VAB square divided by R or you can also call it R omega
square.
And VABT will be R omega dot or R alpha.
Let us look at the direction.
So let us say omega is like this, alpha is also like that.
Then AABN will be towards AB and AABT will be perpendicular to AB.
Now based on this concept, let us look at a problem statement and the previous question
is repeated here.
So, the crank OB has a constant clockwise angular speed of 1500 revolution per minute
and for the instant when the crank angle theta is equal to 60 degree, determine the
acceleration of the piston A and the angular acceleration of the connecting rod AB.
So, we have been asked what is the acceleration of piston A and what is A with respect to
B. Now, just now we saw that the acceleration of A will be the acceleration of B plus the
acceleration of A with respect to B. So, that is ABN plus ABT and all of them are vector
quantities.
Here, the crank OB has a constant clockwise rotation.
So since it is constant, therefore, omega dot will be 0 and therefore, ABT will be 0.
So there is no tangential acceleration of point B.
So therefore, point B is only under fixed axis rotation.
So we have AB, only the N component because this AB can also have AT and AN, but AT is
0.
So, AB will be equal to AB only N and that is equal to R omega square.
Now, R is 0.125, omega is 1500 into 2 pi divided by 60 square and that comes out to be 3080
meter per second square.
So therefore, AABN can be find out now.
So AABN will be R omega AB square and R is 0.35 and omega AB we have calculated in the
previous problem.
So omega AB was 29.5 radian per second.
So that will be 29.5 square and this comes out to be 305 meter per second square.
So now, we know ABN and if you find out ABT, then we know what is AA and what is AAB.
For that, let us look at the geometry of the acceleration.
So we have O here, A here and we have B. The acceleration of A will be along AO.
So this is the direction of the acceleration.
Point B is making a fixed axis rotation like that.
So therefore, the direction of ABN will be towards BO and there is no ABT.
To point B, point A is rotating in the anticlockwise direction and the component of AABN will be
along AB and AABT will be perpendicular to AB.
And also note that we have already determined that this angle is 18 degree and this angle
was given that it is 60 degree.
So now, let us look at the acceleration polygon because we know some of the accelerations
and the angle between them.
So we have the acceleration A, which is in the horizontal direction.
Then at 60 degree, we have ABN.
So this is 60 degree and this one is ABN.
Its value we have found out.
The value is 3080.
And at 18 degree, we have AABN and its value also we have found out.
It is 305.
This is 18 degree and then at 90 degree to it, we have ABT.
So this is AABT and this angle will also be 18 degree from the geometry.
So now, let us equate the horizontal and vertical component so that we can find out all the
values.
So let me take this as positive direction and that as positive direction and I am equating
the horizontal and vertical accelerations.
So AA will be equal to 3080 cos 60 degree plus 305 cos 18 degree minus AABT sin 18 degree
and the vertical component is 0 equal to minus 3080 sin 60 degree plus 305 sin 18 degree
plus AABT cos 18 degree.
So now, we have two equations and there are two unknown.
From here, we can find out that AABT equal to 2710 meter per second square and AA equal
to 994 meter per second square.
And the angular acceleration of AB which is alpha AB that will be AT divide by R and AT
is 2710, R is 0.35.
So that comes out to be 7740 radian per second square in the clockwise direction.
With this, let me stop here.
See you in the next class.
Thank you.
