Taft 960 or "Dusk to Dawn" is Yosemite's biggest highline at 292 meters and has finally been sent after it was first rigged 3 years ago with Jerry Miszewski. Friedi Onsighted in the dark, and Lukas sent the next morning so they decided "Dusk to Dawn" was good name. Robert Yuwiler onsighted it and Mark Boyd crossed it as well. Everyone else enjoyed crossing it one way or another. Thank you to those who sent the line and Kyle Lovett, Zollie Goodman, Kim Weglin, Christian Saupe, and Sebastian Segraves for helping rig the line and being involved.
We put a dynomometer on the anchors and leashes to find out how much force is on such a huge line. We thought there would be more force near the anchors and less in the middle but we got very different results. If you love to nerd out on charts, we got one for you at https://www.hownot2.com/hnth/forces
How much force does the Taft 960 foot line see when we walk and when we whip?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jenks and I'm at Taft Point in Yosemite National Park.
And this is the longest line here in Yosemite National Park right now.
And right now Kim's walking on it.
And we have a dyno on this anchor, that anchor, and one for our leash.
So we can show you what the forces are in real time.
Depending on where people are on the line.
The anchor is pretty cool.
It's just this rock back here.
A little crisscross harness we make for it.
Two ropes for that.
And then we wrap this corner of this thing.
Equalize it with the BFK.
And then we got our dyno, seahorse, screamer.
Because we have spider silk as a backup.
And this is one continuous piece.
We did not connect any sewing loops for this.
Main line is Feather Pro.
And the tension we put on this is anywhere between one and a half and two kilonewtons
before people get on.
It was 1.24 kilonewtons when Kim was sitting at the tree on her dyno.
And the one I have right here.
It started last night around two kilonewtons.
And then 3D onsighted in the dark.
Lucas got on this morning and also sent it.
Right now Kim is only about 50 feet out from that anchor.
And it reads 1.99 kilonewtons.
So she's adding about 0.75 kilonewtons with her on the line.
It's wiggling.
2.7.
There we go.
2.7.
8.
Did not go past 2.8.
That's hilarious.
So this line is 295 meters long.
Kim is about 150, 200 feet out right now.
And she is 10 meters lower than this anchor.
The anchor on the other side is about 7 meters higher than the top of this big rock that
we A-framed off of.
Now that she's close to this anchor, she's putting on 2.1 kilonewtons again.
She was putting the most force on when she was in the middle.
And it's going back down the closer she gets to us over here.
Kim's really close.
1.8.
1.7.
1.8, 1.7, 1.5, 1.7, 1.8, 1.5.
It was a full kilonewton more when she was in the middle.
Super interesting.
Kim just got off and it's 1.14.
All right, Kyle's going to whip for science.
Are you excited about this, Kyle?
Ready.
Yeah.
Mostly because when you're done and you want to actually go walk, you got to slide back
this super steep 960 foot high line.
But yeah, we, uh, uh, two soft shackles taped.
So it shouldn't, uh, shouldn't come off, right?
No, I'm not worried.
All right, cool.
Go have fun.
Okay, Kyle is 165 pounds.
It was 1.14 kilonewtons before he got on.
And he's sliding out right now.
And it's about 1.8.
He slid a little 2.81 kilonewtons on here.
What'd you get, Kyle?
1.22 kilonewtons.
That's pretty mild.
All right, so Kyle's at 2.8 kilonewtons out in the middle.
It's almost a full kilonewton more than when he's closer to us.
All right, there's his whip.
3.31, 0.96 kilonewtons on his dyno.
And let's see, 3.36 kilonewtons on here.
So it was only a half a kilonewton on the anchor when he whipped.
2.87 kilonewtons and Kyle's bouncing.
2.91, 2.99.
Keep going!
3.33!
And it's 0.8 kilonewtons on his dyno.
And it did not change the peak force over here when he whipped.
It was at 1.5, 1.4 kilonewtons right before he put his foot right there.
Thank you, Kyle.
So this big highline is super interesting.
It was only 1.3 kilonewtons before we got on in our later sessions.
It saw a lot more force in the middle.
1.8 kilonewtons when you got on, 2.7, 2.8 in the middle,
which is a little counterintuitive to what we thought.
And then about 3.3 was the highest force that Kyle was able to get.
You can check out all the data on a chart I made on slackademics.com
of all the information we got here.
And make sure that you're not like Robert Euler,
wearing terrible colors like he is right now.
He's wearing gray.
Can you believe that?
Even though big highlines don't see a lot of force,
especially a lot of peak forces,
doesn't mean they're safe because if the mainline breaks,
you're going to fall a long, long ways onto the backup
if you have loops like we have here.
Therefore, you shouldn't highline big highlines.
Don't be an idiot and go highline big highlines by yourself.
Instead, go with a bunch of hippies that like doing handstands
so you don't have to rig this whole thing by yourself.
Anyways, don't try this stuff
just because you saw some idiot on YouTube show you how to do it.
Make sure you go with someone who knows what they're doing.
Until then, check out the Church of Slacklife to check out stoked people,
including Kyle right here is going to share his testimony.
And you actually might see that before this episode comes out.
Thank you to my Patreon supporters for donating one stoked dollar per episode.
It really helps me afford expensive shit like this.
We have beta for this line and all the other Yosemite lines in two separate videos
and all written beta on slackademics.com.
So if you want to go repeat something like this,
we have all the information that you need.
Until you have a chance to rig a 960 foot highline,
check out our other episodes and don't forget to subscribe,
like or follow whatever platform you are on.
Cheers.