793. Trimming/Drilling/Carving a Moon Jar with Hsin-Chuen Lin & Mochi 林新春 修坯紋飾示範

Hsinchuen Lin
205 followers
2 Video Views·Apr 17, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
all right so I'm ready to trim this
piece before I wi up from the base while
this is still sticking on my bed I'm
going to trim the shoulder
first and after that I will wi it up and
then flip over and trim it on the chu
and for the larger surface triming you
can either use the seven shape peir
shape or the D shape this is a little
bit smaller um you can use the pair shap
for larger SCE area
[Music]
and for the um small opening you will
have to turn it on the
chu okay so roughly find in the center
and then I'm going to put my vase upside
down I'm usually get some clay right
here put it on the chu for protecting
the the shoulder that I just trim
so you can put
the some cck coil on
the on the
Chuck and for the clay to stick on the
CH easier you can dip it in the water so
water will your clay a bit better
and I'm using the bubble leveler to
level
[Music]
[Music]
it so either way um sometimes I show
people use uh put the Chuck suck the
Chuck in the water
and uh if you don't have time this is
this is the other way to do it is just
whether you're holding clay and the clay
will stick the on the chop better
[Music]
[Music]
[Music]
is
all right so this is the uh tment for
the small opening V and I you see that I
use multiple tools to trim it actually
you don't have to use so many tool to
trim use either one of it and uh what I
did is just to promo my tools that's why
you see that I keep on changing the
tools and for the inside corner I'm
using my regular number two shape this
is the T carab number
two and also here I'm using this wheel
uh it's from
bth I'm using that to trim and uh it uh
it's quiet and uh it's easy to control
with the
padle usually I don't spin my wheel
super fast so slow speed is very
important for
me and uh when it's un engaged it's very
easy to spin the wheel like
this you will hear the sound that it
release the engage so it's easy to use
the freehand to spin and once it's
engaged it it's harder okay that okay
and then maybe 5 Seconds it release and
it's easy to spin all right and I will
do a bit of a decoration take put put in
some texture here
I'm using the time bless mode to do
that okay for Cle is very easy and
straightforward just pull the splash
plant
apart it was connected with a magnet so
very easy to separate it
[Music]
I'm using the uh plastic glass
the uh information on this dis the
divider to Mark a EOP pass here so I'm
going to use that as a guide to try to
do my decoration so this is very handy
when you need it and also if you want to
get a good uh connection here I also
have
the division here on my aluminum b b
system on the back side of it to if you
want it to use it and
also for all of my uh translucent bed I
have this uh information on that too in
case you need it so you could uh find
the division easier and I'm going to use
wooden drill bits to do my decoration
just through lots of uh
circles I use uh Diamond tips to kind of
push it down to cut so this part here
slightly tent so when I'm making there's
a two circles one from the very tip of
the center and one from the side so that
is the um the detail of my wooden tur
bits going to start with the smaller one
first and also I will use my time La mod
so you will sa time to watch it all of
them when I do the
the decorations
[Music]
[Music]
all right after carefully use the wooden
drill bit to make a lot of circles here
I flip it over and then I use and then
I'm going to use my number 15 the tool
to make just freehand drawing
decorations
so the eso tool it's easier to go with
the clay it's little bit on the drier
side I'm just going to whatever in
between all the circles
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
so this is the finished piece spend a
lot of time doing the decoration maybe
more than 45 minutes 1 hour and that is
the final uh result before
fire and this whe is good for doing the
decoration right on top of the wheel
because when I'm rotating when the
wheels not engag it's very easy to
rotate freely and that is good for doing
all the decoration right on the wheel
head okay so thanks for watching and see
you on my next video
[Music]
[Music]
