WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
Hey guys, how you doing? It's Henry and mowers and blowers
As you guys saw from my last episode working on sketchy to the Chinese 150 CC motor scooter
After I tried to replace the brand new carburetor on there still wouldn't start wouldn't idle right it kind of throttled
okay, but I was having trouble with the
Cone filter. I mean it just just didn't seem like it was working right? You know, maybe I should oil coat it
You know, maybe that would give it less air that would make it cause that would cause it to run correctly
But then after testing most of the day, I was so distraught that I didn't want to work on it anymore
So I just quit, you know, I mean and then overnight. I was listening. I was looking at it last night and
When I tested it and you shut off the engine, right?
You know how sometimes you get like a little bit of extra gas that is unburnt
But then it is still hot or warm in an area and you see like vapors white smoke
It's not smoke, but it's like vapors of gas
how it comes out sometimes in the
Throttle body of the carburetor sometimes. Well, I saw that same smoke
Leaking out of the intake manifold. So I said wait a minute. The intake manifold has to be a really tight seal
Where's that coming from and I took the intake manifold off and look it's cracked
So that was getting extra air in there, which causes the air fuel mixture to be off
See that I think I did this because this wasn't like this in the beginning, you know, which which
which is discouraging because I thought this was the cause but because
It wasn't like that until I put it on like the third time or something
I must have broke it by tightening the bolts too hard, you know
Problem is they don't really
Have this for sale anywhere. So I'm gonna have to try to repair this with like some JB weld or something like that
I don't want to do that. But I mean I really have no choice, you know, I
And this part over here if I put JB weld there
It's not gonna be a good seal because this has to be completely smooth
you know with the gasket, but I guess if I
You know seal here and there and there
Put JB weld there. I mean, what are the choice do I have?
Unless I try to find a lawn tractor intake that matches these holes
Mmm, those rickerts ones looks just like this
but first
you guys know my bullet keychain that I
Took off of the hauler that I sold recently. It's really rusty and corroded. I'm gonna brush that up a little
Yeah, not great
And I dented it. So here's an intake manifold to a typical lawn tractor Briggs
Nikki six or Walbro type carburetor has the o-ring on the inside and the holes match
Perfectly
Now the hole is bigger
Which is more flow which is better
But it also has all this other jazz along with it plastic. So I'm gonna have to slowly
Grind this off
Make this go away
Cut it right there
to approximately the same
distance
Is that so I'd have to cut it like around here?
Because then it'll be longer going backwards going towards the rear
And therefore the cone
Filter may not fit right so it has to be cut right there
Or maybe I'll do it right here and then get like a rubber hose like a radiator hose
Clamp it to the carburetor. At least I'm gonna try it
Here's the original one
Here's the one I made
It's gonna be a little bit pushed back a little bit like quarter of an inch
But I think that'll be alright
hopefully
So now I have one that fits the holes so I don't have to patch this one up
Well, I mean I could just try to find this one for sale. I
Just haven't been able to find it. So I will try this one
Son of a gun. I think it worked
Sounds great!
I think it's idling too high though
Runs fantastic. I am stoked. However, look if I let go of the brakes
It'll just go forward
Set the brakes on
On any throttle
So the idle needs to be adjusted to be lower
And it's hard to do because
The throttle cable is not really adhered onto the carburetor correctly
There's some play
Which is the reason why
I can push this forward and lower the idle a bit
But because the way it is
The way I've adapted and modified it to work
If you just let go
It'll move forward
So I have to work that out
Work that out
Okay guys I dialed it in
Let's get it idle now
Check out the responsiveness
Beautiful
Fantastic
Super stoked
Who would have thought
That I can make my own intake manifold
And have it running like this all of a sudden
Obviously the new carburetor had something to do with it
The new cone filter
Has more flow
Letting more air in
Than the original box
So this is great
I didn't think I would ever get this dialed in
But now it's running great
And I'm super stoked
Even more satisfying
Is making your own intake manifold
After discovering
That the intake manifold was cracked
That little bit of air
Is going to throw off
The air-fuel mixture
In these carburetors
For sure
So now it runs great
I'm just going to put the plastics back on
It idles great
And starts
Just like that
Didn't even have to mess with the fuel mixture this time
I'm not going to touch anything else
It runs great right now
I'm just going to leave it
Super stoked
I'm going to put the seat back on
It's about 4 or 5 volts
I'm going to take another ride
This is a lot harder to balance now though
Because I have a car battery on here
So it's difficult
To lock it
That's why it's a little off centered
I'm just going to go around the block real quick
No helmet, no nothing
Well I'm not going to go on the big roads
After all
This is not insured
Registered or anything
I don't even have plates
Hey Harold
Hi Randy
Oh my god I just got it worked out
And I'm going to go inside now
It's very quiet
I might have to go home
And have a grilled cheese too
That's true
It's really cool
I just wanted to show you guys
It's quiet
It's very quiet
It's cool
I just came to show you guys real quick
I'll see you later
Runs great
Really runs great
It is really heavy though
Hard to balance
Awesome
Absolutely awesome
Stoked
I might still ride it
Again before it gets too cold
So I'm not going to winterize it yet
So I guess the moral of the story is
As long as you have the tools
And a little bit of ingenuity
Getting parts for
Something like that
Which is
There's pretty much no brand name at all
I have no idea who makes it
Well you know who makes it but there's no brand
All you know is it's a
GYC type engine
Chinese scooters
And
Obviously trying to find the carburetor for it
Didn't work out
They're all the one that I bought
And obviously it doesn't really work right
But making your own
Fabricating your own intake manifold
With a lawn tractor one
Was pretty cool
I guess I thought it might work
I'm just surprised it works so well and so quickly
And then dialing it in
After you did that
That scooter runs great
I'm not going to winterize it yet
I might go for another ride
Hope you guys enjoyed the video
We'll see you guys next time
On Motors & Blowers
See you guys next time
On Motors & Blowers