18v nicad to 18 volt lithium ion battery adapter hack for Milwaukee cordless tools

Make Build Modify
66 followers
7 Video Views·Dec 9, 2022
I'll show you what I did with my 18-volt Milwaukees.
So this is an old saw, old battery, and the batteries are all going bad, and so I wanted
to be able to put the new lithium batteries in this location.
So I took the top off the battery, the top off an old NiCad, and I took the bottom off
of a flashlight.
This is the flashlight, I cut the bottom off and I put an old flashlight bottom back on
it.
But you can see where I cut it, and the old, the bottom off the new flashlight looks just
like the bottom off the new drills and receives the lithium.
And so this is the part that I ended up with.
I ended up with a bottom of the new flashlight and the old battery top fastened together.
So I can take, basically it'll go together in a new battery.
I'm trying to do this with one hand.
So that locks in, and then I can put old equipment in there.
So let's see if I can get this off.
That's a fully charged lithium running my skill saw.
I haven't had any ill effects yet with the old equipment.
And like, as for the flashlight, that's the old NiCad receptacle.
So it goes back in to the old NiCad, and I got light.
So I managed to keep the flashlight, use of the flashlight, kind of funky, but I didn't
lose the flashlight.
And I can run my old drills, my old skill saw, and my old Sawzall.
So basically retained about five or six hundred dollars worth of tools using new batteries
and new chargers.
Pretty cool.
