Drafting and Making a Late Victorian Waistcoat (1895)

Victorian Threads
4 followers
4 Video Views·Jul 24, 2024
Follow the process of drafting and constructing a late Victorian waistcoat from 1895 using historically inspired materials and techniques. This video covers every detail—from fabric selection to pad stitching—bringing a period-accurate garment to life.
Materials Used:
Wool: Ayazmoon Fabrics, NYC (½ yd)
Silesia: Bias Bespoke (½ yd)
Tailor’s canvas: Steinlauf & Stoller, NYC (¼ yd)
Buttons: Daytona Trimming, NYC (6 ct)
Synthetic baleen (4mm x 1mm): Burnley & Trowbridge
Ribbon casing: M&J Trimming, NYC (1 yd)
Brown cotton thread: John Lewis
Black silk thread (pad stitching): Sil Thread, NYC
Black silk buttonhole twist: Sil Thread, NYC
Hello, good day.
Okay, so today we're not going to bother
with lengthy introductions.
Instead, today I shall just provide you
with the obvious knowledge that today
I shall be attempting to draft
and reconstruct an 1890s waistcoat
according to the instructions outlined
in the 1895 Keystone Guide to Jacket and Dress Cutting,
which I shall link down below
if you wish to follow along at home,
although I must continually remind the internet
that I am not in the business of providing tutorials,
as believe it or not, there is no such thing as truth
in this murky and uncertain business of history.
Anyway, okay, so for the pattern
for this, I am going back to my old friend, Mr. Keystone.
I don't think that's actually his real name.
I am maybe a little bit daunted by this.
This is slightly more complicated than a skirt.
It's a lot less straight lines
and a lot more things that actually need to fit
in certain places.
There are lots of instructions,
so hopefully I will just be able to follow these
step-by-step, draw the appropriate lines,
and get something that's sort of like a waistcoat.
It's probably easier said than done,
but we're gonna give it a go.
So these instructions are to draft
something sort of akin to this,
which will translate into this set of given measurements.
The waist size is fine for me.
It matches my waist size, which is really cool.
I have the sense that it's going to be
a little bit short-waisted
because I'm a little bit longer-waisted.
I'm not a 36-inch bust.
Even with the padding on the corset,
I'm not a 36-inch bust.
So this is going to be an adventure.
These are technically, then,
the ideal late 19th century measurements.
So what I think I'm going to do
is I'm not going to alter the pattern at all.
Obviously, if this pattern would come out too small,
it would be something that I would have to probably
think about doing alterations for whilst I'm doing this.
I think I should mention that this drafting system,
this book, in the beginning,
he has this whole sort of series of drafting systems
for essentially a sloper for the upper body, the waist.
And he goes through and sort of illustrates
the drafting system for all body types,
whether you are thin, whether you are larger,
whether you are stooping.
So all different sorts of postures and body types.
So don't be discouraged if you are not.
This Victorian measure,
this is just, I guess, the sort of standard.
And of course, he also advises, you know,
for larger figures, you put more darts in different places.
So there are sort of options
for different body types out there.
Okay, so this draft is proving
a little bit more complicated,
only because he's not necessarily
giving you every single instruction.
So I think there's going to be
a little bit of conjecturing going on here on my part.
What I'm just looking at right now
is I'm working on this bit here.
I don't know if this is going to make any sense to you here,
since you're not technically following along step by step.
But essentially, he's not really giving me
these distances to this point.
So I'm not entirely sure.
He's telling me to round off the armscye,
but I don't know where it's supposed to come up to.
So I guess this is something that I'm going to just make up.
I went back and I had a look
because in the beginning of the book,
there is also a series of drafts, again,
like I said, for other, for basic standard waist.
So I thought maybe it's just a super basic thing
that he addressed in the beginning, but no.
So yeah, this is something
that I'm just gonna have to make up.
In theory, this distance from here to here should be,
oh, the outside shoulder,
which maybe I can actually take the measurement for.
Okay, I'm getting a rough estimate of five inches.
I'm doing this on myself,
so I'm not entirely sure how accurate that is.
If this is five inches,
that would put 0.3 around here,
which actually looks about right.
We're gonna go ahead with that,
which means that this point should match up
round this way, maybe.
Oh, he has me do X first,
which looks about halfway between.
So here's this point.
I mean, there will be mock-ups.
We shall see how this goes.
Okay, so this is very non-linear and very confusing,
but now he's having me do this whole bit up here
where we figure this out,
which doesn't really make sense
because he wanted me to draw this arm's eye thing
way before, and I didn't know what points
to connect to them to, which is strange.
But I guess we'll now take care of this
and then go back and see if this is correct.
I didn't say this earlier,
but at some point, again, later on,
he had me go in and then put this 0.12 here,
so I had to move this arm's eye from
because I had it ending sort of round here,
and then it ended up having me put 0.12 here,
so I had to move it over a little bit.
So yeah, it's a little bit out of order.
So if you are attempting this pattern
or if you are attempting other keystone patterns
that maybe are also written like this,
we will obviously see what the overcoat has to do,
but the skirt was fairly straightforward,
none of all this nonlinear nonsense.
But yes, so if you are attempting a keystone pattern
and you are confused because you are wondering
how you get a point out of nowhere,
it's probably somewhere later in the instructions.
Okay, so according to the instructions,
I did exactly what I was supposed to do.
So yay for figuring things out in unconventional ways,
but also yay for instructions.
Okay, so here's where I am so far.
I've got the actual waist part drafted,
all the darts and all the actual pieces present.
What I haven't done is I have not yet put the collar bit on.
That is actually on the diagram
on the other side of this page that I was referencing,
and I didn't see it.
So I was like, where's the collar?
There is a whole other page in the book
full of different collar lapel options.
So I thought I would have to go back and look at that,
print that out because I hadn't done so,
but it turns out that the collar instructions
are just right here.
So I'm going to go proceed and do that.
I'm running out of light, so I might not film it.
I may do it in the wee hours this evening
and then come back tomorrow morning
and start cutting this out.
So I'm going to go draft a collar,
and I shall see you soon.
Okay, so I have completed the mock-up for the waistcoat.
I got absolutely no footage
of the editing, fitting process for this,
which I kind of severely regret
because I feel like, well, you know what?
It's always a bit of an existential crisis with this
because I thoroughly have no clue what I'm doing
when I'm fitting these mock-ups.
And in a way, I feel like it's sort of setting a bad example
for people who don't necessarily have much experience
in this to sort of see me flailing about
not really knowing what I'm doing with this.
But at the same time, I mean,
I guess if you don't have any clue what you're doing,
maybe it's good to start somewhere.
I don't know.
The point is I have completed this mock-up.
It was a journey.
Obviously, it did not fit me whatsoever in the bust
in this whole top chest area.
And I did leave a little bit of room
because I do intend to put some padding up here,
just in this upper shoulder area
because that's the historical thing to do.
I did fit this to my waist,
which I ended up having to let out just a little bit.
I'm also not entirely sure if this is correct.
I ended up adding a little gore to the hip area
to give it a little bit more spring
because that's what it does on me.
It just made this side area sit a little bit nicer.
I'm quite happy with how this fits and how it sits.
So after a lot of fitting and altering and cutting
and refitting and altering and refitting and altering,
we are now ready to move forth.
I think what I'm going to do is I'm going to go ahead
and, well, I have to slit this all apart
and get the pattern pieces
and make the alterations to my actual pattern
so that I can cut out this proper fitting shape.
So first I need to transfer all of the alterations
I made on my mock-up to my pattern
so that I can actually cut out the correct shapes this time.
I'm doing this by marking any changed seams,
then cutting the shapes apart without seam allowance.
I can then lay these net muslin pieces
on top of my old pattern, mark the new lines,
then cut the pieces to shape.
I'm going to be making up the waistcoat
out of this wool check that you may recognize
from our garment district adventure.
It's also the fabric I used for the walking skirt,
so I'm very much looking forward
to having a nice, matchy, tweedy ensemble.
The pieces are laid onto the fabric warp-wise.
I actually just came across an interesting line
in Bertha Banner's Household Sewing with Home Dressmaking
where she mentioned that the warp
or selvedge length of the fabric
should always be running length-wise on the body
since it's the stronger grain of the fabric.
So the selvedge edge of the fabric
will be running parallel up and down
the length of the waistcoat
with the center front edge on the straight grain.
And I'm just marking everything out with some tailor's chalk.
Likewise, the center back is also placed
on the straight grain.
Normally, this is indeed straight,
but as we are all probably well familiar
with my spinal grievances by now,
I had to make some minor adjustments
to that center back line on the mock-up
to get it to fit properly.
Don't ask how I did this on myself.
There may or may not have been witchcraft involved.
I'm also cutting a facing piece
for the lapel out of the wool check
since the lapel turns outwards
and you'll see the inside as the outside.
I've gotten this pattern piece
by tracing off that lapel bit from my front panel pattern
and included about the first inch of width
all the way down the center front edge.
This will also help to strengthen the edges
where the buttons and buttonholes will be
and will help to finish off those front edges neatly.
I'm also cutting out the front panel
and front facing pieces out of some tailor's canvas,
which will help to give the front of the waistcoat
some nice structure.
I'm cutting out both pieces here,
but at this point, I wasn't actually sure
where and how many layers of canvas I should be adding,
so I decided to cut it all and experiment with it later.
Finally, I'm also marking out the front and back pieces
on this brown cotton Silesia,
which is basically a glazed cotton
and was commonly used for waistcoat
and coat linings in the 19th century.
At last, I can now cut out all of my traced pieces.
So I have got all of my pieces cut out.
I have got a front and a back of this cotton Silesia.
I've got a facing and a front of this hair canvas.
What I've actually done is I've gone ahead
and I've cut out the full shape out of the canvas.
I don't need this much.
I really only need, I mean,
probably just about this facing amount
just on the front here,
so I will go through and trim this off at some point.
I just wasn't sure how much I needed whilst I was cutting it,
so I just cut the whole thing,
which was probably not a very historically accurate thing
to do because they would not have wasted this much material,
but you know what?
Cabbage is cool.
We can always use this for something else.
So what I will be doing is I will probably go ahead
and I will trim this up to about the dart
because I don't think I want to have any of this canvas
adding bulk to the waist at this dart point,
so I will probably cut it to about here.
I don't know if I'm going to go
all the way up to the dart or not.
I don't know yet.
I feel like this whole process is just me sort of guessing
as to what I'm doing just before I actually do it
because tailoring is a thing I have admired greatly
from a distance but have yet to actually attempt myself,
so I feel like a lot of these techniques
are things that I know in theory
or things that I've seen done places
but have never actually implemented myself,
so this is going to be a bit of an adventure.
So yes, definitely the beginning of a long
and exciting historical tailoring journey,
but here is where we are starting.
So I also have one of every piece cut out
in this wool tweed.
So I've got a back, I've got a facing for the lapel,
and I've got the front.
So my first step for this is I'm going to go through
and just thread mark all of these top pieces
because all of these top pieces will get interlined
with this canvas and I will lose all of my chalk lines.
So what I'm going to do first
is I'm just going to go through
and I'm going to thread mark the outer lines
as well as the darts on all of these top pieces,
and then I think we go ahead with the pad stitching
and the basting of the interlining into the actual thing.
Once that's been done,
I'm starting off by getting all of the darts stitched in.
There are obviously two on either side of the front pieces,
but there are also two very small darts
on either side of the back.
So these are pinned out of both the wool layers
and the lining layers, then stitched.
Okay, so I have just laid my canvas piece
on top of the front piece, which has its darts in it now,
just to sort of try and get a sense of vaguely
where I want this to go.
I know I cut a full piece,
which I don't technically necessarily need,
and then I was hypothetically going to chop it
just right here, probably up to this first dart.
However, the wool that I'm using is very, very drapey.
I'm not entirely sure if this is going to be too light
for a waistcoat and if I should just interline
the entire thing with the canvas, if that will help,
or if that's just going to create too much bulk.
I think it will be okay.
What I think I may do is I may chop the canvas sort of here
and then have it come down to just the edge
of this dart here.
That way, the front of it will be stabilized up through,
you know, it'll hold these darts out,
hopefully a little bit, and then we'll create less bulk
over here on this waist area.
So I think that is what I'm going to attempt to do.
Otherwise, I think this is coming together
a little bit more quickly than I anticipated,
which is really good.
So I'm going to see how far we can get now.
So after pinning the canvas layer in place,
I'm then going through and basting it down,
doing my best to keep it held in the three-dimensional shape
it wants to live in now that the darts are in,
rather than forcing it to lie flat.
This way, hopefully it'll want to sit more naturally
against the three-dimensional shape of the body.
I'm then holding these dart edges together
with a herringbone stitch, or as it's referred to
in ye olde 21st century, a cross stitch.
That done, I can now proceed
to actually put the waistcoat together.
It's only a center back seam and two side seams
for both the wool and the lining layers,
so this won't take a minute.
I should probably have noted
that when I was basting down the canvas layer earlier,
I did not baste down the lapel area
because this gets pad stitched separately.
Not a temporary basting pad stitch
as we've been doing thus far, but a permanent one,
which means that the stitches are much smaller, neater,
and done in a black thread that won't be visible
from the wool side of the fabric.
The process of pad stitching the lapel
not only secures the canvas and fabric layers
firmly together, but allows you to carefully sculpt
the two layers into shape so that the lapel
actually wants to roll back against the waistcoat
instead of flopping forward.
To do this, I'm gently rolling the fabric
around my index finger just at that break line,
or the line where the lapel edge will fold back
to mold it into that turned back position.
I actually had posted a picture of this on my Instagram
a while back when I was working on it
and got a couple of really interesting questions
about the pad stitching process,
so hopefully this answers things a bit.
I actually think it's really cool
how we can sort of have a bit of an interaction
when I'm actually posting the pictures in real time,
since it's a little bit unfortunate
that with the videos, you only get to respond
after the project has been completed and documented,
so I guess let it be known now
that I'm going to start posting
some more real-time progress shots over on the Instagram,
and I'm going to make an effort to look at your questions
or bits of intrigue in the comments
so that I can properly address them in the videos,
because community and sharing knowledge and learning stuff,
it's all really cool.
Anyway, once my lapels are all ready to go,
I can then go ahead and stitch together the shoulder seams
as well as the little center back seam on the collar
so that it becomes one continuous piece
that I can stitch down to the back neck edge
of the waistcoat.
And the seam allowances of these little inner curves
must be clipped in order for this to happen,
or basically, it will not cooperate.
I have also gone ahead and stitched
the little center back collar seam on the facing pieces
so that I can now go ahead and get these attached.
The facing gets pinned onto the center front
and the neck edges of the waistcoat
with right sides together.
I'm then just trimming back the seam allowances
to about a quarter of an inch
so that there's a bit less bulk when I turn the layers.
Now, before I put the lining in,
I'm just going to quickly add a bit of padding
into the shoulder area
so that the lining can conceal the padding
and hold everything neatly into place.
This is history's great secret for amazing silhouettes.
A bit of padding is added to that hollow bit
between the shoulder and the bust
to make everything sit smoothly
and avoid that little crumply spot by the shoulder
if you, like most people,
don't naturally have a chest shaped like this.
This is seen everywhere in the 19th century,
in dresses, bodices, coats.
So, of course, I am really eager to experiment with this
in my waistcoat endeavors.
I have already roughly determined the shapes needed
for my particular padding requirements in a fitting,
so I'm just duplicating those shapes
to put into both sides.
You'll want to use several slim layers
of sheet cotton wadding and stagger them
so that the edge of the padding isn't too extreme
and noticeable from the outside.
This is then pad stitched into place with the long stitches,
catching only the canvas layer interlining
and not going through to the wool layer on the outside,
since these are not temporary stitches
and will need to be left in.
With that done, I can now go ahead and get the lining in.
This I'm just securing into place
with lots and lots of pins
to ensure that everything is positioned appropriately,
then turning under the raw edges
of both the lining and fabric layers on all sides.
The facing pieces, however,
fold over top of the center front edge of the lining layer.
Everything is then secured into place by hand
with tiny felling stitches.
At this point, everything is secure enough
that I can go ahead and remove
all of my temporary basting stitches.
Next, the center front and lapel edges of the waistcoat
are top stitched by hand with small running stitches
to ensure that the edges are held very crisp and flat.
And then it's time for buttonholes.
I seem to have forgotten to record my marking out of these,
but there are six buttonholes
placed an inch and a half apart here
with the buttonholes worked by hand in black silk twist.
The buttons are just these little enameled ones
that I picked up in the garment district,
and these get stitched on quickly
in their respective positions.
It should be noted that I completely accidentally
positioned the closure in the men's fashion,
that is left-hand side over right-hand side,
as opposed to vice versa,
but I'm not at all mad about this,
and in fact, I think it was very much a happy accident.
Also, whoever needed gender norms anyway?
Now, there's just one more thing that I want to do
before I call this waistcoat complete,
and that is to put some little stays
behind the two darts at the front.
This was quite common practice for bodices and even blouses
to keep a nice rigidity to the front,
even on top of the corset.
I do plan to actually wear this waistcoat without a corset,
so I think having the stays in front
will still help to give it that subtly 19th century shape,
even in an everyday dressing situation.
So I have four synthetic baleen bones
left over from my corset project
that will be perfect to use for this,
and I'm just pinning them on inside some casings
made from the remaining leftover deerstalker ribbon.
I must confess that the stay casings
would probably not have been made from petersham
like I'm using here.
They likely would have been done with a narrow twill tape,
but I couldn't be bothered to go out and buy some
and thought I'd just use up what I had left in my stash,
which is my feeble claim to historical attitude,
if not necessarily historical practice.
The casings are felled down on both sides
to secure them into place,
as this is how it appears to have been done
on the two 19th century bodices and blouse
in my own collection.
And thus the waistcoat is complete.
This project has thoroughly solidified my obsession
with historical tailoring,
although it does require lots and lots and lots
of skill and practice in order to get just right
and beautifully clean,
and I haven't quite gotten there yet,
but this project was still so satisfying to work on.
I love the precision and technique involved in tailoring,
and I do think that the waistcoat came out nice enough
to wear regularly in everyday dress.
I definitely plan to continue experimenting
with making some more waistcoats and tailoring in general,
because I think it's a skill that forces you
to start looking at your sewing and your skills
and crafts generally with a more detailed and strategic eye,
which I think can be wholly beneficial.
The main thing I wish I'd done differently
for this project is I really wish
I had put in a watch pocket.
I didn't think to,
since I put a watch pocket into the matching skirt,
but I sort of severely regret this decision.
I mean, how amazing would this look
with the happy addition of a little watch chain?
But I suppose this is an endeavor
to be explored for next time.
And with that, I shall thank you
for joining me on this process,
and I wish you luck should you now be off
on your own historical tailoring adventures.
