Climbtech Removable Bolts are fancy and work great and broke super good enough, but we aren't sure if they have a ton of value for rock climbers. I'm sure there is the niche case where they can help, please comment where you find them useful or if you have them. According to CT's manual 1/2" RBs are not meant for catching falls, but the 3/4" and 1" RBs are. Kevin Kent donated these two bolts and we broke them with Steve Glotfelty, Bobby Hutton and Andrea Nichole in nowhwereville Nevada in limestone rock.
We are going to test a $75 bolt today. A Climtech removable bolt. I guess that's what RB stands
for. We got two of them today and we're going to test them in this mine in the middle of nowhere
in Nevada that isn't stable and they used to mine heavy metals. So what could go wrong? We have a
hydraulic anchor deep in the back of this thing and we're going to be pulling this bolt which
will be anchored closer to the entrance. We're going to be pulling away from us for safety.
Let me tell you a little bit about this bolt. I'll show you how we're installing the bolt
and then you can watch us pull the bolt. I'm not going to hold you hostage. If you just want to
see the carnage, timestamp's rolling. Now this half-inch bolt isn't meant to be catching giant
whippers. Now their paperwork says that this half-inch bolt is meant for static environments
such as top roping, doesn't have giant whippers on them, and route setting and belaying, hauling,
maybe search and rescue, and also they list industrial access which is actually where I
think it shines. The other stuff I'm not so sure about which I'll cover in a little bit.
However the commercial they put out about six years ago was clearly targeted to climbers.
These Climtech removable bolts since the prototypes came out 1997-1998 and I can honestly
say I've never had one pull out. I've used them in situations from thousand foot big walls to
overhanging sport climbs and to me it's the most essential piece of gear that I've come across
this is the most essential piece of gear that I've come across for
and the commercial scrambles the rest of the words most essential piece of gear that I've
come across that made it sound like it's a standard piece of gear for every single rack
that should go on every harness that's the vibe I got years ago and the commercial has a twist
the co-founder Carl who also invented the RB took a giant 50 foot whipper on the bolt now the one
he whipped on was a three quarter inch bolt which is rated for 22 kilonewtons and can take a whipper
which I thought he originally was whipping on the half inch bolt but then after watching the
commercial again it was three quarter inch now kudos to him for taking a giant whipper on this
thing I think it'd be great if everyone who invents gear takes whippers on their gear
to make sure that it's super good enough but now that I learned a lot more about forces
his feet were at the bolt they had a ton of slack so it was one of the softer catches you can do
that bolt probably didn't see more than four kilonewtons still kudos and you can't see around
the corner you might have a 14 point anchor underneath that bolt in case it comes out
which I know at least I would have done if I was doing that trick so this is clearly marketed to
climbers now the largest hole I've ever drilled in rock was 5 8 inch or 16 millimeter and that's
to install what I believe is some of the strongest bolts in the world that break almost at 20,000
pounds of force more than super good enough and those were hard even in sandstone 5 8 inch was
hard to drill it takes a lot more battery and energy and it leaves more impact leaving a bigger
hole and so if this is intended for climbing the three-quarter inch hole is massive it's just
massive how big of a hole that is to be putting in rock for a temporary anchor now I'm not quite sure
why you would need a temporary anchor that requires such a big hole whereas I could get almost
I don't know 100 kilonewtons out of a bolt a three-quarter inch bolt I just feel like there's
some better options out there if you're just looking for a temporary option now if you look
on their website they also have a one inch diameter version of this thing rated for 10,000 pounds of
force now a one inch normal bolt would be probably rated a lot more than that but it is removable and
that is uh has benefits for some applications if you look at the level of certification they got
and all of the instructions and fine print you're realizing that they're trying to target more of
the industrial rope access community more than they are climbers now there might be a niche used
for the half inch or maybe the three-quarter inch in the climbing community but it's not like a
standard piece of gear that belongs on every harness please let us know if you use them in
the comment section below what you think of them and where they apply so people can get more than
just my opinion on this now their half inch bolt is really only designed for two people's static-ish
body weight so you could use it for like top roping for example but is it worth using these
for that application for the cost of the bolt for the effort to drill a half inch hole and requiring
a hammer and a punch to remove it if it got set too much i don't think so now we do like climb
tech they make the wave bolt which is extremely popular and other bolting and climbing gear
they're great it's just we're picking on this one product because i thought their ad six years ago
was pretty funny now if you are looking for a removable bolt we found concrete screws are
amazing they're like a buck and they're some of the strongest bolts for the diameter that we've
ever put in we're constantly using only three-eighths inch bolts in order to hold down our hydraulics
when we're doing our bolt buster tests and bobby regularly uses these for route setting if he's not
sure about where he might want an anchor he'll temporarily put those in and then after he
installs the whole route then he will replace that with gluons and upsize the hole if he likes it
otherwise it's just a three-eighths inch hole that you can fill and it's a little bit less
of an impact now zinc plated four inch by three-eighths inch diameter concrete screw is
only like a dollar plus the hanger and if you're going to put in something permanent
please put in stainless and we'll cover the caveats to both how to use them how strong
they are and our experience with them in a future video later this spring so i ask that
you subscribe in order to see that and bigger channels get to do better episodes it validates
the channel so when i approach different people they're more likely to say yes it doesn't cost
you anything please subscribe it helps us out a lot i have weeks spent on the book of numbers
in the bolting bible you should go check it out you can learn in 15 minutes what took me
five years to figure out it just has everything color-coded and organized and what bolts and
where and just different categories sometimes the test will show up in two charts if it's relevant
for both those charts and hopefully we're able to answer more and more questions for you guys in
the bolting community and thank you to kevin kent who did provide these two bolts for us to break
they are expensive and also to my patrons who make it possible for me to work 30 hours a day
eight days a week in order to answer every question anybody's ever had about gear they trust
someday maybe we'll make that happen you can see that the fins on the top get pulled down you have
the cone the cone is a little bit less than a half inch which is the size of the hole it goes in
and then as the fins go out they expand and hopefully stay in the hole now this is going to
be strongest when you're pulling straight out as opposed to shear where if you hold it here and
pull down because the cable in here is going to get kinked now a lot of bolts are sometimes
stronger in shear because you're not pulling against either the wedge or the glue and so
shear is going to give you like really strong results but not on this it's not meant for that
you can do it you're just not going to get possibly 11 kilonewtons now the first test
we're going to do in this mine is straight out because i want to do best case scenario and then
if we are getting great results we'll put it in this way and pull it in shear clearly not sponsored
by klein tech in case you can't tell but if you buy gear from extremegear.org 10 supports this
channel so our peak force is 2.2 kilonewtons that we put over here and it's looking like it's holding
there's the plunger so we're going to see if we can remove this we're going to back the pressure off
a steel beaner to a soft shackle to a bigger soft shackle to a giant yellow span set with
our adjustable sling method going to the slack snap load cell that we have to a big a h big ass
hydraulic it goes to a sliding x party for an anchor and this keeps it from flying backwards
when our bolts break how many expert bolt installers does it take to install the
well we'll show you here putting in a fresh one that's how easy it is so kudos for that part
we'll see if they get kudos for the exit part all right that is pretty cool oh wait that wasn't too
bad that was not too bad there are much harder to remove removable bolts well let's see if i can get
back in there there we go there we go there we go okay let's pull it to failure i'm so glad i put
that blanket there oh wow it broke at 14 it didn't it didn't come out wow that's gonna oh this is
falling apart the spring oh the cable broke would you whip bobby oh yeah i mean that's a cam 14.12
i don't think there's anything to pull against if we do get it to move
but you can see there where the wire broke so if you pull that around the corner and shear
you're going to get less because that cable is going to just break sooner um maybe you can see
that it broke right where that crimp is doesn't seem like a lot of pressure but enough to
make it where it breaks and now steve is putting in the next hole for us to test and shear so let's
see what see how fast we can destroy 75 one kilonewtons two kilonewtons are you kidding me
6.58 kilonewtons it's the mbs of a mine shaft would you whip the rock not so much all right
well that didn't work out so so hot for us can you get the bolt out yeah yeah do it do it do it
don't break the bolt get it oh what's the red stuff red stuff is cinnabar that's a mercury sulfide
ah i should touch that don't lick your finger after you've touched it
wow let me see it's a little yeah yeah the cable's like kind of kinked but good enough for the next
test over mbs oh my gosh this is the first thing that's ever flown the direction i wasn't pulling
13.48 same thing cable broke in the same spot as this one the cable snaps off right where it's
swaged i gotta show the swag that you can get at hownottoswag.com are you ready i'm impressed now
being 75 i don't necessarily think you should just go out and buy them so you can top rope
there are other ways to do that ow that doesn't have a plunger anymore put in the comments if
you've used these what you think of them and where you would use them what else was i supposed to say
that's not good like on the donut holes really the donut holes are already next to the ratchet
but like still like they were edible here are some of my final thoughts uh when i first heard
about rb's i was like whoa this is like the perfect solution and then when i did some more
research um turns out they're kind of hard to place expensive um so i never ended up buying
a pair in my circle of friends i don't know anybody using them um titan concrete screws
in my opinion are a much cheaper option and they fulfill all of the same criteria there is this
utopian idea that i keep seeing on forums what if you made a hidden sport climb and then
you'd use rbs to climb it you could have whole areas equipped like that
um in practice i don't know that anybody's done it and it's kind of silly for a number of reasons
one it really would be hidden um bolts are hard enough to find um on some routes and imagine
finding a hole um and then of course the hole is going to fill up with dirt maybe clean maybe
re-drilled and then the cost of it um in addition to having all of your draws already um an rb is
like six or seven times the cost of a draw and then you need 10 or 15 of them so i don't ever
see that really taking off um climb tech uh like i love their products i've spent thousands of
dollars on hangers and mussy hooks i heard a while back a rumor that they were not going to sell to
the climbing market anymore and i like called them up real quick i'm like hey tell me this isn't true
and they're like it's not true and i was like super relieved um but the rb um while a cool product
pretty niche not a general use product by any means even in rob development