800. Hand Roll a Handle & Attach to a Chattering Textured Mug with Hsin-Chuen Lin 林新春 馬克杯示範

Hsinchuen Lin
205 followers
5 Video Views·May 19, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
for
for
e
for e
okay
okay I'm showing you how to
use handbuilt handle okay instead of use
a water Port handle and in case if your
hand is not a when you roll the coil is
not even the tip for getting a piece of
a wooden bed and then you just roll it
you will be able to roll it nice and
even and you just use a hand rotor to
roll
it this meod is easier and good way to
if you are not good at a ping the handle
use the water to pull your handle you
can use this method
to get your handle CL very close to the
pulling handle meter
and you can
just make a loop here and let it
dry before I trim I usually prepare my
handle so once I'm finished triming my
handle is closer to the stage and I can
attach it right
away here is one of my Mark I made
yesterday and today it's dry enough for
me to trim and the tip for you if you
want to try your pieces evenly
this is what I did last
night I came back to my studio when I
find out my room is firm I just flip it
over and let it dry for overnight and
now it's very uh close the both the rim
and the
bottom and the ready for me to trim so
that is how I dry my
pieces and people are wondering why I
don't have a holding Cay and I can have
my my pot to hold it right on my bat so
the first thing I was using just water
okay and the water once you you add
water to it and you become when you add
water in between of your rim and the bed
it becomes a slip and the slip is it's
going to grw going to fix your Clay on
the wheel head and the thing for you to
uh be able to do that is first you your
bed has to be nonporous something like
the plastic bag or metal bed
if you have a wooden bat like M9 bat you
won't be able to do it that way so non
PE serice if you want to use just the
water or slip to stick them on
and actually my C
still on the um softer side it's not as
that hard stage as I
expected and if the CL is on the softer
side it's sometimes it's easier to get
The Unwanted chattering make sure you
change the angle you cutting angle
usually people when they holding the
tool they holding more like this way and
this way it is easy to trigger the The
Unwanted chattering trigger the
chattering you can slightly tiled so
when you're cutting the clay you shave
it off okay in instead of a scraping you
scraping it's easy to get I wanted
chattering but if you slight it
tiled it's like you are shaving the clay
off then you probably will be able to
avoid on one the chattering
also you don't need to spin the wheel
your wheel super
fast if you spin too fast sometimes you
also get The Unwanted chattering too
all right speaking of uh unwanted the
chattering or onp purpose chattering now
I want to do uh onp purpose chattering
I will put the chatter Mark
here
for for
all right I'm ready to attach the
handle so first I will scroll right here
use my fingernail
to tap on
it
slip so usually when I'm teaching I tell
my
student for attaching to part score slip
pressure press okay SSP score slip and
pressure so I scrore and I
tap and
slip and pressure when you attaching it
make sure
you squeeze it apply pressure
to both parts
that part already have a the chattering
texture so I
don't scratch I don't score I just apply
pressure to
it get a needle tool and cut the
excessive clay
off Supply a drip of water right by the
joint before
I compress further
okay so this is how I use the coil meor
to make my handle and
then use the rotor to make a
flat and put a a little rigid on in the
center I usually like to have a a
thinner look on the side of my handle so
that's what I did
and the body is a little bit drer than
the handle so I would let it sit for
maybe 10 15 minutes and then I'll come
back and use a needle two or two
smoothing but for now I will just let it
sit I hope this tip helps and I will see
you on my next video
[Music]
[Music]
