WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
here at mowers and blowers we push them into the garage but they come out driving
hey guys how you doing it's henry at mowers and blowers welcome to another episode today i'm going
to be getting my last tractor running hopefully everything in my backyard runs and this is next
everything here runs except for this one my buddy nick from belfort gave it to me last year it's
just a carcass it has no engine in it i took the deck and i used it for this one so it's going to
be a hauler but nevertheless i have three spare engines i want to put one of them in there so at
least it gets the engine out of my garage for more space and we'll have a tractor that runs
but all tires are flats been sitting there for like a year the only other thing that doesn't
run is this thing that i got from my friend frank the ups guy it's kind of a cool husqvarna
more modern type single stage snowblower but here in long island doesn't really snow anymore
so snowblowers are not worth much at all nevertheless it doesn't run i want to get
it running that way i feel better so i'm gonna pull this out pull that out
manually drag that out of there put air into tires
surprisingly the tires weren't even that bad this steers really well this is solid
no rattling or anything it's a solid tractor man it's the old style you can tell by the shift in
between the legs kind it is a manual has a decent seat actually no battery
big 20s in the back that hold air i do have that headlight lens
i have to repair the hood the hinge it'll be tough because i don't think i have another hinge
what else is interesting is this has a horn in it and a tachometer
no ignition switch though i'm gonna roll this to the front rolls really well
so this is the oldest engine that i have of the three spare engines that i rebuilt i did
test this and it does go vroom however look at this muffler how's that gonna fit in here i'll try it
i gotta make sure i find some bolts that fit the engine mounting
okay a break in the action uh i've been working on this for quite a while because uh
when i put the engine on i noticed that the wiring harness was this gobbledygook of spaghetti
and the guy had just disconnected everything there's no ignition switch module uh there's a
push button here i did figure out with my uh multimeter which wire goes where and now when you
press it so solenoid seems to work push button does work but i don't think it's getting current
to um the ignition which means that there's probably going to be no spark so
i gotta work it out i did find the original harness
to the ignition switch but i need to find an ignition switch also i'm looking for a muffler
because when i try to start this we're gonna all go deaf i've been trying different mufflers
got a couple of double stack pulleys ready found a gas tank because all that stuff was missing
remove the horn and there's just a lot of stuff going on over here that i don't think it's going
get sparked because i don't know what he did i may have to get another ignition harness and just
completely rewire it to stock like but i kind of like the push button though so that's what i'm
doing now all right i think i got the wiring done i found this old uh ignition switch but it was
the wrong prongs and the wrong harness so i had to take the wires out of the harness and coincide
them with the s for solenoid m for magneto b for battery g for ground and the other stuff was just
insignificant look got a switch here it doesn't really fit the holes but i'll have to make it fit
so the switch starts and now the push button is the horn got a push button horn this ignition switch
it's great uh i still don't know whether or not we're going to get spark yet because i'm not sure
if ignition is going to it you know what i mean power is going to it uh magneto kill wire is
connected so if it doesn't start later when we try it i'll disconnect the magneto and see
i'm going to figure out the muffler now okay i secured a muffler
put the gas tank on i'm gonna put some gas in it and see if it fires up
i don't have high confidence because the wiring thing is just a nightmare you know what i mean
so i just don't think so but one could hope probably gonna leak gas i have a fuel filter
look where the fuel line is connected to in the breather what the hell i've never seen that before
well i guess i'll connect it to the carburetor and see what happens
all right so when i pulled it off off of that it was shooting out gas into the breather
now i connected it to the carburetor and amazingly it's not leaking all right guys
let's see if it starts oh i didn't do the throttle you've never done the throttle before
i guess i'll show you loosen this nut it's kind of clamping it here's the throttle right
put it the choke stick this z-bend into this hole on the throttle bracket the plastic thing
pull it all the way back until this pushes that choke linkage forward stops
use your finger push it backwards there you go i checked the oil oil
it's choked oh boy now it's hydrolocked because all the fuel has poured into the crankcase
so i took the spark plug out it should be because that fuel line was going right to the breather
which i still don't understand why the crankcase was being filled with gas mixed with the oil
so that's why there's like a ton of oil gas in there so i'm just going to blow it out
ready it's gonna shoot out
all right well that was quite a lot but will there be more
all right good so that seems like it cleared it out and we should get spark now hopefully
all right we cleared it i'd really like for it to start now i mean i want to see if it even goes
because you want to see if it has spark here we go so what happened there was
yeah this is all gas right i'm happy that it started up i'm happy that it ramped up
and continued to run but then i felt like it just seized itself oh okay that's good
okay so the carburetor is dirty because it only runs on choke so that's expected because i just
took that carburetor out of the 50 that i had in the bin just threw it on there i didn't clean it
or anything or check it so that's great we're getting spark the engine does shut off with the
switch with all that spaghetti stuff that i just uh worked out um we're probably gonna have to do
an oil change because now that oil is contaminated with gas so therefore the oil is now the lubricity
has thinned therefore not protecting the moving parts of the engine internally but i am dead so
i'm gonna come back tomorrow we're making big progress all right a break in the action somebody
texted me on facebook marketplace they want to buy the home light backpacker leaf blower that i
picked off the street near my neighborhood i listed it for 50 bucks let's see if we sell for 50 bucks
nice lady uh just bought a house needs a backpack blower she's never had one before i showed her how
to use it she's like that's it i'm like that's it she goes great fifty dollars and i just picked
this off the street the other day uh it did take a little bit to fix it things were just happening
to it after i fixed one thing something else was you know uh the fuel lines just disintegrated
once it hit uh fuel for the first time in like five years but like i said it's basically just
finding fifty dollars on the street y'all could do that too good morning it's the next day today
we're going to replace the carburetor because this only ran on choke also i'm going to drain
the oil right now and put some fresh oil in it because it's been contaminated by the gas
one of the 50 carburetors i found in a pile of carburetors seems to be okay you blow in
and you can blow flip it upside down and you shouldn't be able to blow
and you can't that's an indication that this carburetor is pretty good even though it doesn't
look too clean i think it'll probably work also i did some research on this oil breather
and why it has an extra nozzle see that nozzle sticking out there's the vent that goes into the
carburetor right so what's that so i found out that this is actually a breather that has the
fuel pump pulse option so it's got crankcase pressure and pulse coming out of that nozzle
therefore if you had a fuel pump on here this is the pulse to the crankcase that allows for
your fuel pump to work so we're going to try the drain oil now as you can see from this reservoir
it has a thing that's pointed that way well if you loosen this nut over here the oil will come
out of here and make a complete mess so i've got this make a funnel thing that should divert the
gas and oil mixture go in there like clockwork yep definitely a gas oil mix the oil is very thin
quarts of oil back in there switch the carburetor out to another one
i zipped off the valve off the solenoid because it just causes problems i never liked it
and also i looked up the uh breather for the pulse this one here with the extra nozzle
i looked it up and a new one cost 80 bucks on ebay used ones go for 40. so i took this one
off and i had an extra regular one that didn't have the nozzle on so i put that on
and i'll sell this on ebay for 40. like i said i changed the fuel line here to a curved one because
the other carburetor had a curved uh input like that this one had a straight one so you need a
curved hose so i got a curved hose but it didn't reach so i put a fuel shut off on there so it
now this is too long that's what she said anyway so i've got a new carburetor on here
new meaning not the other one we drain the contaminated uh oil with the gas mix put new
oil in it got a little bit more gas in there
and now i'm gonna have the camera in the garage so it's not gonna overheat
shutoff is on it's got no gas in it now there should be gas trickle trickle trickle
something's wrong with the governor so i think that when i assembled this uh engine when i put
the sump cover on the governor fell off not fell off but moved so that that little pointy thing is
not touching the actual lever because look there's no spring tension at all this is just
free flowing see what i'm saying it's supposed to be under some uh tension from the lever inside
onto the governor gear and there is no tension so that's why it's just free flowing you know
what i mean see that there's no spring tension at all you can just put this this way and it'll
stay there it's supposed to bounce back you know so i think that when i put the cover on
the governor moved like half an inch and is not touching the lever so it's a floating governor
inside so that would mean removing the entire engine also when i changed the breather the gasket
must have broke and so it leaks a little bit on the bottom but i might have to remove this engine
put another one on because i don't think it'll work correctly with that governor floating around
in there not gonna work damn it this is the most recent one that i built same engine pretty much
14 horsepower same exact setup but if you look at the governor look pops back this has tension
on the governor on the lever internally so i'm just gonna swap this one onto that one
and voila just like that well not just like that just like that switched it out i thought for a
second that the starter motor was bad on this because it wouldn't crank uh and then i realized
that i didn't put the mounting bolts in for the ground then i had to switch it back again
and here we go it's got gas in it i just put oil in it i was about to run it without oil but i checked
now there's oil in it and uh oh i didn't put the muffler on so it'll be louder than hell
uh and it also surges a lot as you can tell so it needs some carburetor adjustment
that is loud man gotta put the muffler on and figure out the ground but it seems to run okay
just need to adjust the carburetor so do you know why it didn't shut off it's because the
wiring harness wasn't plugged in so i just plugged it in put the muffler exhaust pipe on
so as you can see still surges even after taking out the fuel adjustment screw
cleaning it which means the carburetor is dirty the jets are clogged
maybe i'll just change out another carburetor it sounds i mean it's running good and all that
cleaned a couple carburetors but i just put this one on let's just see what happens if not i cleaned
the walbro one you know i'm getting a little tired of this tractor hasn't been an easy fix
all right i put the walbro on it's leaking a little i'm about to quit so this walbro carburetor
has a fuel adjustment screw as well as a pilot jet screw and that pilot jet screw is a little warped
so just loosening it up a little bit on the tension caused it not to surge meaning it was
allowing more fuel to go through therefore it wasn't starving i need more fuel i need more fuel
adjusting that caused it to be oh i'm getting enough fuel now so now it's smooth finally
only after four carburetors so i found like a really good double stack pulley
like a new bolt i don't have too many of these okay i got the double stack pulley on for the
drive also put the air cleaner box back on here again you know i got this old hood that i've had
for seven years it's the square one but it has the bracket on it whereas the original one
bracket was broken it's at least green dark green not burgundy let's go for a ride
maybe not yet oh i was feeling around with my hands having it on its side all the oil
spilled into the carburetor came out here i quit for the day
looks like you're bringing me another thing
yeah i'll check it out for you
good morning it's day three do you think it would take me three days to finish this
sometimes that just happens so tilting this on its left side side of the carburetor was no good
a lot of oil leaked out through the carburetor because the valves were probably open when your
crankshaft is in the position where the valves are open so all the oil not all of it but most
the oil spilled out it's a mess i'm gonna flip this to the right because i want to show you
something so what's unusual about this is check out the distance between the tensioner pulley
and the crankshaft okay so when i put the double stack pulley on the drive pulley was up here
right and that's why the belt came off it's because this is not aligned with it i need to
get a double stack pulley that has a tube that goes up to here so that this top part is where the
frame is and this pulley will align perfectly in line with this pulley so we're talking like
one two inches this part here has to be two inches like that so since we're not using the
mower deck pulley i was thinking that i'm gonna cut it two inches right there because this part
here has the key in it you need the key otherwise it'll just spin and not grip i'm gonna cut it here
and put this in upside down because all i need is that pulley so i'm just gonna cut it like that
but i'm gonna find another pulley that's not so new okay never mind the cutting i found one that
has a keyway that stops there see stops there so basically it has a little step over here that
prevents the crankshaft from moving anywhere any more lower than that however if you look at it
it's still kind of misaligned this pulley is like half an inch lower which could cause the belt to
slip off so this is bent downwards this arm so i'm gonna bang this up so that it's
level with this it's just a tractor fellas an old tractor like tarrell says it's not the space shuttle
now it's kind of crooked you said it's not the space shuttle
shut up there we go now it's level levels
yeah much better now will it run from all that oil in the carburetor
hopefully the gas will dilute and blow it out should smoke a lot
hydro-locked again with oil this time it never ends fellas this is gonna be like a three hour
video because i literally have like three hours of video now i'm gonna have to cut that down to
like 50 minutes you guys think making videos is easy
can you believe it after all that transmission is in gear wheels are not spinning
after all that the transmission's bad can you believe that
can you believe all that work to get this going and the transmission's bad
yeah driving around another free tractor well the mowers and blowers rebuilt engine
yeah it's a little smoky i'm not sure if it's because i tipped it on its side for so long or
maybe the rings aren't too good well we got her going it's moving just needed a couple of keyways
i didn't take them out hope you guys enjoyed this video and by the way 71% of you guys were
not subscribed but since i started talking about it now only 66% is now subscribed nice job check
down there make sure you're subscribed to this channel if you enjoy watching small engine content
hope you guys have a great day we'll see you guys next time on mowers and blowers
see you guys next time on mowers and blowers