In this step-by-step DIY guide, we will show you how to create a mesmerizing laser-cut lantern box using MakerCase.com, Lightburn and the xTool P2 Desktop Laser. If you're passionate about crafting and looking to add a unique touch to your decor, this project is perfect for you! Follow along as we take you through the process of designing, cutting, assembling, and illuminating your very own lantern box. From selecting the right materials to mastering the laser-cutting technique, we'll cover everything you need to know to bring this stunning piece to life. Get ready to impress your friends and family with your artistic skills while enjoying the cozy ambiance that this laser-cut lantern box will provide. Let's dive into this creative adventure together!
To make your lantern box truly exceptional, we'll share some exciting customization ideas including intricate patterns, personalized engravings, and color choices. Plus, we'll also provide tips on choosing the perfect lighting option to enhance the overall aesthetic of your creation. Along the way, we'll share useful tricks and troubleshooting solutions that will empower you to overcome any challenges you may encounter.
So, grab your creative hat and join us in this DIY adventure to craft a laser-cut lantern box. Let your imagination out of the box as you learn new skills and create a stunning piece of functional art. With our expert guidance, you'll gain the confidence to embark on your own creative projects using laser cutting techniques. Get ready to impress everyone with your craftsmanship and bring a warm glow into your surroundings. Don't miss out on this incredible opportunity – watch our step-by-step guide now!
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
like a basketball
What is up a welcome back do it to do it build it or make it
So do we and we have new videos each week every Tuesday and Friday
If I had a nickel for every time somebody asked us, how do you make a laser cut box? I would have exactly
25 cents
But how easy are they
Step one, we're gonna gather all of our supplies
You can use anything to make one of these little boxes with we have acrylic
We have some eighth-inch plywood
Some quarter-inch plywood, I think yeah
Yeah, of course. We have quarter-inch MDF. That's our go-to
So, I mean you can make it out of anything, but whatever you pick you got to be able to measure it with some calipers
So what are we doing it out of babe?
I want to do it out of the the like wood green over here this
Birch this birch. All right, just gonna use the calipers to check the actual
Measurement lots of millimeters. Hold on. All right, so this is actually
point one two four
Great now we know
Step two, we're gonna go make our box
We're going to start making our box here at maker case comm
This is a free website where you can make different types of boxes. You can see up here just a few options
We're gonna do a simple box today. And then I want this one to be tall and skinny
So I'm gonna do it four and a half by eight
The depth is also going to be four and a half. I
Want an image on the outside?
So I'm going to make these the inside dimension so I'll know I have enough room on the outside for the pattern
I want to cut out here
Material thickness. So this is why we use the calipers. We're gonna put in our custom thickness, which was
point
one two four
all right, and
We're going to do a closed box and then we are going to do so what you're seeing here are
The flat
Joke edge joints. We're gonna do the finger edge joints. This is kind of what we demoed in the beginning
Well that way it's a whole lot easier to put together. I don't have to try to line them up and glue it and
Then you can see you can change the side
Size of your image and move it all around
Right now it is at about an inch for the finger joint. That seems that looks about right to me, right?
Okay, we're gonna leave it at an inch and say download box plans that looks great
We do not need the panel labels. We're gonna disable those. I'll just guess
Figure it out
Gonna get crazy with it. We do not need to change the line formatting
We're gonna leave the colors as is the width line as is and we do not need to change the kerf
We're gonna do
Zero or none for cut composition type and now we're just gonna download SVG
Now we're gonna take this over to
Light burn, but before we do I'm gonna go get a pattern right? Yeah, you want to get a wrapping pattern now
All right. So let's start here in Canva our last couple of videos
We've really shown you some of the cool things that Canva can do
We're gonna show you something new in this video. First of all, did anyone see this?
I love this trail and the stars. I really am just so trippy. I'm so distracted by it. I love it
All right, we are gonna stick with the 18 by 24 poster. I love a poster. Do I made it vertical?
I don't think it matters
we're gonna go to our elements and then we're gonna type in
Laser cut in all caps. That's right. Yell at it
Here this is what I'm looking for these panels right here. So if I click on one
Magic recommendation says hey, I have lots of these if you want to choose from these
Look at all of these great patterns that you could put right on the side of your box
And I think I mean, I guess I'm just gonna stick with the one that's here. I like that
Yeah, I mean, it's already looking
What size am I working with?
Position
Five by nine. It's a little big but I can adjust it after I download it. Alright, so from here, we're gonna click share and
We're going to download
I'm gonna download it as an SVG the little crown shows that you have to have the pro account
But definitely the pro account is worth it
We're gonna keep it with a transparent background and click download
All right. Now we're gonna go over to light burn and
Import the two things we just created so up here on our toolbar. This is the import icon
I'm gonna go to my downloads and I'm gonna download the box one that I just did
Here I can
Right click and I'm gonna ungroup these
They're already grouped
They're already groupies, yeah, they're already a bunch of groupies. Oh, I got those pretty darn tight
All right, so these are not gonna fit on one board the tops and the bottoms
But we can go ahead and do our thing with them before
Before we get out of here. All right, and now I need to import my image
It's my design
This is also grouped
so
The thing about this is right now I can make this a little smaller
So that it fits on here
Is that too big should I give it just a little more room?
2-5 maybe I do
Flat for
Okay, all right, I like that now
The thing I can see here is that this image has a square frame on the outside
So if I cut it as is then the whole middle is just going to be cut out
so I need to
right click and ungroup this and then I want to take this outside frame and
Delete that now the image will be cut out of the panel
But I need to go back and group it all again
ctrl G
now I can
ctrl D
Will duplicate it holding my shift key. I want to drag it to the next panel
ctrl D duplicate
shift and drag
ctrl D
shift and drag
And now I'm going to Center each one of these on their panel by using this bullseye up here align both vertical
and horizontal centers
So that's good
That's good. That's good
this one
All right. Do you think that's a little close to the edge?
You're about to lose control
I'm about to lose control by falling off the edge
All right
so the other thing I want to do with this box like we showed you with the jack-o'-lanterns in the beginning is that I'm gonna
Make a lid and a base for it and it's and it could be
Here you can see that maker case has created us a lid that's gonna fit down and be flush with the top and the bottom
But I want them to have the top and the bottom to have a lip on the outside
Just get a little lippy kind of get a little lippy. All right, so I'm gonna create a
Box here. I'm gonna hold shift and draw my box
well
Let me go back to my arrow and it needs to come around
the lid here
And what am I at four seven five so I want this one to be
Five and a half. I guess it's about right, huh?
probably five
A whole half inch you want a quarter inch all the way around
Well, that's a half inch all the way. I think being that tall
It's gonna need a little a little something needs to look like it's definitely wearing a hat at that tall
And you want a whole half inch so once you divide it around the edges it'll actually be
Quarter inch all the way around. No, it's gonna be a half on either side and a half on the top of the bottom. I
Think we'll see. We'll see how half inches. I mean we can always adjust it
So I need to center these
Now the next thing I'm gonna do is duplicate this
And I'm gonna make it the same size as the box cool on the inside, right?
Yeah, so grab the measurements of it, which is
Okay, control C
Go to this box
control V
Now align the two of them. You want to align the big box in the small box
That the two inside boxes. That's right. Just the big box and one small box. You just made
Align these two. Yeah. Oh perfect now minus
Now I'm gonna cut this out of the big box, right? Yeah, so mine is front
Now I've got
Now it's basically a frame a square frame with an open inside
And then I have this one and I need to merge all these together
Okay. So what he's saying is now
We need to make this part of that so I've got to grab all of them
Give it a bullseye first bullying Union, right? Oh
Yep
Okay
I think I did
How about this one? Yeah, well doll
Nope, that's not what I want
Well, let me make sure I cut see it's important to yeah that minus front
What's that?
Minus the you gotta grab the big box. Yeah, then the small box
Okay now minus
There you go
Now it should be over is it because I didn't select them in the proper order. Yes
The second gets subtracted from the first. Yes, the second one selected gets subtracted from the first
All right, so if I go back and now and do bullying Union, that's what you're okay. Yeah, there we go. There we go
Okay. So what we did here is now these finger joints that will be sticking up from the top of this
will fit down inside
the
Openings that we just created for the lid and we're gonna just copy and paste this for the base, right?
I don't need this one. Yeah
Yeah
All right, just control genes is already one thing right? Yeah, it should be all one
So control do you duplicate I think just turn everything right?
Control a select everything and put it all on. Oh to the red layer the cut layer
Step three, we're gonna make all of our cuts
We're gonna bring this piece of scrap over to the X tool p2 and we'll cut it out
But first we're gonna stop back in the light burn and update our cut settings
Now we're gonna make our settings our cut settings here
So we're gonna for the p2 that you can see is connected down here
We're gonna use
25 millimeters per second at a hundred percent power
Next we're gonna select everything we want cut. I'm gonna drag from the bottom right to the top left
This is everything we're gonna cut this
first pass and click start
All of our little pieces are cut now, I don't know if you noticed in the first clip
We had do they cut through properly these two line up perfectly
This one does not that one's it was thinking outside the box
So we use the blade bed, which is great because all the little pieces will drop to the bottom
I could just dump them out
But the downside of that is some of these are kind of long so what happened is it partially dropped down?
But left a little piece of it sticking up and the laser head caught it and dragged the whole board
So we're gonna swap out the blade bed for the honeycomb bed
And now everything will lay perfectly flat and nothing will catch the laser head. You got to kind of keep an eye on that
Step four
Assembly we're just gonna snap this thing together. It's like a puzzle now. It's got all these little tabs
We'll just start with the bottom I guess
Yeah, oh
So this is the wrong one. You got to make sure you line them up all the finger joints line up
I think it's this time. Oh, I still don't even have the right
No, that's ugly side out that's ugly side out
Throw the top on
Start with a pink one. You just do everything together. It's so fun when we just do it all together
Let's get a corner on the bottom fits so easy. There we go. There we go
Okay
So easy it was so easy
You can glue it not glue it you can screw it you can slap it up flip it and rub it down
You can stain it not stain it paint it spray paint it. There's so many ideas
Alright, well for real for ideas, I wanted to share that you can make this even smaller
There's so many different things that you can do with these
You can use these as the jack-o'-lanterns like we started with or in this case
This is a nice lantern or it could be a serving column
You can have a party and maybe put serving trays on there. There are so many different things
You can do pizza
you can make it smaller and actually put a cut a little hole out of the inside and then another little frame and
Actually make it like a pencil holder or you could give some candy canes and a little pencil holder
So there's just so many different things that you can do with a box rather than you know
Maybe it has a lid. Maybe it doesn't have a lid has a lip. It doesn't have a lip
So there it is really easy to do there are so many things that you can actually do with this box
Technology. What are you going to make with a box or what have you made?
There's just so many different types of things. I wanted you to think outside the box
Yeah, let us know down below big. Thanks to all of our patrons
We love you guys a little hanger fan a little hanger fam
So we have a bunch of good stuff happening over on patreon. We have
Illustrator techniques we have light burn techniques. We even have a little bit of artificial intelligence
Techniques over there a little class last night. So we are about out of time
So if you're not gonna join us for the patron after show or Kim it Garrett after dark is what I like to call it
We will see you on Tuesday where we'll do it build it and make it again. And again, we'll see you next Friday, too
I'm just gonna go right for the middle balance
Who should I spin it?
You