Used Arborist Ropes Break Super Low!?

HowNOT2
100 followers
5 Video Views·Dec 12, 2022
Cody Zimmerer gave me 1/2" used arborist ropes that broke at 11kN and 12kN which is super low compared to my 10mm static climbing ropes that break around 18kN. Cory Grossman gave me some new rope of the same type and they broke almost twice as high at 20 and 21kN. Used 3/4" double braided bull run rope broke at 20kn which is also pretty dang low for how thick of a rope it is.
Our website https://www.hownot2.com/
👉SWAG at https://www.hownot2.com/swag
👉👉10% supports us at https://www.extremegear.org/
👉👉👉Clicking this gives you 10% off https://rockytalkie.com/HowNOT2
👉👉👉👉 1000 Patrons makes us viable https://www.patreon.com/howNOTtoHighline
I broke some arborist ropes and I'm completely shocked at the numbers. I've been asked many
times to break arborist gear on this channel and so why not start with ropes. We got a half inch
rope a well well used half inch rope from Cody Zimmerer and when I pulled it just with figure
eights on both ends it broke lower than a dynamic climbing rope that's around 9.8 millimeters.
Now keep in mind this thing is almost 13 millimeters thick and it's breaking like
30 40 percent lower than just like a 10 mil static. It's breaking so low in the 2,700 pounds
of force or even 2,500 pounds of force range and I couldn't believe it. So I talked to my
local arborist friend here in Washington Corey Grossman and he was like hey I can get you some
new rope of the same material and so I was able to repeat all these tests with a brand new rope
and in a figure eight it broke at 21 kilonewtons and 20 kilonewtons which is substantially better
which makes me feel better that these big ass ropes don't break super super low and in a stopper
knot it broke at 18 kilonewtons and we did that because we were really really limited on the
but with all stopper knots it's virtually impossible to untie after pulling it to
failure. Now the new rope wasn't quite double as strong as the old rope but it does show how much
the micro tears in these fibers are degrading the rope. Now keep in mind that a 10.0 static,
the white rope that I'm constantly using in this channel, the thing that I did the Dan Osmond rope
jump with, the thing that I haul with on big walls, my workhorse of 10 millimeters static rope
breaks at 18 kilonewtons pretty consistently. So just to give you a little perspective that
this 13 millimeter rope isn't really breaking any higher. Cody also sent me three quarter inch
double braided bull rope. This stuff is burly and I quote brought it up to 10,000 pounds multiple
times so it's well used. Now I'm wondering how he brought it up to 10,000 pounds multiple times
if it basically broke at 20 kilonewtons which is only like 4,500 pounds of force.
Now these were well used ropes again and I did not break test new versions of this. Now I've
been bantering with some rope nerds who have also done research. It's interesting that they brought
up that the bigger and the more static the rope is, the stronger it isn't. Basically because these
ropes have to take these bins to be in the knots that their fibers are tearing very much like a
strong man tearing a phone book. They're doing it kind of one page at a time and well real strong
men I guess rip it in half but you know what I mean. And I think the rope is doing the same thing
where those outer fibers are tearing first and it just rips, rips, rips all the way through the rope.
Now I'm not saying you should use an 8 mil or a 10 mil static climbing rope for your arborist work.
It is nice when you're wrapping that stuff around with all those trees and the bark and the abrasion
that you actually have some rope to work with. It's not just for the ultimate breaking strength
for how to untie it and the fact that it can withstand so much abrasion. Now we will be
breaking into knot videos in this channel where we break test the figure eight and the bowline
in a way that you can compare the two. I know I kind of mixed the knots here but that was based
on rope length that I had. But in case you don't want to wait for that the bowline is easy to untie.
Stopper knots you'll never untie and figure eights can probably be untied with a hammer.
Be sure to put some cool arborist rope stories in the comments below for our entertainment. Cheers.
