Making Water Glass Refractory Mix for Rocket Mass Stove

Honey Do Carpenter
88 followers
19 Video Views·Dec 10, 2022
Today I'm working on a rocket mass heater for a friend, and as one of the elements of
it I have to create a refractory mix, which is a high temperature cement mix.
And one of the elements of it, it became clear to me that I was going to need some water
glass, or soluble glass, called sodium silicate.
And it's hard to find, and if you can find it, it's super expensive, and so that's why
I'm making this video.
One of the ingredients in it is silica gel.
Now silica gel is something that's very useful.
They use it for desiccant packs.
Every time you buy a computer, buy one in the box, there's a silica gel pack.
And I was like, yeah, I have some of those, and I went down to the basement and got them,
and my wife saw them and was like, what are you doing with that?
Because what my wife uses them for is, they look like this, and she has a bunch of them,
and they're little individual packets that actually look like that.
But what my wife uses them for is food storage.
She puts spices together, and rice, and noodles, and all this other stuff.
I don't know what's in here.
All I know is, you dump it in water, you boil it, and it's awesome, it's super good.
But I thought, you know what, I better not use my wife's desiccant pack.
In my research, I found that there's another way to source this silica gel, and there's
types of kitty litter that's made out of it, like this.
And it has to be, and not all of them are, but it has to be a pure silica gel.
This one, although it has some scent stuff in it, and it'll still create a pure water
glass formula.
Another ingredient that I found in my research for this was sodium hydroxide.
And don't let the name fool you, all it is is just lye, pure 100% lye.
And basically, it's found in household drain opener.
There's different kinds of household drain opener.
You gotta read the fine print.
Some of them have also, not only do they have the sodium hydroxide, they have like a sodium
nitrate in it.
Those cannot be used.
The third ingredient is just distilled water.
So if you want to make it easier on yourself, you can just click the link below.
I just wanted to talk a little bit about a subject matter that's just kind of been weighing
a little bit heavy on my heart lately.
And that's safety, because as the honeydew carpenter, I work with a lot of dangerous
equipment, saws and torches.
You need to understand all the hazards surrounding any saw you're going to use, or any chemical
you're going to use, and how to take the preventative measures.
My concern is that someone just might see me do it, and they just might willy-nilly
run out and try and copy what I'm doing without understanding all that stuff.
And I wouldn't want something bad to happen.
In this next phase of the project, we're going to be working with a caustic chemical.
So it's a household drain opener, but it's still very dangerous and super poisonous.
You never add water to this, ever.
If you ever mix the two, you always have to add this to the water and do it slowly, because
it creates intense heat, and it will boil.
Also, the receptacle that you use to mix it in, it must be either a tempered glass, like
a Pyrex, or a stainless steel.
I recommend stainless steel, because you can usually get them in larger receptacles, and
you can always wear the gloves, the eye protection, the protective clothing, and just make sure
you don't get this stuff on you.
If you do get it on you, you'll want to flush with water for like 15 minutes.
Follow the directions on the label, as far as all the safety precautions go.
Your safety is up to you.
Also, we have a link below that you can purchase this through, but it might be because it's
a chemical, and it might cost a little bit more to ship, so it might be better just to
go get this from your hardware store.
Okay guys, we did one batch, and we did it in a glass receptacle, and it made about 700
grams of water glass, and it turned out great.
However, I'm going to need more than this, because I'm doing a heat riser as well, and
so I'm going to make a larger batch, and I'm going to use a larger stainless steel receptacle.
So I think I'll make a triple batch, so I have a good amount.
I'll need to measure out 600 grams of sodium hydroxide, which is lye.
We're going to need 900 grams of the silica gel.
Let's see how much I get in there.
In five.
So now we have our 1500 milliliters of distilled water.
Now at this point, I'm going to go ahead and slowly add in the sodium hydroxide, or the
100% lye.
That's going to start creating a little bit of heat.
Are we going to do that upside?
What we'll do is we'll leave it in here, and let it just kind of boil down on its own chemically,
and then we'll take it outside and put it on the burner to accelerate the process of
dissolving the rest of the silica gel in, and show them the final product.
You can see it just kind of sits there for a while.
You can tell it's not even dissolving in, but once it starts, the chemical reaction
starts dissolving in.
It's pretty intense, what happens.
It hasn't started yet.
It's still perfectly clear water.
The water will start getting cloudy, and then you know it's starting.
There you see the water starting to get cloudy, starting to create a little bit of heat.
The silica gel is starting to boil on its own right now, babe.
Awesome.
Okay, it's starting to wind down, where it's quitting boiling, so I'm going to add some
heat.
The silica gel, with that heat, really accelerates the process, and it's dissolving in really
quickly.
Every bit of this kitty litter will dissolve in there.
It's 100% pure silica gel.
It'll have some dyes in it, because all the perfumes actually boil out, but the dyes will
stay, and that won't affect the integrity of the product at all.
And we'll just continue to boil and roll this until it kind of gets like a boiling sugar
on top.
It'll start to get syrupy on us, but it's, yeah, it's totally dissolved.
It's a rolling boil.
It's getting a film.
So this turned out great.
It looks perfect.
You let it sit for a second, and it starts to get a skin on it.
If you pull the knife out, the droplets are suspended on it.
That's perfect.
That just tells me we have a really highly concentrated mix, and that's how it's supposed
to be.
I'm going to go ahead.
This is cool enough.
I'm going to go ahead and dump it now into this bottle.
Oop, there we go.
That wasn't me.
Some skin, like that.
Nice pour job, babe.
Thank you, sweetie.
