Welcome to the original reason I started this channel… Highlining 101 or “How to use a highline that is already set up.” This is 80 short videos squished into 6 categories and 7 videos. You can skip along in the chapters in the timeline or watch the whole thing. If you are a pro, we recommend you share this series with new highliners before you take them out for their first adventure. This also would be great if festivals recommended this to anyone arriving that might have never done it before.
We overkilled this project, but it turned out great. We had a lot of great help because we wanted to make sure we included everything and didn’t miss important stuff. We may make a followup 8th video and update the textbook from the feedback you give us. Thank you to Dan Walsh from https://slackline.us/, Daniel Ristow, Rocco Fucetola, Cam Peters, Aaron Free, Kyle Lovett, Nick McPherson, Cristiana Rodrigue, João Portales, Leonard Ferrari for all the help!!!
➜➜➜Chapters for this video: Using your Gear 00:00 Introduction 01:36 Know your gear 02:59 Know your harness Ryan 04:50 Know your harness Kyle 06:25 Know your harness Cam 06:39 Tie in points 09:49 Tying in 11:44 Leash Length 13:32 Where to put your line slide 14:41 Attaching your line slide 16:24 Detaching your line slide 17:20 Using Hats 19:28 Using Buffs 20:09 Be Colorful 24:34 Music Management 26:58 Ending
How do you use the gear that you're going to have when you get on a Highline that's already rigged
your first time? This is part four of a seven-part video series that corresponds to our Highlining 101
book on slackline.com on how to use a Highline that's already rigged. Now, we go into depth on
how to use all the gear that you're going to have in here. In the other first video, we show you
what gear to buy. Every video we cover is about the same stuff, but we look at it from a different
angle. The last video was about safety, and it talks about all the gear we're going to talk about
now, but the safety aspect. Now, if you already know how to Highline, please kind of scan through
the video, see if you like it, and please share it with somebody who is new, so they are more
prepared when they go out the first time. And if you're new, welcome to the slackline community.
Please enjoy this comment. We hope this helps you a lot. This is my new studio and lab, and you will
see my old studio and my old house in these videos, because we did this over a long period of time,
a while back ago. This was in some tucked away, obscure YouTube thing, broken out into 80 videos,
and kind of obnoxious. And now, it's on the main channel, and in the timeline below, you can see
it all broken up into chapters, and in the description, so you can skip to the part that
you want to see, or if you're new, just watch it through its entirety. We hope you enjoy it,
and please leave some comments below on what you think, and we could potentially make an eighth
video to supplement everybody's comments on these seven. Enjoy. Do you know your gear? Your gear
has been tested, and you may have played with it at home, but I really want to just emphasize one
last time that you really, really understand your gear. I know we've covered this a lot,
but you want to make sure you understand your harness, and you need to understand how your
These twist gates here are three ways. You have to lift up, then twist, then open. You should know
everything about your gear when you're completely stressed out. You're not going to be in your
living room playing with it, looking at it, and staring at it. You're going to be for dear life
hanging on, trying to figure this out, and you're going to be like, you'll look, you really will
look like this, probably. It's kind of fun to watch, and you'll be like, you really need to
before you try to do this up high. It's the whole point of sit starting. Great, you can sit start,
but you need to be able to do it when you're super stressed out. So really, really take the
time to go behind your back, figure this out, do it upside down, just practice, practice, practice
one-handed all the time. Play with it, play with it while you're driving. No, play with it while
other people are driving. Just really, really take the time to understand your gear before,
before you go highlining. It's important to know your harness since it is what holds you to the
highline, and if this isn't right, it doesn't matter how good, your highline is rigged. My
harness is an auto-locking harness. This is the most important thing you need to know,
is whether or not your harness is auto-locking. All I do is pull this one side, and then I'm done.
Whereas a double-backed harness goes back through, and if you don't do that, it comes undone. So this
can be very confusing, especially if you borrow somebody's harness, and they have a double-backed
harness, and that's a common risk. So mine is auto-locking. My leg loops are auto-locking.
When you get your harness, you should look at the instruction manual, understand how all of
it works. In this case, I can take this out, which it has this sewn end on the end there,
so it's hard to come out of the first buckle, but it does come out, which is a little unnerving with
auto-locking, but you want to be able to pull the whole thing apart and put it back together.
Sometimes these little supports that hold up the leg loops can come unclipped, and that's not a
big deal. This is just holding up your leg loops. It's more about a comfort thing than anything else.
That's why they're so flimsy, but you want to know that little, how that hook goes on there.
You want to know that your gear loops are not load-bearing, so you're not clipping vital things
to your loops, whereas some harnesses actually do have load-bearing gear loops, which I don't
think is necessary. So take the time at home before you go out to a Highline to fully understand
your harness and how it keeps you safe. There. Now I can go Highline. My harness is a little
bit different. So here, I actually have two buckles, and they're both double-back buckles.
My leg loops are also double-backed. You can tell on most harnesses that are double-backed
that they are double-backed because when it's open, it says danger, and you never want to see
that sign that says danger when you're about to go Highline. Another cool trick with double-back
buckles to know is that if this is an O, if you can see the whole buckle as an O, it stands for
open, and if you bring it back through and double it back, then you can see that it's a C for closed.
The reason this looks so bulky and it has these features is because it is a big wall harness.
My harness specifically has two belay loops embedded within each other for redundancy. Belay
loops are one of the weakest points on harnesses, so it's nice to have two of them. When you Highline,
it's nice to feel like you have nothing on. I'm not like that. I like to use this big hefty harness.
It's really cushiony. It's fun to sit in. It's nice and comfy. This has two belay loops. I wish
that every harness had two belay loops, but this is one of the only ones that does. It definitely
feels safer having redundancy in your harness. This is my harness. It's slightly different
because it has an auto-locking feature on the belt, whereas the legs are doubled back. This
is why it's important to look at your harness and actually know what you're getting into before
actually using it in the field. Where do you tie in to your harness? This is called the belay loop,
and it is to, you guessed it, belay. If you're going to use a carabiner to use a belay device
to either repel or belay or whatever, it's best to stick it on your belay loop because it pulls
on both your leg loops and your waist belt evenly. If you take this carabiner and clip it to your
leg loops and your belt loop, it doesn't necessarily pull evenly on your harness.
It can tri-load this carabiner, pulling it in multiple directions and making the carabiner
significantly weaker. This, I've seen people trying to avoid the belay loop as if it's a
dangerous thing, and it's actually a pretty strong thing. It is rated between 15 and 20
kilonewtons, and we do brake tests on SlackSnap for that. This is not how you do this. However,
it is where you tie in. It adds a layer of redundancy because you have independently
bypassed a single point of failure. Your belay loop doesn't need to fail
if you're tied in. You don't want to tie into the belay loop because it also puts your knot
further away. It adds wear and tear, unnecessary wear and tear, with the...
Oh, my leash just fell off. Wear and tear with your rope running over a single belay point.
It's also why I don't recommend putting a daisy chain directly through your belay loop, even
though it's not the end of the world. But in 2006, a famous climber named Todd Skinner died
because he used his belay loop, like I have right here, too much, and it wore it out. Ironically,
I was there that week when that happened. My first big wall, I came home and someone died.
I thought big walling was extremely dangerous when I first started.
It's not as dangerous as I thought it was, but there are inherent risks. But because that belay
loop incident was so close to home for me, I have avoided using it for anything other than
carabiners. So, what do you do with your rope? You don't go down, but you go up from the bottom
leg loop into the waist belt loop, and you follow the exact same thing that the belay loop is in.
And that way, it's grabbing your legs and your waist at the same time. You want to suck up your
knot as close to your harness as possible before you start tracing this figure eight, which we'll
show in another video over the shoulder so you get a better view. I just want to really emphasize
where it is supposed to be on your harness. You can finish your knot, since we are trying to be
thorough here with a safety finish. Either way, you can see here that I'm tied into legs and
waist. You don't want to miss one or the other. People have missed one or the other, and it can
either flip you upside down or pull on your waist quite uncomfortably. You want these to both be
working together on your harness. Anyways, that is where you tie in to your harness.
So let's go over start to finish how you tie in at the cliff. I already have my personal anchor
safely keeping me attached to the anchor while I do this, since pretty much all leashes are right
here near a cliff edge. So leashes are around the anchor. Got to untie that, and then I move my
personal anchor out of the way and put it in my harness in those two points, and I tie my figure
eight, which is just half a figure eight right there, and then we trace that. Go over right there,
tighten that up, and to check my length to make sure I like where it's at. That looks like it's
long enough, and then I tie my last safety knot there, and now these leashes are all standard
size. The ones that have this padding over them, the tubular webbing, and so when I have this much
tail left over, I know that it's the length that I like. Then I put my tail through the end of there,
just because that's the way I like it. Keeps my knot nice and tidy, and then I check myself to
make sure I don't have anything in my pockets. My harness is correctly attached and tight enough.
Everything feels good. I got my hat leash on and my personal anchor. I can pull off,
clip like this, but before I go out, I'm going to ask someone to buddy check me. Hey Kyle, can you
clip in and check me real quick? Yeah, I'm all clipped in. So your harness is tight enough.
You got a double back. You're through both the tie-in points. Your figure eight looks good.
You got your backup knot. The figure eight on the leash rings looks good.
You got your hat leash. I'm locked. I'm ready to go. I'm psyched. I'm ready to go.
Sweet. Thanks, Kyle. Have fun. This is how long to make your leash.
So everyone has a different length, and every rig you get on is probably going to have a different
leash. Leashes are usually 12 feet long, but they're not always the same. So what you want
to do is you want to make sure you got part of your figure eight tied already.
I'm going to go up through my tie-in points, and then now I'm going to hold it here
right next to my harness like it's already tied, and I'm going to push the leash rings out with my
foot. And I'm going to make sure I can push it out with my tiptoes so that I can stand as tall
as possible without the leash yanking me down on the line. Because if you tie this too short,
you will not be able to stand all the way up. You can also have preferences of how long,
depending on if it's just big enough for you to stand up. It's going to be hitting the back of
your heels, so you want it a little bit longer than that. Some people like it drooping below
the line to have it extra long. It's all personal preference, but you at least have to make sure
that you can stand up all the way. So use that foot, push it out, get the length. If you want
to cinch this figure eight as close to your tie-in points as possible. So you're going to
adjust that beginning part of the figure eight to move those points for you.
Check it. It's good. And then finish your figure eight tie-in and have fun.
Where do you put your line slide when you're not using it? In my situation, because I have this
dog bone from a quick draw that I leave permanently on here, so I can clip it on here and not drop my
hangover. I have to and want to naturally clip it to my first gear loop on the side,
but there are multiple ways of doing it. My preferred method of where I put my line slide
is just right the furthest back gear loop because it keeps it out of my way.
Some people like to clip two gear loops so that it kind of keeps it even more out of the way.
One thing that I do like to do is I'll use this, my personal anchor, and when I'm ready to line
slide somewhere, if I'm not, if I don't need the efficiency or I'm just resting, I'll use this
first loop and keep it here. And when I was first starting, I would actually take my auto locker,
put it on the side, and I would just have this on my personal anchor, and I would use it as a
How do you attach your line slide if you are done eyelining? More often times than not,
I like to clip my hangover, main and backup, while I'm still sitting on it. It's actually
a lot easier, I think, having this extender on here. So just really what I'm used to.
And then you want to keep your leg on here. You don't want to just shock load it. You go down
gently. And before you mount it, so many times it's like upside down. You want to make sure that
it's right side up before you lower your weight onto it. Once your weight's on it, then you know
it's fine. Like it's straight, it's not twisted, and I'm ready to go. You do want to be mindful
of the direction you're going. If I was going that way, I wouldn't want the ring on that side
because then it just clinks and clinks all the way up. Another way you can do this, if you're
hanging underneath, let's say I whipped, fell, and I'm over this shit, right? I could, after I'm done
climbing my leash, I come over here. Usually it's clipped to this side. I can unclip it, pick which
side I want, this side or this side. But here you want to make sure you grab the backup and the main.
You can start with the main and then take this backup and clip to it, and then put your weight
on it. If you need to bypass loops, segments, twists, whatever, all you do is put your heel up here,
lift your hips up, and lift it up and over things. And that is how you put on your line slide. How do
you take off your line slide? Well, you just take it off. It's not really rocket science, but let me
show you a few tricks. What you can do is I move it towards my chest and then I mount so all the
stuff is like here and manageable and not like behind me. Once I'm on top, my line slide's just
hanging here, I can unclip it. Don't drop it. I would have dropped it if it wasn't on this just now.
And you clip it off to your side. Don't forget to take it off the high line. Two weeks ago,
I did this, and I got here, and I stood up as hard as I could, and I wasn't going anywhere.
And I started laughing because I realized I never took my line slide off.
So make sure that you take your line slide off before you mount and start walking.
What kind of hats do you need for highlining? Well, pretty much anything that blocks the sun
would work for you. The size of the hat is not that important, even though you don't want it
to come off too easily. It's nice when they have adjustability in the back, but you can also make
it really tight, really tight, and this is what I've done in the past, and not use a hat leash.
Not only is it uncomfortable to have a super tight hat, some hats can't get super tight,
like this one, which has a really crappy buckle in the back. But I can put a hat leash on this
hat, which is pretty important to not litter with hats, which I have lost a few, and it's
important to not get your leash tied up around your highline. In order to have a hat leash,
you have to basically install the paracord, just three or four millimeter string paracord,
and make sure it's on something secure. Now, when you have a hat leash, you can't eliminate a
carabiner by just tying the string directly onto your harness, but sometimes I like the flexibility
of just having this, and girth hitch it on, and then you attach it to your hat. Make sure it is
on a secure part of the hat, and something that just doesn't come off too easily, because about
every time you whip, it's probably going to fall off. Now, I'm not too fond of having this string
loose and flopping around all over the place with a hat attached to it with a highline there. Now,
you know, one little seesaw with this isn't necessarily going to hurt your highline,
but if it did fall on this side, and you were to fall on this side, and it would
could damage your webbing. So, one option you could do is to do that, stick it down your shirt,
and then clip it to your harness gear loop, and then when it falls, it's not too far. You just
string it back up, pull it over, and that way you don't have a bunch of just loose stuff flying
around when you fall off of a highline. So, basically any hat is fine, but the super good
enough hats are probably the best. Buffs are a nice option when you're highlining. This can help
keep your music in your ears, and keep the sweat out of your eyes, which on a hot day can be quite
frustrating when you're trying to laser focus while sending a highline. It can keep you warm.
It can protect you from the sun, and if you're into blindfold highline walking,
then this is actually a really great option that's pretty convenient when you are trying to
practice highline blindfold walking. And of course, if you do have a buff,
you can look like you belong to the Colorado or East Coast slacker groups.
What colors should you wear when you highline? It's pretty important to have the right colors.
If you want a photo, that's worth sharing. As you can see here, just in the camera right now,
in this white background gear room, how bad a white shirt looks, and a light colored hat,
and how there's almost no contrast, even with all the gear on the wall. So, let's go over a bunch of
examples on what not to do, and what to do when wearing colors highlining. So, you can see here
on our first photo, the 960 footer at Taft Point, Jerry Meschewski is wearing green and gray. And
you can see how difficult it is to see him, even with this picture that is closer up, and with a
shadow in the background. It doesn't pop. Not like this photo of the same line with Kim on it,
with all purple. And you can see how where her skin is showing, how she completely blends in
with El Capitan. If she had a purple jacket on, you would actually see a little bit more of
her entire body, and it would actually look even better. Kim's purple outfit also looks good, with
the difficult shot of the wall behind her, with the trees and the rock. And it pops in the shadow,
or without a shadow in the background. And her green hat pops as well. You can see Sebastian,
without his shirt on, he only pops if there is a shadow on the wall, and the sun is on him. You can
see Jules Camp here in Marseilles High Line, over the ocean. He's wearing light gray shorts, and no
shirt. And you can barely, barely see him. And the same problem here, the no shirt problem, is Andy
Lewis walking the Cabo San Lucas Super Good Enough line, without a shirt on. And if he was wearing an
orange shirt, or some other pants that were a little bit more popping, it actually could look
a little bit sharper in this photo. Lucas and Fridi have their colors pretty much dialed. Lucas'
colorful top and bottom, they're on the 55 footer on the line. And you can see the difference between
the pants Fridi is wearing, where it's black bottoms and yellow shirt. You can see how much
of a difference that's popping. Inspired by Lucas, I did get yellow pants, and wear an orange shirt
here in this photo. And you can see how much more it pops. Now it does kind of look funny when you
go out to dinner later that night, wearing clown clothes. But if you're going to go highlining,
you want colors. Fridi is doing a handstand on the left, and Lucas is on the right. And you can
see how much more that orange pops, and how it can look a lot better in a photo. This is a very
difficult shot to get, with anything other than bright colors, because of how dark and gray and
gringy the background is. You can barely see Henry Smith here on this high line, where he's wearing
the exact same color clothes as the background. You can basically only see his legs. Whereas the
exact same photo is with blue and yellow, and it pops with such a busy background. Now I'm wearing
a yellow jacket and yellow pants, because I forgot I had yellow jackets when I bought my yellow pants.
But it worked out really well for a photo like this, with the sun just hitting me, and that whole
background being in a shadow. If I was wearing anything dark in this photo, even the sun hitting
me wouldn't light me up. Sarah Kuklenberg has a onesie on, that's quite colorful here on our line
at Heilfosch in Iceland. And then Robert is wearing an Icelandic sweater, that's not colorful. And you
can see the difference between Sarah's and Robert's clothing in these exact same photos. And if you're
going to highline a glacier line, don't wear dark gray at midnight with dirty ice. You can see the
difference between Kim wearing her purple and red clothing versus my black clothing, and how much
more she pops. Another line we did in Iceland, you can see my green shirt and dark pants are not
popping, even with a blue background. It doesn't look nearly as good as Kim's orange pants, and in
this case her white jacket. Now if she was against the sky, the white jacket could be a problem. So the
more you look like a clown when you're highlining, the better your photos will turn out. Doesn't this
look better? Let's talk about music management. Not what music you should listen to, but how to
manage how to listen to it. I have wired headphones that I typically use. I have seen people use these
before, and it seems to be pretty intense to have this on your head while highlighting. I don't see it
too often, and I don't think I'll ever try it. For the wired headphones, I usually have a little tiny
mp3 player that are pretty cheap these days, and I just clip it to my leg loop of my harness. It's
attached, you know, by the end of this, and so it has fallen off a few times. Pretty rare, but it never
comes off of this because it's so lightweight. I don't like to have loose wires and everything when
I highline on the outside of my clothing. So just like my hat leash, I put this through my shirt,
and this would clip to my either my phone. I don't typically take my phone because my pants don't
have zippers to keep it in there, otherwise it would be nice to have that. And then something
I've learned, you can just do it this way, but I like to take these little, I don't know how
fashionable they are, these little paper clip things, grab it there, and I clip it in place.
The one time I did forget this, I lost an on-site because it was like pulling on my ears and pulling
me down. So I do that, and plug in my thing, and crank my music, and try to have like an mp3 player
that has like a hold or something, so like when it gets bumped, it doesn't freaking change your music
in the middle of the highline. So this to me is a pretty solid way of doing it. If you are,
if you have like a bunch of hair, it's actually kind of nice because usually you like pull it up
and bun it up, so it doesn't get like stuck in a line slide or something. You can actually take
one of those wired bluetooth ones that just have the short wire that go in between your ears,
and run it through your hair, and then into your ears. And that way it doesn't fall out,
and it's like super minimal. But you do have to have something, I guess, in your pocket
when you're highlighting for the bluetooth. So either way, you're going to have a source,
and you got to have something in your ears. The moral of the story is, make sure you don't drop
anything, and make sure it doesn't interfere with your highlighting. So you figure out what
works best for you, but those are my tips with music. Hey thanks for watching, but please do
not be an idiot and go highlighting your first time without going with someone who knows what
they're doing. This video series is just to prepare you, and help you have the gear, and make
it so you can practice before you get that special opportunity to finally go highlighting. If you
already highlighted, please share this with somebody you might take out, so they can go
through the whole video series, so they're fully prepared to get on that line, so you don't have to
It's better for the YouTube algorithm ecosystem for me to release these once a week, so we're
going to do that every Saturday until they are all out. So you don't have to wait until we do that.
We're going to put the unlisted video links in the description below, so you can just blow through
all this, look at the textbook, and move on with your life. This is a gift economy styled education.
I believe it's more important to have this information free and available to everyone
than for me to get $20. But it's not free to make. So if you enjoyed the entire course,
and you read the textbook, and you look at the Bolting Bible, and watch all of our episodes,
spot us $20. It really helps. 100% goes back on the channel, as you can see on our donation page
on slackline.com. We're a very open book. Make sure you keep your eye out for the Highlining 102
course. We are going to completely finish this, and the Bolting Bible 2021 version, before we
finish the Highlining Anchor course. But that's going to be, oh, it's a lot more exciting to
make that than this series. So we're pretty excited about what's coming. So make sure you
hit that like button, and we'll see you at the next video. Cheers.