When to remove and clean your Diesel Particulate filter!

Charley’s Garage
78 followers
In this short video we talk about some of the way you can identify when DPF (diesel particulate filter) needs to be removed and cleaned versus just needing a regen.
#cummins #regeneration #DPF #dieselparticulatefilter #diagnose
#troubleshooting
AI Generated·May contain errors
All right so recently I had to take this diesel particulate filter this DPF right here
and I had to take it over to the dealership and have them do a clean out for me and so I wanted
to make a quick video talking about how do you know when you need to take the DPF off and get
it cleaned versus that it's just not regioning properly. This particular DPF comes off of this
X15 that we have in our lab and you can see that it's on a training aid platform so
a little bit different than what you might encounter on your truck but one of the main
ways to kind of tell is you got to remember that when you regen a diesel particulate filter you're
taking the amount of soot that that DPF has collected and you're using high exhaust heat
to reduce that soot to ash. Now the ash can't go anywhere it's still trapped in that filter so
after a bunch of regions you're going to have ash content that gets really high. Some of the more
modern engines have ash accumulators where if you put a DPF on the truck you reset it and it can
kind of guess at how much ash is in it and let you know that way but the common way to tell is that
the regions will just keep going and going and going because the region stops itself whenever the
sensor says that the restriction in that filter has gotten reduced and since you can no longer
burn ash that restriction doesn't go away and the region just goes on for a very very long time.
Another thing that a truck driver might notice is that he's done a region and then it requests a
region again very shortly after the first region and then you get into engine derates and the engine
shutting down after being on for a little while so that's part of the operation side of it on the
diagnostic side. What you might see on the diagnostic side would be a bunch of fault codes
related to this where we have one a bunch of different ATF or after treatment system fault
codes some of them are related right now currently to the sensors and everything being
taken off of the engine but the one that really stands out is this one right here
the after treatment operator inducement severity at a moderately severe level
that's the code that's going to keep shutting you down and keeping you from being able to region
so ultimately you would want to basically if you looked at your fault codes you'd want to
troubleshoot those of course anything related to the diesel particulate filter before necessarily
taking that filter off and getting it taking it to get cleaned but if your fault code is just about
having a high restriction in the filter despite doing regions then more often than not the
situation is going to call for you to take it in and get it cleaned one of the things I would
recommend not doing is you'll see a lot of youtube videos out there people cleaning out their DPFs
with water hoses and stuff like that do yourself a favor and take it to a shop that has the actual
machine to do it and not rely on that other stuff so thank you guys for watching this is
I know it's short and sweet but just kind of some tips and tricks about how to know when to
clean that DPF
