Complete Build of Portable Rocket Mass Heater

Honey Do Carpenter
88 followers
13 Video Views·Dec 10, 2022
Hey guys, how you doing? It's the Honeydew Carpenter.
I am super excited to bring to you this next video. It is the complete build
of the ultimate rocket mass heater. Now this rocket mass heater is very
unique in that it's portable and it's movable.
Most rocket mass heaters, once they're built in place, they're there forever.
And it's built completely of recycled materials and repurposed materials.
And it ended up being beautiful. So it has three
features to it that make it a rocket mass stove
that are really critical. The bench, the actual stove itself, and then
the stove pipe. The stove pipe is what I call my hot air vacuum
because I came up with a unique insulation system for stove pipe,
double wall stove pipe, that I created myself as a DIY
insulated with air creep. And so you've got the bench, the stove,
and the stove pipe, but each one of those has some really
unique features as well. The mass bench has its own directional
valve and it drops two feet out of the
exhaust down from the stove. And I've never
seen any other stove be able to
do that. So that's kind of incredible. The stove
is a hybrid batch box system completely insulated with air creep.
It's got a smooth exhaust portal with a vortex area where extra oxygen
goes in. And it has a completely air creep
heat riser. It also has a mass ring right around the downdraft on it and
this thing is completely portable. So the last element of it also has some
unique features. The stove pipe that's insulated. It's insulated with
air creep. It has its own through the window insert
that is actual part of the stove pipe that goes out
and it works awesome. It creates a massive pull that
overcomes a two foot drop from the exhaust
portal down into the bench. And I've never seen any rocket mass stove
be able to achieve that. So watch this video. You're gonna like it.
That is perfect. And that's good enough to hold it.
This tank is going to serve as the burn chamber.
This is kind of a hybrid rocket mass stove.
So this whole tank will have an inch of insulating refractory mix
all around it. The exhaust is going to come out the back.
Eventually I'm going to take a wire brush and get all the calcium off this.
This was a stainless steel tank on the inside of a
just a water heater. It just kind of melts.
It'll get hot enough that all that will just start boiling off.
This was blue last night, huh? Look at that. There's the burn chamber.
The teeth. This is going to be... I'm going to cut a
five inch diameter hole and this is going to fit out the exhaust
of the heat chamber. And this is where the
vortex chamber is going to sit. It'll be cool.
You see. Oh this metal is brittle. That's a saw blade. You just need to tack it in
place. With one good tap. And that's what it
looks like. I'm firing the mix a little bit just to
activate the... It's hard to believe this dry mix
turns into a really hard concrete. Really hard cement.
It is pretty amazing stuff. Hey buddy what are you doing?
Huh? Are you stirring that for dad? You're such a big boy.
See that? As you can see it's starting to get round.
It takes a few minutes of going back and forth
and putting it up on the... what you're putting it around
to do it. But I don't have a crank with a rounding tool on it so
this is what I do. Perfect. Yep. Look how close I am babe.
Just have to shave a little off and I'm golden.
And then I'll cut the rest of it out. This is where the sheet metal
or the stainless steel riser shroud will sit.
And then the exhaust will come out of here. And this thing will be able to spin
and you can spin the exhaust any direction you want when you're erecting
it. Once I take that skin off it needed a
little indention so I cut out a little indention on it.
And it's kind of a bear to get started but once it's in it's
really close to perfect. Oh that one's too bad.
Are you helping? Okay you put some in now bud.
Good job. Now I'll pack it down.
Okay put another scoop in bud. Good job. Now I'll pack it down.
Hold on. Don't dump any more in yet. I gotta get that layer.
I don't need to adjust this at quarter inch or an eighth. It's one way or the
other. Don't wipe it. Can you see that line
babe? I've never seen it in the flesh when
your little fire starters go off. Look at it suck. Dang that was fast.
Yeah that's it working. It's already sucking hard. That's crazy.
Just that little bit of heat. You could put a candle in here and get this fluid.
Hear it? Hey I want to get that noise. Yeah that's a rocket stove.
Hey guys if you like what we're doing here give us a thumbs up,
like, subscribe, be sure and click the bell at the
bottom to get notifications as well. And all these AirCrete projects that I'm
doing are DIY. There's things that you can do
yourself. A lot of people out there are getting
excited about AirCrete as I am. And check us out at our Etsy store.
We're at the Honeydew Carpenter Shop on Etsy
and there you'll be able to find out everything you need to know about
building a foam mate for yourself to make AirCrete or have me send one
out to you.
