Lecture 49: Translation and rotation of rigid bodies

IIT Roorkee July 201
61 followers
Sep 22, 2024
This lecture discusses the plane motion, translation & rotation of rigid bodies, and the concept of relative velocity.
Hello everyone, welcome to the lecture again.
Today, we are going to discuss the translation and rotation of the rigid bodies in the context
of the plane motion.
Therefore, let us first discuss the plane motion.
A rigid body executes plane motion when all parts of the body move in parallel plane.
Now this plane motion can be divided into several categories.
For example, we can have rectilinear translation.
So here in a rigid body, it moves in the straight line.
So every line in the body, so let us consider a line and let us say this point is A, this
point is B, then every line in the body, it remains parallel to its original position
at all times.
So this line AB will remain parallel.
So let us say A prime B prime, then AB is parallel to A prime B prime.
So here there is no rotation of any line in the body.
Now we can also have curvilinear translation.
Let us say we have a rigid body and let us say we have two points AB and this rigid body
moves in some curved path, but at all time these points AB which are now A prime B prime
remains parallel to AB, then it is curvilinear translation.
So here the paths are curved, but again every line on the body remains parallel to its original
position and again there is no rotation of any line in the body.
Now we can also have the fixed axis rotation and this happens when the body rotates about
a fixed axis.
For example, let us say I have a rigid body and let me fix some point on the body, let
me call it O.
Now let us say I have a point A and a point B on this body, then when this body rotates
about O, point A rotates in a circle and point B also rotates in a circle about O.
So if a rigid body rotates about a fixed axis, then all points of course other than those
I have fixed in the body, so here in O, let me write down other than those on the axis
move in concentric circles about the fixed axis.
And we of course know how to analyze the fixed axis rotation because it is in the circle.
So let me just summarize those results that we have obtained earlier.
Here we know that v velocity is r theta dot theta cap because r is constant for circular
motion and this I can also write as v equal to r omega theta cap, the magnitude is r omega.
This is the velocity and the acceleration a can be written as let us say a n plus a
t where n is the acceleration along the r direction and a t is the acceleration along
the theta direction.
So this is equal to minus r theta dot square r cap plus r theta double dot theta cap.
So here a n is r, theta dot is omega, so I can just write down omega square or I can
rewrite it in different form v square over r or v omega etc.
And a t the acceleration along the tangential direction is r theta double dot, theta double
dot is alpha, so I can write down r alpha or r omega dot.
Here omega is the angular velocity and alpha is the angular acceleration and a n is the
acceleration along the r cap direction and a t is the acceleration along the theta cap
direction.
Let us look at the direction, so we have this rigid body, we have fixed a point and this
rigid body is rotating about the fixed point O, we have taken some point A, this point
A is going to make a circular motion around O, this is the direction of n, this is the
direction of t, the velocity v will be r omega, the acceleration along the t direction
is r alpha and the acceleration along the n direction will be r omega square.
Because it is fixed axis rotation there would not be any velocity along the n direction.
Now these equations I can also write down in the you know vector form, so vector equivalent
v can be written as omega cross r, acceleration along the n direction was r omega square can
be written as omega cross r and a t or the acceleration along the tangential direction
will be equal to r alpha, so alpha cross r.
Now let us look at the rotation with constant angular acceleration, we already know the
equation for rectilinear motion which is v equal to u plus a t, s equal to u t plus
half a t square and v square equal to u square plus 2 a s.
Similarly, we have the equation for constant angular acceleration which is omega equal
to omega naught plus alpha t, theta equal to theta naught plus omega naught t plus half
alpha t square and omega square equal to omega naught square plus 2 alpha theta minus theta
naught.
Here this theta naught and omega naught they are the angular position and angular velocity
at t equal to 0.
Now we have seen the translation and the fixed axis rotation of the rigid body, in general
we can have the combination of them and it is called the general plane motion.
So general plane motion it is the combination of translation and rotation.
So let us say I have a rigid body, let me fix two point on the rigid body A and B, then
in general plane motion this body moves and simultaneously it can also rotate.
So therefore, this is the combination of translation and rotation.
Now let us understand various kind of motion by an example.
So this is the schematic of a reciprocating engine, let us say this point is A, this point
is B and this one is O, here the crank OB makes a fixed axis rotation about O because
of that the slider A moves in the rectilinear direction.
So slider A this performs a rectilinear translation, the crank OB performs a fixed axis rotation
about O and the connecting rod AB this performs a general plane motion because it is also
moving and it is also rotating as general plane motion.
Now let us understand the relative velocity, let us say I have a rigid body and this rigid
body is making a general plane motion, let us say I have two point A and B on the rigid
body then the same points AB after time t are like that.
So we have seen that any plane motion is the sum of the translation plus a fixed axis rotation
any plane motion of a rigid body can be replaced by a translation of an arbitrary reference
point, let us say that reference point here is B and a rotation and a simultaneous rotation
about B.
So what do I mean by that?
So we had this general plane motion, the motion can be analyzed by having two kind of motion,
one is just linear translation of this point.
So this is the translation of the arbitrary point, here I have taken B as the arbitrary
point and the simultaneous rotation about B.
So about B you can see that point A was earlier here and now this has rotated.
Now the absolute velocity of this point A will be, so V of A will be the translation
velocity of B which is VB plus the velocity of A with respect to B.
Now if there is an observer who is moving with B but not rotating then he will see as
if point A is making a circular motion.
So let me also write it down to an observer moving with B but not rotating, to him point
A appears to perform a circular motion.
In that case the velocity of A with respect to B will be equal to r omega or in the vector
form VAB will be omega cross r.
Now let us look at some of the problems based on this concept and the first problem statement
the rate of 4 radian per second square, write the vector expression for the velocity and
acceleration of point A when omega equal to 2 radian per second.
So here we have this bar and we have to find out the velocity and acceleration of point
A. It is given that the x axis is like this and the y axis is like that and the bar is
rotating in the clockwise direction.
So therefore omega will be minus 2k radian per second.
Now alpha is also given, alpha is 4 radian per second square and for point A we can write
down the position vector r.
So vector r for point A will be this is 0.4 meter, this one is 0.3 meter.
So therefore it will be 0.4i plus 0.3j.
Now the velocity and acceleration can be find out because V is equal to omega cross r and
this will be i, j, k, omega is minus 2k, so 0, 0, minus 2 and r is 0.4, 0.3 and 0 and
this is equal to 0.6i minus 0.8j meter per second.
Now the acceleration has two part, so this has the component in the n direction and also
the component in the t direction, a n and a t and we know how much is a n, a n is omega
cross omega cross r and a t is alpha cross r, remember this formula here a n and a t.
So let us put the values omega is minus 2k cross omega cross r we have already calculated
it is 0.6i minus 0.8j plus alpha cross r, alpha is 4 radian per second square and that will also
be in the k direction. So alpha is 4k into r, r is 0.4i plus 0.3j and this comes out to be
minus 1.6i minus 1.2j plus 1.2 minus 1.2i plus 1.6j and this is equal to minus 2.8i plus 0.4j
meter per second square. Now let us look at the magnitude of V, so the magnitude of V
will be square root 0.6 square plus 0.8 square that is equal to 1 and this you can also get
by using V equal to r omega, so V equal to r omega, V equal to r, r is the distance which
is equal to square root 0.3 square plus 0.4 square into omega, omega is given it is 2
and this is equal to 0.5 into 2 which is of course equal to.
Similarly, the magnitude of the acceleration a will be square root 2.8 square plus 0.4 square
which is equal to 2.83 meter per second square. This also you can get directly by using a n
and a t, so a n is r omega square which is equal to r we have find out it is 0.5 into omega is 2,
so omega square will be 4 that is equal to 2 and a t is equal to r alpha, so r is again 0.5,
alpha is 4, so that is again equal to 2. Now acceleration a will be square root
a n square plus a t square which is equal to 2 square root 2 and that is again equal to
roughly 2.83 meter per second square. Now let us look at another problem statement,
the wheel of radius r equal to 300 mm rolls to the right without slipping and has a velocity
v not equal to 3 meter per second of its center O. Calculate the velocity
of point A on the wheel for the instant represented. Now in this question we have
been asked to find out the velocity of point A and velocity of point A I can find out using
the concept of relative velocity, so v A will be the velocity of point O plus velocity of point A
with respect to O. Now point A with respect to O is making a fixed axis rotation, therefore v A
will be equal to v O plus omega cross r O. Let us say this is the x axis and this one is
the y axis, therefore v O will be 3 I meter per second. Now r O I can find out from the figure
from the geometry, it is given that theta is equal to 30 degree and r O is 200 mm,
therefore it will be minus 0.2 I cos 30 degree plus 0.2 j sin 30 degree and this is equal to
minus 0.1732 I plus 0.1 j meter. Now let us find out the angular velocity
omega of the wheel, so omega will be v 0 divide by r, v 0 is 3 divide by r, r is 0.3 and its
direction will be in minus k because it is rotating in the clockwise direction,
so therefore minus 10 k radian per second. Now we have omega, we have r 0, we have v O,
so therefore let us put everything in equation number 1, so v A will be 3 I plus omega cross
r 0, so I j k 0 0 minus 10 and minus 0.1732 0.1 and 0 and this gives you 4 I plus 1.732
j meter per second and its magnitude v A will be square root 4 square plus 1.732
whole square that is equal to 4.36 meter per second.
With this let me stop here, see you in the next class. Thank you.
