Forces inside of a slackline block and tackle pulley. Does a 5:1 distribute the load evenly?

HowNOT2
100 followers
3 Video Views·Feb 27, 2019
Watch the differences in the dynamometers when we embed them into a slackline pulley system. If you think of other fun slack science experiments we can do, leave a comment or if you want to make an episode that we share on this channel, message me on my personal fb page and we can collaborate.
Find slackliners near you at https://www.hownot2.com/slacklinegroups/
Thank you to my Patreon supporters who donate $1 per episode at https://www.patreon.com/howNOTtoHighline
Do you want to see where all the force is being applied in a pulley system?
I've got five dynamometers and a pulley. Check it out on this episode of How Not to Highline.
Hi I'm Ryan Jinks and welcome to the park. We have a pulley system with some three inch SMC pulleys
and a 60 meter rope in here so I can really play with some dynamometers and see what force each
strand the break and the fixed point over there all see when we tension the pulley system when
we slackline. Okay our master point here is one kilonewton. Our fixed point that just is fixed
here is 0.25 and that's quite interesting considering there are five lines here. You
We are still at one. You can see here how I isolated the force with two overhand knots
to show the force of this line. This is also seeing about technically one-fifth like it's
supposed to and this one is so 0.18, 0.17, and 0.22. So they're not exactly even. That's actually
kind of a big difference percentage-wise and then over here we have the the break is a
gree-gree plus and it's 0.17 and that's connected to there. Okay we're at three and a half
kilonewtons. Go ahead ask me how I tensioned this. No it was not with this because I have the damn
dynamometers in the system. So I used another pulley system to get the tension I wanted.
Anyways at three and a half kilonewtons we have 0.73 kilonewtons on our fixed point.
One of our legs is seeing 0.67 and over here on this side we have 0.67 as well and on our
gree-gree we have 0.58. So each leg of the five legs is holding anywhere from 17 to 21 percent
of our master point and what's interesting is this fixed point is seeing the 21 percent whereas
the gree-gree over here which is the last part of the system is seeing only 17 percent of the
master point and it is the last in line before the tail of the rope and I would account maybe
for friction for that is maybe why. You can see it's 0.2 kilonewtons different over here regardless
of how much the master point is this has always seen less force. So the theory says five legs
should hold 20 percent evenly of whatever the master point is and we learned the further along
you go in the system with friction the less force it's holding so it starts at 21 percent which might
be accommodating for the fact that less is over here maybe and then by the time you get to the
gree-gree or the break it is holding only 17 percent in the situation we have here which is
mostly frictionless considering these are smc three inch pulleys but if you're tensioning your
lines with three inch smc pulleys you're probably getting your slack lines pretty tight and you
could get hurt therefore you shouldn't slack line. Hey thanks for watching but don't be an idiot and
make a cluster of gear like I have here without going with someone who knows what they're doing
slackademics.com in the group section has over 1300 facebook groups that you could find a slack
near you to play with gear in the park and learn from somebody in person check out our other videos
as we have highline rigging examples break tests lots of slack science stuff like this and some
funny videos check it out on how not to highline on youtube or facebook and be sure to like follow
or subscribe whatever platform you are on. Cheers!
