Air Crete Interlocking Wall Panels

Honey Do Carpenter
88 followers
15 Video Views·Dec 10, 2022
Okay guys, here we are.
It's the Honeydew Carpenter.
I wanted to talk to you a little bit about some ideas that I've been having as I've been
working through this project of building this aircrete shed.
And most of you have been following along, but if you haven't, each one of these panels
represents an aircrete panel that will be sewed together at a later date.
They are all encased in a form.
I was using sheet metal studs as a form to make these panels and to pour it into.
Here's the basic building and the basic layout of the panels.
Now that being said, let me go into another screen here and I want to talk to you a little
bit about some ideas for some alternate forms for those panels that I've been thinking about.
Now this panel right here, this one right here, I'll highlight it in blue.
Oh, I think I will.
There we go.
It is one that we have been using.
Essentially, the sheet metal studs that we are using look just like that.
You guys, in a prior life, I used to work for an architectural sheet metal company and
we had all sorts of roll forming machines.
We would manufacture anything from gutter systems for homes to different styles of roofing
panels and wall panels on these roll formers and every roll former was unique.
Just know that when you go and buy these sheet metal studs from the Lowe's or wherever you
get them from, they are made on a roll former and I'll show you a little bit about that
as well.
I was thinking about doing some tongue and groove type panels so when you put them together
that they would just kind of go together like a Lincoln Log set.
They would look a lot like these ones right here.
I just highlighted that one.
This is a female panel and this is a male for the tongue and groove system.
So essentially, I have some examples right here if I back it up a little and move them
over of ones I've drawn up and I've just kind of virtually poured the aircrete into them.
So these have the forms on each side and there's no form on the bottom because you would just
cover that with a C channel on the bottom and on the top and that's what would kind
of sew them together.
Now that being said, we could just bring these together and I'll just show you what they
look like when they're kind of pulled together a little bit.
So they would just fit together just like that.
Let me pull another one over and I might as well, I don't know how many I drew on there.
Oh yeah, there we go.
I'll just pull those all together real quick.
This is something I've been thinking about as an alternative way to build these sheds
and the reason I've been thinking about it is I just want a way that's kind of quick
and easy for people to do it.
So essentially what you'd end up with is a wall that looks like that.
Now if I tip that wall up, essentially it would look like that and then on the top side
of course it would look pretty much the exact same as the bottom side.
Now once you've got the first panel up and just put kind of an angle brace down to your
slab you could just stick the other ones right on it and of course you would have in the
bottom of it, let me get that turned around, there we go, but on the bottom of it you would
have a C-channel that was essentially, instead of the way I was thinking before, you would
just take some rolls or some expansion anchors and anchor a C-channel along your slab and
just lay these in it and then slide them together.
I was also thinking about possibly in the forms while you're pouring them, I was thinking
about putting some holes, like similar to this right here, like putting a hole right
there that went all the way through, let me push that in, and what that would accomplish
is you could take some three quarter inch or inch PVC and stick it all the way through
your wall system before you poured it and you could put a release agent on it that kept
a nice little film between the air crete and what not and then after it had set up you
could just pull that out and when you went to put these panels together you could either
put some tensioning cables through there and tension them together or if you put some more
holes in the center spaced evenly up through here you could run conduit and wire for services
and because it's air crete you can just drill right into where the holes are and you could
be able to put all types of things in there that way.
So that was just an idea, let me see, I want to undo that hole, so that's something that
I was thinking about. Now that being said, here let me pull the shed back up, if these
were tongue and groove panels it would be really easy like on these headers you could
go ahead on these panels that line a window or something and you could put say a piece
of mail form on the top of this panel and then put the female side down on this header
panel and it would just lock right in over top the window or over top the door and it
would make those details go together like the Lincoln Log really easy as well.
And so it's just something that I was thinking about, actually I had been thinking about
it for quite a while and I was at Harbor Freight the other day returning an auger head
and one of my viewers was in there, actually about 6 or 7 were in there, it was weird,
but we got talking about this and he asked me if there was any way I could do a tongue
and groove and I said actually I've been thinking a great deal about that.
Now I talked a little bit just a minute ago about roll formers and I want to show you
some examples of that and the particular one that I've chosen, I kind of chose it
for a reason because this is one that was fabricated in a shop and I used to work for
a fabrication shop, this is definitely something that isn't outside the scope of my talents
I'll tell you that much.
But this is them going through the system of building a roll former.
Now these, the stands up here on the side are just all the braces for the fulcrum points
of all the axles that would go through and would hold the actual machined formers.
That would be these rollers in there.
You see they've got the chains that go from axle to axle so they all turn at the same
rate and there's a better view of it right there.
But the reason I'm showing you this one is this one is they just home built or they built
it in a shop to make specifically studs.
Now here they put the guard on it and they've got the drive motor down there but as you
watch these studs being made they start out as just a flat piece of sheet metal and I'm
going through this in quite detail in case someone's never been around this type of machinery.
I have operated it for years and years so it's not that big of a deal to me but you
take that flat piece of sheet metal and it comes out the other end a sheet metal stud
almost identical to the ones that I'm using right now to form up the wall panels with
the flat sides.
That being said, it would be real easy to build a machine like this and just augment
the rollers so that it formed them in the shape that I was just showing you on the previous
clip.
Now this one particular machine doesn't have a full coil on it and just run continuous
and then have a break at the end where it can just cut things to specific lengths.
So I'm going to stop this and I'm going to show you one that is really similar to one
I used to operate that we built gutters out of and here this one is.
It's running off of a coil meaning there's a big roll of sheet metal.
It could make a thousand foot long continuous piece of this.
So as it goes through and it goes through the different rollers each one just folds
it a little bit further and a little bit further and then when it comes out the other end it's
the exact perfect shape of a gutter.
They have little machines like this that you can put in a trailer and gutter men use them
all the time and what not.
But the only reason I'm showing you this one is because I want you to see at the end they
have a hydraulic shear on it and they can shear these sections of gutter to the exact
length that they need them.
But as it comes out the other end it comes out the perfect shape of a gutter and it has
a hydraulic shear and so you can shear these things to the exact length that you need them.
And here's another good example.
The thing about it is what I would like to be able to do and I've actually invented an
air creep machine that has a conveyor belt that runs Portland cement out of a big hopper
and all the dry ingredients as well and homogeneously mixes them and then takes them on a conveyor
up into a mixing solution with water and paddles and mixes it.
And then once the slurry is mixed it's immediately sucked into another barrel where the foam
is folded into it and then a negative pressure at the bottom of that barrel sucks the completed
foam out and these are pretty large barrels so they'd be about 80 gallons at a time.
And the way it would work is while the positive pressure was pushing the air creep out to
pour all these panels you would be mixing a whole other batch behind it so it could
continuously make about 20, 30, 40 gallons every 10 minutes.
I mean it would just be a continual flow of air creep.
So essentially you could take all these panels and just lay them out, put the, here let me
pull up these, you could take and put these, you could lay out all of your forms the right
width apart, the ones that were male and female would be married together in the middle and
you could just sandwich them between a form piece with some form release on them basically
in the exact shape like these are now.
I'll give you a better look at that.
And you could like lay this wall out and you could pour that in a matter of minutes.
And so my whole idea is, and this is one of the big reasons I really want to do the Kickstarter
and get an air creep laboratory and a shop up so that I can experiment and I can build
these form machines that would make these types of forms and then I could draw up and
computerize really.
I mean this kit needs so many studs this length and so many studs this length and so many
headers and it would just pump them out, you could just bundle them up and you could ship
them off and it would be kind of fun to eventually, after this catches traction, have strategically
placed locations and franchise this out and give other people out there that are interested
in having a business of their own an opportunity to, when an order comes in and it's within
their region, it would ship out from there and it would save people tons of money in
shipping and we could just ship these kits out to people for different styles of buildings
and they could just go to a website and choose the building that they want and if they wanted
to they could just rent the air creep machine that created a continuous flow of air creep
right? And they could really DIY put up these buildings for themselves or they could hire
a contractor to do it. It would all be drawn out and engineered and it would just, once
they got them all poured, it would just go together as an erector set.
So that's just some things that I've been thinking about. We are going to go ahead and
finish this project. We should be releasing the video tomorrow putting this together and
the reason I mention that is because when we sew these panels together, I'm going to
use two different types and ways of sewing them together and just kind of get my viewers
input on what they think is best. So when I go to sew all the panels together on the
shed that we do it the best way possible. But I just wanted to kind of let you guys
know about what I was thinking and what I was doing.
Let me go to another one. I want to open up another file, the base detail, just so that
I can kind of explain what I was talking to you about earlier on how the base detail would
work on this other system. So instead of using that piece of angle iron and anchoring
it in and what not, I had a viewer actually tell me, why don't you just use expansion
anchors every so often and just put a piece of C-channel down. Actually, I think that's
what I'm going to do. Then I'll just run a piece of C-channel along the top as well and
sew them together. I will have to do something because these are not tongue and groove panels.
The reason I did it this way, guys, is I just wanted to do a project with AirCrete. I wanted
it to be DIY and I wanted to do it out of stuff that was available to me. The stuff
that's available to me on the market are those roll formed sheet metal studs. So that's why
I used them. Obviously, they don't have the tongue and groove ones readily available.
This is not something people can just go get. It would be kind of fun to just come up with
a system like that where you could pump out a whole shed's worth of forms, all the right
lengths and everything, and offer them to people. I mean, we're talking maybe years
down the road, but it would be fun to just put up different locations throughout the
United States that people were able to have one of those machines. I want to build those
machines. I want to experiment with it. It's not something that's outside the scope of
my talent. Anyway, that being said, thanks guys. I hope you like what we're doing here.
If you do, like, subscribe, click at the bottom and I will talk to you guys later.
