784. Using Tombo Sticks to Throw 3 Repeated Noodle Bowls with Hsin-Chuen Lin 林新春 三個碗組拉坯示範

Hsinchuen Lin
205 followers
2 Video Views·Feb 29, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
all right I like to introduce one of my
tools showing how to use the tool to
throw the repeat things usually you have
found someone have some kind of a gauge
put it as side of the wheel and gauge it
but I do it quite differently and uh I
like to use tool to show you how I draw
three repeat size of the noodle bowls
and this three pieces of bowls I weighed
it's around 2 5 pounds and I'm going to
use my tool to show you how to do
that and here is my um You can call a
bottom thickness gauge or it's it's a
hybrid you can use it for also when you
trim in can measure the thickness of
your button and also you can turn this
into soal tumble stick um here is the
tumble stick how they
work so you are going to throw your ball
and measure the depth and then measure
the width okay there's a rouer here and
to hold this imp position you first you
throw your first one and then you
measure the depth and the width and then
you check the depth and the width for
the next one or for the following bows
so that you could make them the same
size um this is how I set it up the o-
in oh I have two a thicker one
go for the
vertical
rouer put it in and then um put this in
and then the other one the thicker one
to
go so the
horizontal rouer can be holded in
position okay like this and then uh the
thinner one you can slide it in for the
horizontal
ruler put it right
here I temporar put it
180
180 and the put here around 90
95 and let's see here if we could throw
uh using the 2.5 lb of uh clay to make a
noodle bow and then we can adjust it by
sliding the the little oring to measure
it okay so let's put this
[Music]
aside okay so for making a bow usually
I'm just using my finger to dig it in
and I'm making the
curve and if you have if you are
struggling making the curve nicely I
have a a few good tool that is helping
you this round rib can use that to
compress
it and you automatically had the very
nice curve on the
inside
or you can use my hybrid
um hybrid rip to you can also use that
to compress a nice
curve and basically you could just use
the finger to to do that okay so when
you start with a nice curve and then you
just follow the and lift the clay from
the
curve pick it up from from my thumb here
since this is not a very uh very big and
thick pieces my initial lifting is just
use the left thumb and the fingers and
pinch and then
lift I'm use my right hand to brace my
thumb so it's more stable and then just
follow the curve and then lift
it
and remove the slip up my fingertip and
then brush inside of the ball
first make sure it is
slippery and I could squeeze the corner
here so I I will be able to use up all
my clay
since I'm going to trim the foot
so
and I don't need the foot to be very
wide so I'm squeezing it
in and brush a little bit of water on
the outside and now I'm going to pinch
it
using initially I was using my left
thumb but now my left thumb is too short
so I'm extending my right thumb and
using my other the fingers okay holding
on the side and just extending my thumb
so that is the position first this and
then this and this hand is holding on
the side of the
wall and
just do the same thing pretending my
right thumb is my left and
then lift
it okay okay so that two PS and I almost
got the right thickness and now all I
need to do is just
slightly adjust the
curve care
carefully and then after that I'm going
to use my
metal rip to smooth the
outside and also get rid of all the
slip and slightly using my inside finger
push the wall
against my
rib okay so that is how I throw my
noodle ball and then before I um smooth
the rim if you have this the ball rib
can use the ball rib to compress
especially the uh from the center to the
uh the the outer part of the foot the
supporting foot the Bas is the clay
right there this part is usually people
has trouble with making it smooth so
this is the how the rib is working to
helping it to compress that
part and slightly hold the tool I'm
using my three fingers here to hold the
round rib and then slightly hold it
tilted you don't hold it too straight
slightly tilted and then slightly
compress from the center to your toward
your right since the wheel is been in
counter
clockwise and you can til
it until you have you see the nice
curve and I can slightly move my rib up
against the the wall and slowly go
up so you can see that each side of the
wall is nicely curved using just this
compressing rib to do that let me wipe
up the
water and you see that the inside curve
is following all the way
through that way you tilted tilt tilted
your rib you can create multiple curve
shallow curve more steep curb shallow
curve if you hold it this way right so
that's how you adjust it and of course I
have a multiple ribs that they all have
a nice curve perfect curve so you can
use that to to do the compressing
too right like this one here you already
have have the curve so all you need to
do is just use that against the wall and
you get a nice
curve okay so that is how I used the rib
and then um if you don't want the the
the the texture from the wood the wood
is not perfectly smooth there's a little
GR in it um if you don't want that you
can use your your metal R to do your
final smoothing and this is how I do
using the rip you I bend it
and hold it more horizontal the better
and start to smooth it little bit away
from the very center
point and
slightly moving my rib all the way
to the
rim
okay so that is how I throw a ball and a
nice nice curve on the inside is very
important because the first impression
when people picking the
ball they just look at the inside of the
bow they will see the inside of the ball
first so that is the first impression so
let me do it again and show you
how I hold my rib
and hold it against
that and move it
up all the way to the
rim and now use the Shamy
to compress the rim and if you want the
rib slightly open up so that it's easier
for you to stack up your balls usually
if you have ball like this this it's
very hard for you to stack it up but you
slight you make it slightly wider so you
can stack up the balls
together and in that case I am
moving the rim slightly
outward so that way you can stack up the
ball so this is will be my first
ball and then I'm I'm going to repeat
the same size like I told you that you
want to
repeat all you need to do is measure the
depth and measure the width and repeat
the same depth and same
width so that you will be able
to repeat it right so I
am
all right so it's roughly like this the
inner part of the ball the very inner
part not outer part of the r okay either
way you can measure outer part of either
inner part so in my case I'm measuring
the inner part about this wi and then
the depth about this about 90 mm okay so
that is the measurement and then my next
one I could throw the inner power like
that I'm use my number 17 to square up
trim of the assessive
clay
all right so my first noodle
bowl I don't usually throw it very very
thin because I want
about the certain thickness to hold the
shape better and the if I want to make
it thinner I can always trim it easily
using the very sharp tool I can trim it
easily right so that is the first
Pole
so I will just fast forwards and you can
see the whole process of three
bowls basically just repeat the same
thing
for
that's
right so I keep on using my measuring to
to measure and now this is about
right the width and the
depth and all I need to do is just clean
up make sure the uh inside is nice and
smooth
for
for
[Music]
for
oh
f
all right so this is the third
one the tool you see I was using is the
um the round rib my 5 in round rip and
then uh when the the H motor I was using
my number four uh my 4 in round RP to
make a a nice perfect curve before I
start to lift
it and also my
hybrid the profile rip and also the B
rip this part here you could have a nice
perfect curve
here and if you want to do the mojob can
use the other
side and for triing the excessive clay
of the corner my number
17 okay tumble stick usually you seen
the tumble stick they come with three
pieces but with my invention here using
the oring to hold it you need need only
two pieces and two functions too one for
uh turn it into a tumble stick or you
can use that to measure the thickness of
the bottom before you trim and when you
are Trim in you can also check if you
got enough dep okay so that is all the
tools I use for this demonstration and
they are available on my square space
shop or ET shop Etsy or square space if
you are living in the US might be
cheaper out of state out of the
California it might get it cheaper from
my square space
shop here is the three finished pieces
of the noodle
bowls okay thanks for watching and see
you next
time
[Music]
[Music]
