NEW BUILD! 2JZ Swapped Ford F-150 Shop Truck, a Fast and the Furious Tribute Project

Cars Arena
18 followers
Yes – we’re doing a dedication build about a truck that had like two scenes from a car movide from 2001. But man, what a movie it was: the Fast and the Furious 1. We’re imagining what Paul Walker’s character would have built the Racer’s Edge shop truck into, if he took ownership of it… he would swap in a 2JZ, duh. Call it fanfic. Call it car cosplay. Call it whatever, but we’re about to have a 2JZ powered Ford F-150 shop truck. And that riiiiiips.
#GJWcars #GJWauto #GJWcar #cararena #choicecar #selectcar
I don't think we've ever had anyone do a burnout for that long and then get out
of the car and it's still doing a burnout. Congratulations, you are a bloody
savage my friend.
Well the shop's nowhere near ready for a new build but that's not gonna stop us.
What are you doing today Herc? Today we are introducing a new project to the
entire Slayer Studios. New build, new shop, kind of how it goes, right? Why are you here Cody?
I'm looking forward to this one.
Of course we had to bring in a special guest because he's the right person for the job.
And he's also gonna be the first one to shred it when it's done.
I think it was like what, two years ago?
When we talked about this on the Twitch stream?
I said, one of my favorite cars was a...
Well just to run that back a little bit, we used to do a thing called Spicy Slice.
Mad Dog, Spicy Slice.
That's way too much bro.
So we've been talking about this build for a while.
We're in a new place, we're in the right place.
We've got the right people.
Let's build a new parts truck.
Any excuse to build another project.
Alright, we'll follow you guys.
Yep. There she is.
Ready?
She's a gem right?
Not quite a lightning but...
No that's why we're just gonna call her the faux lightning.
Or is it the frightening?
The frightening.
Were you saving that?
Like for the past two years?
You had that thing for two years.
I don't remember yesterday.
Here's the background. When we started Car Cane Supply
we were like, you know what, we need to build a parts truck
and obviously inspired by the Racer's Edge
Ford Lightning, except those are like 30 grand
and we wanted to put a different engine in it anyway.
But this is basically the same
body that the Ford Lightning was
except it's absolutely not a Ford Lightning.
So obviously, the reason Cody's here
You said that this was your favorite car
from the past series.
I mean, you realize that for most people at home
this is probably not even on their top ten list.
Let's just make it clear, this isn't Cody's favorite.
Not this one.
The potential of what this could be.
The frightening will be.
After Cody mentioned that
we were like, well, what would Paul's character
Brian, what would this be
in the movie if he could have built it himself?
And what does that mean? It needs under the hood?
It needs a 2JZ under the hood.
So that's obviously
what we're going to do.
2JZ swap it. Hurt, what wheels are we going to do on this?
You know, that's a tough one. There are a lot
of options. But I'm sorry, I gotta
skip over the wheel part. We have to
keep the shifter.
The tall boy shifter?
We have to have the two shifters
just confuse the shit out of people?
Whoa.
You guys noticed this?
It's literally fully optioned.
This guy went and was like, hey man, you want an automatic
or standard? You said yes.
Well, apparently
this thing still runs, Cody, so I think
you have to give us a reason to pull the motor out.
You want to give it
it's last burnout before we take it.
It might be it's first burnout.
It could very well be it's first burnout.
I don't know. Have you really looked
at this thing?
I would say it's probably it's first
sober burnout.
A little extra HP
here.
There we go.
So Cody, this is gonna be
your first time driving it and then the next
time driving it will be finished
at Fuel Fest, right? Yeah, June 19th
at Irwindale. This is like deja vu
because we made this exact same plan in
2020 and then, you know, that whole thing happened
and now we're doing it all over again. It's like almost
down to the day. June 19th, which is also
Father's Day weekend, also
a week before Fast 9 launches.
I mean, Irwindale's pretty sick.
We're gonna have drag racing, drifting.
So you should drag race this, slide it,
you should do everything we possibly can with it when it's done.
I'm doing it all. Alright, that's what's up.
My clutch pedal stuck
to the floor and there's no
clutch pedal.
Check this out.
Yeah.
Well, now you can just use the automatic shifter.
That's how it works. Now you just
use the auto shifter, right? Little scumbag
labs inspo. Take the forklift over, we put
the nose against the container.
This man's
thinking, go get the forklift.
Go get the forklift.
Oh, that's my drink.
Alright, drop it. You don't want to bend the hood.
We're gonna keep the hood open for this.
Maybe we shouldn't stand right here.
My drink's still here.
This is Hoonigan innovation
right here.
How is this still going?
There we go.
Just leave it.
Get out.
I don't think we've ever had anyone
do a burnout for that long
and then get out of the car and it's still
doing a burnout.
Congratulations, you are a bloody savage, my friend.
I didn't ask
when I should stop. Yeah, I was
kind of going off your guys' reactions, but I've been to a
burn yard before too, so I kind of have an
idea of what the hell's going on.
So you know not to stop until something breaks.
He kept looking over, I'm like, you better
keep going.
Alright, sir.
I guess it's time to roll. Now that it's nice and hot,
we'll roll it in the garage.
Well, we don't have anything
else here yet. The lifts aren't here,
but we got enough to pull an engine
out. We got a toolbox, we got a hoist
right there. We've already got this too.
As you can tell by the green cover, this is out of an
Aristo. The cover's green.
And by green, we mean
blue, because it's the same color
as my Audi.
What, you thought we weren't going to bring it into this
show too?
Let's all agree, Scotto's car is blue.
Everybody, let's just say
Scotto
Your car is green.
Well, that's how it keeps
going. So, but for real, two days are
really hard to find unless you holler at the boys
at JD's in California. They just got a plug over there.
What else we got? We got
a whole bunch of parts. This is like a
knockoff Ford Lightning bumper, right?
What is this? Is this that like... It's like a urethane.
It's a urethane. That's nice. What are these?
Seats. Sparko seats?
Sparko seats. See, one nice thing about having
car cane supplies, we can literally just order all
our own stuff now, which
makes it pretty easy.
Yo, it's 2,000
all over again. You have to have a triple
stack. Like, I don't know
if the new kids even know what this is.
You see a triple stack in someone's
A-pillar, you know that they got at least
three gauges in their car.
I know you're going to say you know it's fast,
but that's not... No, no, no. You know they got at least
three gauges. You got that AutoZone stoich
Yeah, yeah, yeah. You got the stoich gauge. You got a
voltmeter. You got a voltmeter. Maybe
two voltmeters. Well, for your system.
Yeah, for your system. So, let's walk through the
plan real quick. So, 2J
under the hood. And then we're going to do a T-56
transmission. A whole bunch of gritty stuff.
A whole bunch of missing motors. We're trying to keep
it somewhat period correct, so the gritty stuff.
So we're trying to keep it like, you know, if you
were building it in that time era,
those are the parts to build. We bought a bunch of body
panels to replace things like the grill
and the bumper. I think that
fender, we need a new fender over here.
We got that. We got new carpets.
Are we doing like a
cover in the back? Like a tornado cover
or something?
Did it? No, it had a whole bunch
of parts. He had a bunch of, they had a bunch of parts
in it.
That's how we have to roll up the Fuel Fest. It's just
all the parts stacked up like that. Is this the
rear bumper on the Lightning? Or do they have like
a roll pan? I think they have like a roll pan.
Yeah, I don't think
that with the Lightning came with a hitch.
But we should still put a hitch on this thing. Cause then we
could still tow, like, short cars
or smaller cars around. We're not gonna tow anything.
You don't start. Sorry man, I gotta think.
Where you at?
This is the art of pulling an engine.
First, you start by yanking on it.
Find out what's still holding it in.
Michael, you did a good job
today, alright? You did a good job.
We did a good job.
So Dan and I got the motor stripped down
and taken exhaust manifolds off.
This whole pile of stuff. While Vinnie, Ron
and Micah struggled
to get this motor out. No,
this thing's sick. We got the motor out now.
2J's undressed, so it's time
to actually start putting that thing back together.
So we were gonna pull the interior out today
but the motor coming out took
a little longer than we expected. And honestly
undressing a 2J is kind of
a feat in itself as well. It takes a long time.
So we're gonna call it
where we're at right now.
Back on the Frightening
again. We have gotten
a little bit more progress done off camera
so I just wanted to catch you up on what we're doing.
Pretty much what we've done is sabotaged
a lot of this electrical fuel line, cut it out
real quick. Left some of the electrical
as far as controlling this cause I think
we're gonna still run the factory fuse box.
But there used to be a big ol' ugly tank
that was right here and now it is
on the floor. So the problem with this
thing is that
it's got a ton of fuel in it. We have a brand
new carrier that we're gonna be dropping into here
and then we're gonna be adding some Detwerx things to it
to make it work good to
support our 2JC.
So this is
the old one. It's got a single pump
set up in it. But this is
gonna be our replacement.
So as you can see, also has a
float but now it's got two pumps on it.
But because we don't do nothing normal
we went ahead and got
ourselves some Detwerx
DW 400's.
So what we can do is mount
both of these in this
position here, chop some lines, do some
bracketeering and then we would have
more than enough fuel supply
for the 2JZ that's gonna be in this truck.
Hit it.
It's okay!
Tank's in!
So listen, today
it's gonna be the A-Team.
Me and her today on this. We have a couple
of things we gotta get done.
Here's our fancy list. As you
can see, we're moving in more. We have a light
now.
Look, we have four post lifts.
It's in the air, not on jack stands.
So yeah, we're a shot. We're moving in.
We're gonna be doing the timing belt on the engine,
the oil pan, because
we need a rear sump, the oil pump
because of reliability. Both of these
are really reliability items. We don't wanna have
any issues later. We're gonna have to
mount the transmission to
the engine and hopefully by the end of the
day drop the engine into the truck.
You got the Quetzal flywheel already? Yeah, you wanna show us some
stuff? Let's do it.
Granis Racing sent us
a bunch of stuff. It's basically
a 2JZ flywheel with a
T56 splined clutch
so that you can make a
V8 transmission go on a 2JZ.
It's kinda cool that you can do this kinda thing,
you know? Because I feel like back in the day
it wasn't that easy to do. It wasn't an option.
Yeah, but now it's like the standard.
You can run whatever transmission
you want on whatever car with
a bell housing, a flywheel
and some science.
Since you're the V8 boy, you tackle this
and I recently just did that
not too long ago. So it should be
easy. Well, I mean, you
should be good at it.
I got a pulse.
I did it.
Alright, so after wrangling
Supi into helping us out and getting the timing
belt on, now it's time to dress the front of the
motor back up, get this thing on a
hoist and start on the transmission.
Getting it done. Has this ever been done?
I don't think it's ever been done.
Is this the world's first?
Does that just mean we're dumb?
Possibly.
Oh gosh!
Now we have the flywheel on.
We have the clutch on. This is all tilting
stuff supplied by our friends at
Granite Racing. So now it's time to put the bell housing
in. It should all fit just fine.
There it is. Two dowel pins
to align it. That's it. Now we gotta measure
the base of this to the
pressure plate after bolting this on and then
get the air gap for the release bearing.
Then we can slide the transmission on.
Progress boys, progress.
Well, there
it is. 2JZ
T56 in the frightening.
Now, so next up
we're gonna have Supi create us some engine mounts.
We'll try to get the positioning of the motor better
and we're pretty much gonna continue
building it in the car.
We made the engine mounts and we stocked them in
car cane supply so you guys can do this.
Comment below if you have an F1
shitty flare side
that you want to put a 2JZ
in. If enough of you
comment below, Supi will jig the
mounts up and sell them to you and make
your life miserable.
I'm good at that. Good job today boys.
Can you just say, good job today, us?
Good job today. Turn the camera away from him.
Good job today, Hurt. Nice work
today, man.
Yo! What's up, friend?
What's up, babe? Look at this.
It's the most comfortable suit.
I figure if I can't
work on cars in bed,
Hoonigan brought me a bed that I can work in.
Might as well bring bed to work on the cars.
Ron's here today as well with us. What up?
We got Vin and Supi and they're already
chopping it up, doing things. Well, it's been
chopped. It's been chopped
but they're going through it all. We got a lot of stuff to
do today. We made a list for you guys again
so you can see what's actually happening
today. Alright, so this is the list.
I'll be jumping on the carpet and mounting the seats
today. Ron's going to be jumping in on our
suspension. Dan's going to be helping us out with the
engine and transmission mounts for the truck.
Vin's going to be working on the trans tunnel cover.
Then we got to mount the radiator and the intercooler to make sure
that the truck runs nice and cool. Alright, let's see where
the boys are at. What's going on in here? I'm going to have my first
go at fabrication. Dudes were like
you, you're going to make
the floor for this. I said, cool
I've never done anything like that and
unless you want me to hammer a piece of metal
in there and screw it in, like that's
that's it. That's exactly what we want you to do.
Which will either end in a complete disaster
or I'll become
a pretty safe abrogator.
Alright, so they got the bolt-on boy
on suspension work. We've got this
kit from Street Edge. Little
Beltech stuff right here. This is
actually a whole lowering kit. As you can see
for the rear, we got the whole C-Notch
kit going. But first,
we'll get started on the front. Just a little bit
of lowering spring action. Brand new spindle.
Freshen this thing up.
This, this is a loaded weapon
right here.
Yeah, there we go, there we go.
Oh my god.
That just pointed right at me.
That was a grenade.
So, we are
currently working on getting the
Sparco seats put together
so that we can test
fit them in the truck prior to
laying in like carpet and all
that stuff. So, we'll build
the bracketry for this. Right now,
seat rails because this has to be adjustable
because apparently a bunch
of people are going to be driving.
Again, shop truck.
Alright, so just in time.
Alright, you good?
So, we got a Mishimoto
intercooler and a radiator and some
fans. The Mishimoto gang always helps us out with
projects. We love them. So, now we are
going to test fit the bumper
and where the intercooler is going to go. So, basically
I just made this little bracket right here.
It's very simple.
It's not done, but we need to place
them on the intercooler. It's got to go upside down because
the piping's got to come out of this pocket over
here. So, this will build
more brackets, which is why Bracket Brian is here.
He could smell that I needed brackets.
I could smell it from my house.
He wasn't supposed to be here today. Yeah, Bracket Brian.
Brackets want to smell like
fresh bread in the air. Exactly. So,
Bracket Brian smelled that I needed
some brackets. So, he showed up
and so we're going to try to do this real quick. First,
we're going to get the bumper on with some
tape, obviously.
Look at this smaller jumpsuit!
What in the
is this man?
I don't know if the people are talking shit, saying my car's slow
or they want something. Brian.
Where's Snoopy?
Where's Snoopy? Where's that Snoopy
character? Let's go!
Let's run this shit!
What piece of shit did you bring today?
What piece of shit, baby?
I got a Mercedes 2.0
diesel with Alpine stereo.
What's up? What you got?
Did you feed your dog? Holy shit, your dog came.
Wow. Yeah. That's terrible.
That's a great turnie.
Yo, this is all new.
We need to put locks on the gates.
Hey, you guys are in my neighborhood.
That street, I own.
I own Suzanne Street. So, who wants to
race for money? Let's throw the whole wallet down.
Who wants it? Who wants it?
Look at that Costanza wallet.
Let's go. Come on.
All done, Ron.
Oh, one side.
But, I mean, look at this.
You got the Beltech shock in there.
You got the suspension source kit.
This is looking pretty beefy.
Lowering spring in there. Brand new shock. Brand new upper arm.
Brand new ball joint pressed in.
Just cleaned this guy up a little bit.
Cool, man. Nice work.
Ready to go home?
You look like you're ready to take a nap all day.
I've been in bed all day. You guys just don't realize it.
That's why we got so much done today.
We actually didn't do so bad.
Intercooler mounted up.
Seat sort of mounted in.
Engine sort of mounted in.
Transmission tunnel sort of covered.
I mean, we're half the suspension.
Half the suspension.
Half assed in the back.
That's it.
We got this bracket intercooler.
Bracket Brian and myself worked this out.
Minor details to work out still.
We had a lot to do today other than this.
We got a little caught up.
The idea is intercooler piping is going to come
somewhere around here. Boom.
And then from there, Dan got the motor
kind of lined up. Still needs a little tweaking.
But he's got the base plates on
for the engine mounts.
So he's going to make some nice engine mounts for that
probably tomorrow or something like that.
He made a transmission tunnel
just so we can have a nice, clean,
sleek, race style looking setup.
Yeah, you did a really good job.
That's honestly the best thing that's happened today.
2% of the day in 2 hours.
I said if it took me 4, it'd be good.
It took me like 5.
We're not fabricators.
We're just learning as we go.
We got a lot to do and not a lot of stuff to do yet.
We're in between moving, so we're working.
But it's not over yet. This thing's going to be cool.
What you got going on today?
You know, everything else.
Probably the most important part is getting
everything mounted up today.
We had just too many people.
We've got to be pretty still while all this is going on.
I've got to get the motor
in the right location.
I've already made the plates for it, so basically
I've just got to connect the dots on the plates, get the motor centered up,
nice spot, mount the trans,
and then the main focus is
actually making this a 2JZ F-150.
Alright, let's get to it.
Hey, remember guys.
Safety first.
It's not terrible.
Better than my first attempt.
It's getting a little better.
You okay?
Alright, so now that we're done with this bracket,
it's time to hit it with some Steel-It.
I thought I was done yesterday, but the intercooler
was a little too floppy, so we added another
piece of the bracket. This was painted,
and I welded this together, and you didn't even have
to clean off the paint. It's weldable paint.
I don't know all the science behind it, but all I know
is you can spray it and weld on it if you need to, and then
spray it again.
Just like that, we came,
we saw, we conquered. Your boy got
the Mishimoto intercooler mounted up
with the extra beefy bracket.
Do a little pull-up on that thing.
Feet off the grid.
Alright.
That intercooler ain't going nowhere, okay?
What's that?
Motor that's fully suspended by itself.
So there's officially
a 2JZ
with a T56 inside of an F150.
Oh, did we show them your mounts back here?
Look at this bad boy.
Yeah, I just used a factory crossmember and made that
fit like it's right at home.
So yeah, just like that, 2JZ
F150, suspension's all mounted up.
We're waiting on some wheel bearings, but
other than that, there is so much room
for activities. Turbo sits
here, massive downpipe goes down
in there, and then the intake manifold.
Should we just throw it on? Yeah, let's throw it on.
Hold on, put the camera down.
Alright, the intake manifold looks
beautiful in there. Yo, that's the factory
factory throttle cable
on a 2JZ, it's perfect.
So yeah, all that's left now is
plumbing.
Fuel lines
and wiring harness.
I think, I heard Jamo might be coming by
to knock out some of that stuff.
Well then we don't have to worry about none of that.
We're pretty much done here, so
we'll just let Jamo, good luck, have fun.
Goodbye.
Can we talk about how this isn't even a product
promotion, but Hurt is out here
just styling our brand new
PJ collection. Comfortable
for at home, at the track, at
the shop. I've always dreamed of being an Instagram
model. You're nailing it right now.
