809. Sanding/Grinding Glaze Fired Pieces with Hsin-Chuen Lin 林新春 釉燒後續研磨處理

Hsinchuen Lin
205 followers
Jun 19, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
all right uh today I like to talk about
uh when you have a pie done with after
the glaze fire on uh how do you take
care of it sometimes the uh the bottom
of your foot might be a little bit rough
after glaze fire or some of them have
been warped so it's not staying very fat
Still
rocking here are the uh Diamond sending
pet you can use the diamond sending pet
too if you have a smaller uh trip or
something of the glaze or something that
is rough you can use the sending pad to
send it down okay so this is very handy
too um you can buy it from supply store
they come with a different grits
ofum um it's not cheap okay like uh
around approximately 15 to 20 $20 a
piece so this is uh the uh the other
solution for uh smoothing the base and
also here I bought a many many years ago
is the diamond
disc and I have uh three 15 sizes 12 in
14 and
uh 8 in and they come U I bought a
different grit of them uh this one is
260 and the other one is um I believe is
200 and this one little bit closer maybe
180 or something so that is the diamond
disc and uh you could buy it um I bought
it I bought it from eBay uh they have
lots of them um can just search the
diamond laboratory discs and they should
come out and also I think uh Amazon has
that too or some U clay some clay tool
supplier they also have it but
personally I prefer without any sticking
on to or attaching on to the the bat
okay I like to uh use my un setup so
just the dis is itself is
good okay let me do my
setup first if you have a bed pin here
uh you might want to put it
on a um a bat so to raise it
up put it on the b i use the other side
[Music]
too and then um for the disc without
when you you ascended without moving
around you can use this this is called
absorber okay it's it's like a back
gripper or you can use the back gripper
but I bought this from um it used to
call absorber but the uh it's also
called Shamy okay sh sh a MM y Shamy and
those are come in a sheet which is
larger and can you just trim it trim it
to the size that fits your disc or fits
your uh your your B so this is
the it looks like
this and you just uh trace it Trace with
your your bed and then you can cut
exactly the size and then um
then you just punch two hole you can
just go and fold it and then use the CES
fold it and thises cut so that this will
be up for the B pin if you want to use
it for
your for your bed okay so you can put it
underneath of your bed but today I'm
going to use that for uh create the
friction so I put it on top of my bed so
first I put my bed
here and then I put my back gripper
here and then put the disc
on so that's the setup on the because of
the back gripper so you while you as
sending it it's not moving okay it's not
going to
move that is my setup and let me show
you using my
medium size 12
in Okay the reason why I don't like the
um the disc glued on to the bed is that
usually when it glue down to the bed the
bed create a lot of noising okay so
that's the reason why I don't I'm just
using the back Reaper underneath that
which is it's a it's the same as uh
which is much better more
versatile
okay right and then what I do is just
spray some water onto the diamond
disc and then bring you
pieces water so put some water spray
some water there so it uh the p is not
get CAU into in between the diamond
particles so it's easier for the uh the
clay to go to the side of the disc
okay so unless it's very Co you can use
the coarser disc but this one wasn't
very very rough so I just used that uh
the medium size of disc to send it to gr
it and same thing almost all my pieces
after finish I like to smooth out the
bot so I will go even even it's still
very smooth but I like to make it flat
so it's not rocking on the
table okay
when when it's not enough water just
just use the spray bottle to spray a bit
water on the surface
[Music]
okay
[Music]
right so well I used this um sending
Diamond sing pet is that when the the
center part is a little bit deeper and
you won't be able to make it the whole
piece is flat and you still feel the
inside it's a little rough and that to
just bending on the inside so this is
when that part that is very very hard
for the flat surface to go but the
diamond disc is much better for making
your piece flat so that's why I choose
to use the time this the most and this
is uh can last a very very long time I B
this I believe it's about 20 years years
ago and I'm still using
it and you can see that all the uh the
powder is come go to the edge of the uh
disc um you can just wipe it off to wash
it then wipe it off and keep it dry
sh three different
sizes 8
in 12 in and 14
in that's the finished pieces and will
show
you right so you can see that after
grinding they are staying very flat
without wobbly sitting on my bed okay I
hope this demonstration help you uh to
take care of your pieces at glaze fire
and if you have uh a big trip then you
probably want to use the course or very
rough surface you want to use the cor or
that di me this first to remove the M of
the the glaze and then use the final one
to refine it or you if you are doing the
Kush GL and which is a very running G
and the DI in this is a good choice to
go
with all right hope this demonstration
help and see you in the next video
[Music]
[Music]
