This is our 1968 F100, part of Fat Fender Garage's Designer series. This insanely custom truck is a beautifully deep wine red with bronze trim and accents. The titanium Schott wheels on this sweet bumpside are also a bronze color and bring out the interior's brown Relicate leather with a three striped motif. This beast has hood scoops (ridiculously hard to do.. probably won't be attempting that again) and awesome side air vents. Under the hood, Jason walks you through the Gen 3 Coyote swap with a Whipple supercharger and a 6 speed Tremec Magnum transmission. Check out below to see the cool products we offer that are featured on this truck:
Make sure to follow us on Instagram, TikTok, and Facebook to see the behind-the-scenes on our builds and projects, and subscribe to our channel and hit the little bell icon so you don't miss a video. Thanks for watching.
Check out our site for hundreds of quality and custom products for classic trucks. Ford, Chevy, GMC, you name it. www.fatfender.com Feel free to shoot us an email if you have any questions at [email protected].
All right guys, we are here at Fat Bender Garage in Gilbert, Arizona. I'm Jason, I'm the host of
this show. Oh wait, actually it's not a show, but we're actually just going to talk about a really
cool truck right here. This is a 1968 Ford F100, believe it or not, and this thing's been completely
redone top to bottom. Every little detail has been thought about and it's pretty badass, and I want
to kind of go over some of the details. So if you just kind of generally take a look at it, it's
this really dark burgundy brandy wine. Like it's super dark, it almost starts to turn brown. Why
does it turn brown? Well we kind of got this brown bronze goldish looking trim on it, and because of
that it actually kind of starts to cast a little bit of a brownish shadow into it. It looks really
cool, especially with these titanium wheels right here. You take a look at these. Those are pretty
sweet, nice shot wheels, beautiful looking wheels. So they fit real nicely tucked in there, super tight.
The truck sits just, you know, if you look right here, I mean that's not very much. About five and a
half inches roughly is what we're hitting right about there, so it's running low. So we got this
kind of tucked in just a little bit, right, so when we turn corner to corner we're not gonna
we're not gonna rub, and we got plenty of clearance and a lot of room under there. So
another little thing to kind of take a look at, take a look at this like they call this a bump
side, right, because this bumps out. And oftentimes there would be like a small piece of molding,
or there would be a giant piece of molding in the later years that would cover the whole thing
and would bump it out even further, or if you had a really base model there'd be no molding. So what
we kind of like is we took a base model look, but we kind of pointed this and we really worked hard
to make sure that this had a nice crisp line. So when you look down the entire truck, that is like
we actually use a laser. So we put all this together and we do all the body work in the
body shop. We actually use lasers to make sure it's laser straight. When we final assembly,
it looks that good. So pretty sweet, but let's let's look under the hood because
honestly as beautiful as it looks, you know, we want to check it out. So we've got some really
cool intricate hood scoops in here. Probably never do it again, I'll be honest with you. That was,
man, every time you try to cut and weld into these old hoods, a lot of stuff happens. I think
that's probably our third hood. It took three times, several different people trying it.
We finally figured it out and it's done, but it looks pretty cool. Nice little louvers right there.
All right, so under the hood we actually have a really nice Gen 3 Coyote motor. Got a Whipple 3.0
supercharger. You've got your master cylinder, your brake booster. This is a manual and so we've
got a little bit of a clutch reservoir right here. We've got our cold air intake. We've got this
massive filter right here. Our MAF sensor. Got some breather ports in here. Our wizard radiator
that's been completely Cerakoted, nice and dark. Everything is just black underneath there. Now,
under the hood, I like a nice satin look. I've seen a lot of people do it. I think it looks
really attractive. It softens it up a little bit and really looks good in especially these
burgundy colors. It really looks sharp. You can kind of see where we've got this grille kind of
bolted in here. Let's a little bit of the heat out more than anything. We're trying to let heat out.
Obviously, air is not blowing into it, which would be nice to cool it, but for us, we want to make
sure we're creating a little bit of a vacuum so that heat can escape. Anytime you kind of sheet
metal everything in, you start to trap more and more heat and so this allows us to alleviate some
of that. So there's our condensers tucked in here. We've got our heat exchanger that we use. It's an
Edelbrock heat exchanger and we've got it barely tucked in. There's just not a lot of room because
the grille kind of slants back. There really just isn't a ton of room to put anything in there, but
you know, we just squeezed it in there. Of course, it comes already powder-coated black and so
it kind of disappears. We did keep the original bars right here, though, painted black.
Well, if you can see that, we kept everything else that kind of a
bronze gold color, but then we kept those nice and black. So I don't know. It's a look thing,
right? You just try to change it up a little bit. And then really cool, we got these really nice
hood hinges. They've all been Cerakoted. That's what's holding our hood up because obviously
that's where the the inner fenders would have mounted, but we had to change everything and
modify it to get more space and so we had to come up with a new design. So we have these available
for $67.72 and very soon to be on the website will be $73 to $79. You can just kind of see,
I mean, look at this. This is nothing. And you can just kind of take a look at my hand.
This is just super, really effortlessly. This thing just goes up so nice that it's nicer
than my actual brand new F-250. It's that nice. It's just that good quality product.
We'll talk about some of the other little details. Of course, we've got a really cool
air vent that does let air come through here. It's more aesthetics. I suppose it does provide
a little bit of cooling for the back. It breaks a little bit, but I'm not sure how much they're
getting, but it's mostly aesthetics. And then, of course, we got our bumper painted that same color
and we've got this here. And then you can see these really cool lights. We actually sell these
on our website. Just a nice, simple, clean little LED light. Since we're not using a lot of
bezels and stuff and trim, we didn't really want to have a big, giant bezel there, so
we designed that. We can pull this down. We can take a look here. And then you can see,
we'll finish these up, but these are some charge ports and there'll be some cables you can just
put in there and keep it simple. This is our battery disconnect if you needed it,
but it's also a breaker as well. It's a 200 amp waterproof Bussmann breaker, so pretty cool.
Let's take a look inside. We're just working on finishing up the interior. We've got the
steering wheel we haven't put on yet. It's a nice spark steering wheel, but we didn't put it on
because one thing I've learned is mechanics don't have very clean hands and sometimes they touch
them and they make them messy, so we hold off putting them on as much as we can. We're just
finishing up this really cool Reliquit interior. Take a look at it. We've got these three stripes
here, which coincide with the interior, so we complemented that. Of course, we've got a nice
billet piece right here, a really nice armrest. These are our door panels that you can have done
like in our upholstery kits. These are exact same door panels. We've customized them a little bit
nicer for the build, but again, the same concept and design, and it works real great.
We've got an AC valance right here that we've put in, and I think Spencer the other day talked
about this part right here that we've made. This is the original part that comes with your steering
column, and then you've got the bracket, but in the 6772, this is just all open. It looks terrible,
and so we've actually made this part here, and you can then paint this black, and it just kind
of covers this up. Then, of course, we've got our little valance that hits here. We've got these
nice seats here. They're power, but we don't have it on, so it doesn't work. We've got seatbelts.
That'll be a three-point harness seatbelt in here. You've got lumbar control and everything.
Then we do have 10-inch Focal subs in the back, and then they've got this really cool console
that they're working on here. It's a manual, so the shifter will be right here. They've got to
put that back in, but they were Cerakoting the shifter actually, so it'll be black with a black
boot, and then this will be a phone charger right here, and then we'll have some cup holders built
in here, a nice little armrest with a little shallow storage compartment for miscellaneous
items. There's also a USB-C and USB charge port right here, and so all that is connected also to
his RetroSound stereo system, so we didn't put a big stereo in this one as far as the display.
We wanted to go a little bit more of a kind of a stockish look to a degree, but very upgraded
stock look, so check out this little thing right here. I don't know if you guys can see that right
there. This little guy right here, can you see this? Yeah, it's modern, but if you're driving
and it starts to go dark, that will actually turn your headlights on automatic, so it's an automatic
headlight control, so you're never going to be without headlights on, so if you forget to do it,
they'll always come on for you. Yeah, super cool. Everything's been perfectly fit, perfectly gapped.
We're basically really just, I don't know, maybe a week away. We've already done some tuning on it.
This thing runs like a machine. It's built to be driven. This thing really, with the supercharger,
a six-speed Tremec Magnum transmission in it, this thing really gets after it pretty good. Very fast,
plenty of power, looks good, runs good, handles good. You got sway bars up in front sitting on a
Porterbilt chassis, guys. It doesn't get any better than that. If you're thinking about building a
truck and you want to build a nice truck or maybe, which is like, this is kind of what we call our
designer series trucks, where guys come in and say, hey, I want to build a truck, but I want to build
something that's a little bit different than what everybody else has. This is our designer series.
If you want to build something like, hey, I got a cool truck. I don't want to spend a ton of money
on it, but I know I want to buy a new chassis. I want it to ride and handle well. I don't mind patina,
then that's really perfect for our revival series, where we kind of revive it and get it back on the
road and running well. Super high-end truck, top-tier customer. This guy's super awesome.
His brother's got a truck that we're going to do a revival series on as soon as we finish this one
up. This will debut at SEMA, so if you guys are going to be going to SEMA this year, this will be
there. It'll be in the Meguiar's outside booth. We're pretty proud to be able to go to SEMA. As you
know, it's getting harder and harder to go to SEMA these days. A lot of vendors are kind of dropping
out and it's harder to get spots, and so we're still finding a few spots here and there, but
really excited to be able to take this one to SEMA. So with that, we're going to close on this one.
Definitely stay tuned. Follow us on YouTube. Follow us on Instagram. Go to our Facebook. Follow
us there. Like, subscribe, and we'll keep you updated. We also are launching new products. We
have about two new products a week that we will be launching for you guys to kind of get up to
speed on all the new product that's coming out. We've got a ton of stuff that's still coming out.
I think we even launched a couple, two or three this week. So anyways, we're really excited about
it. Stay tuned. Happy hot rodding. I hope you're enjoying your classic pickup truck, whether it's
Dodge, Ford, Chevy, whatever it is. Have a good time with it, and we'll see you next time. Thanks.