Iveco Daily 2.3 242F97 Particle Filter High Resistance P1206

AutoTuned TV
1 follower
3 Video Views·Jun 12, 2024
Blocked Diesel Particulate Filter Cleaning & Diagnostic Tests
for repair bookings email [email protected]
[Music]
hello s here the so looking at a IV call
Daily okay so this is a 2.3 um it's
having some issues with a
DPF um and it's also got a power loss um
you can see down there that someone's
fitted a new
turbo okay so I have just been currently
going through a little bit for the past
sort of we had a look at this at sort of
9:35 so 20 minutes to go we've got fault
codes for particle filter High
Resistance which is a 242
f97 sorry try and get that so we can see
there what we're looking at um we've got
some short circuits of the light
instrument
cluster error
detected
p206 um particle filter Hy resistance
has been detected and then we've got a
242
f97 again the same sort of description
on the code so what I've done is I've
cleared some of the codes and taken on a
little bit of a test drive just to see
what what actually comes back as a fault
um and of course looking at live data so
if we go back in here now we'll have a
look
again okay so we're in and we're going
to read what fold codes have come back
software restart not exactly sure what
that means but we've got back the
particle filter high value which is that
code so my problem is is is this
software restart whatever that means is
that going to affect um the vehicle
being able to do a regen um but I've
already confirmed that it doesn't
because what I've done is I've reset the
codes reset everything and when I've
taken it around the block I've seen that
the vehicle has tried to do a regen but
then it gave up um because the pressure
is too high and I've also noticed that
we've got a large history ni when we're
driving so we're going to have to have a
look at that he said it it had a new
turbo this is where it gets really
silly the vehicle wi had a loss of power
they had a they had a checked that a
mechanic it had DPF high pressure um
but it had a loss of power so they said
oh the loss of power is not going to
happen over that the DPS blocked because
of the loss of power so they changed the
turbo um sorry customer came and wanted
to have a quick chat but yeah it's uh
it's had a turbo replace because the
power was wasn't there it didn't have
any turbo faults or nothing that
indicated it needed a turbo but they
said because it had power loss they just
assumed it it might have needed a turbo
so they put one on so that was obviously
a waste of money but I can now hear a
large hiss of noise he said the hiss of
noise wasn't there before the turbo was
fitted so of course it sounds like the
person who's fitted the turbo hasn't
fitted it correctly or maybe it's got a
boost leak I honestly haven't checked
that yet so we'll get under there and
and have a look okay so what I'm going
to do is I'm just going to press the Rev
I'm not sure if you can hear
[Music]
but it's definitely got a hiss and noise
down there now this is something else
that he just chucked at me which is the
DPF pressure
pipe you can see there where that was
sitting against the DPF and it melted uh
they did change that
for a new
one okay so we're just driving the
vehicle up on the ramps uh I will tell
you the mileage is 247,000
so I think what I'm going to do first is
hook up a smoke test to the exhaust
because going to see if we can find a
visible leak now I'm not sure if you can
see just up
there so we're looking from this
direction you can see there where that's
been leaking around that clamp so it
hasn't been seated properly there
okay so I've just removed the bolts from
the DPF just so we can get it to move
and try and get this lined up
properly and uh stop this leak that's
coming from there you can see where it's
coming from
there okay so I've now fided all of that
back in I've sort of pushed it up as
best I can it may need a new clamp but
uh let's try that
[Music]
okay okay now I'm going to come back
into the DPF and we'll look at the live
data for the
pressure we'll click all of
these switch ignition on
so 3,000
RPM looks like about
150 it's
increasing that's increasing a lot
the temperature is coming up it's trying
to do a regen
now and back down at idle we're sitting
at sort of 30
m we'll hold the ribs for a minute and
see if the region does any good so this
is probably a pretty rare vehicle that
will actually just do a a regeneration
on the on the spot there we'll just hold
the red for a minute couple of
minutes okay I can see the temperature
there is going a little bit above where
it should be
oh there comes the N
St okay so that is now coming back
down looks like there was a long delay
there before the viscous fan came on so
you can see there when the temperatures
come down from
600° the pressure of the DPF was Hal it
was at 400
Okay so we've ended up around about 165
M and we've still got 30 MS around that
at idle so what does this tell me the
vehicle's done 250,000 Mi it's just done
a regen and the pressure is still
high while the temperature of the DPF
was at 600° we had 400 mbar as the
temperature came down to 200 came down
to sort of
170 so that tells me that the DPF is
damaged really um we can try and put
some cleaner through it but it might not
make some make a difference um I can
probably do it anyway just for the video
sake put the cleaner in and see what the
pressure comes to after the cleaner but
my thoughts on this is that the DPF on
this is damaged because as it's getting
hot the pressure is doubling at least
okay so just here on these Vans we have
the DPF pressure holes so I've
disconnected that and attached up my gun
here for the launch UK DPF cleaning food
we'll get this pushed in
there we go down there to the
DPF that's connected to the compressor
at 130
PSI so you see a lot of steam now coming
from the van so we're back in the
vehicle revs at 3,000 RPM
again just seeing how low down we can
get this
so a good DPF should come down to sort
of 50 50
mbars maybe
60 somewhere between sort of 40 to 60
M it is coming down I'm
surprised so I'm just waiting for this
to come down here at a minute so what
I'm guessing is going to happen with
this is it's going to come down to maybe
somewhere between 60 to 80
M and somewhere between sort of 8 to 12
at idle
which would be not considered a block
block DPF but it's just on the
borderline um and what's going to happen
there is it's it's when you're on that
border line you've only got a certain
amount
of of uh level left until it sort of
gets full again so what's going to keep
happening is it's going to keep regening
and it'll go up to the top again regen
back down but it only comes to here
because of the pressure it's not coming
right down as low as where it should so
with the pressure sitting on the border
line up here it's going to sort of come
about here regen come about here you're
going to get regen every sort of 20 50
km 100 say 100 miles 50 Mi anything like
that so it looks like we're leveled out
around about sort of 67 let me just
creep those revs up
slightly 69
Ms right we're going to let that idle
now let's check it
yeah see we're up around 8 or 9
Ms so even though we've cleaned the DPF
it has come a lot cleaner but it's it's
on the borderline of where it needs to
be
so like I said it is it is clean but
it's it's just about on the border so
you're going to what's going to happen
with this is it's going to regen a
little bit more often so pretty soon
it's going to need a new
DPF um some people say it's possible if
take them off back flush them some of
the the maybe the ash can come out but
what what's going to be happened here is
it's either full of um Ash solids or the
DPF itself
is um Contracting as it gets hot which
is a damaged DPF it's just worn out okay
so now I'm just going to clear the fall
codes and then if you read them you'll
see there there's no dtc's now so that's
it we've done as best we could on that
and I'll see you on on our next video
[Music]
