Parkside Performance Battery Backpack 20V_40V First Look and Teardown

Power Machine Tools
2 followers
The new Parkside Performance PPRA 20 A1 is a killer idea. When loaded with 12Ah batteries it can provide a total capacity of 48Ah at 20V.
#machine #tools #powertools
Hello fellas, if you haven't noticed Parkside is pushing really hard on expanding its range of power tools.
This here is another addition the all new Parkside performance rechargeable battery backpack.
The idea is pretty simple instead of inserting the battery or batteries directly to the power tool
And then carry their weight during the operation you're doing sewing cutting or drilling
You can insert them in the backpack. You can insert four of them carry the backpack on your back and then power
The tool you're using with one of these extension cords and believe me
Carrying two additional kilos in your hand is quite different from carrying them on your back
The backpack in its full glory the weight without batteries is 3.7 kilos inside
The user can find the extension cords I was talking about the top cover is spring driven
But Parkside implemented one really simple support
If you use your imagination, you'll see how much the backpack resembles an instrument briefcase
Really clever from Parkside the cable going out from the backpack is equipped with a bayonet connector
It's really thick inside are four wires each 2.5 square millimeters the extension cord for powering
a single battery power tool
You can rotate the cable
to almost full
360 degrees
The bayonet connector is super easy to operate
And by the way, it looks really tough
The extension cord for power tools requiring two batteries share similar design
Again, we can rotate the cable in virtually any direction
The backpack is equipped with a convenient stand you can leave it in an upright position on top of it
We have a convenient handle
On the back there's a latch for removing the shoulder straps
And now it looks even more like an instrument's briefcase the shoulder straps are well manufactured with really soft lining
The right one is equipped with cable clips really convenient
The lining facing your back is also really soft and made from breathing materials
You can secure the backpack clipping the shoulder straps together and you can additionally secure the backpack strapping it through your waist
Let's return to the more interesting part inside the backpack. We have slots for four batteries
We can insert even the biggest parkside produces the 12 amps hour
Probably you saw that the battery slots are labeled a1 a2 b1 b2
That's due to the design of the control board inside
According to that labeling the backpack is equipped with four battery level indicators and a membrane on off button
If you're planning to use the extension cord for 40 volts power tools
You have to insert at least two batteries in the backpack
The first one in one of the two a slots and the second in one of the two b slots
If you're using the extension cord for powering 20 volts power tools, and you have only one battery
It simply doesn't matter in which one of the four slots you insert it
If you insert four batteries, all of them will be connected in parallel
For example, if you insert four 12 amps hour batteries
You end up with a total capacity of 48 amps hour few simple tests
A single battery in the a1 slot using the extension cord for 40 volts power tools
No voltage on the first adapter
20 volts on the second two batteries one in the a1 one in the a2 the same cord
Again, no voltage on the first adapter
20 volts on the second one battery in the a1 and one battery in the b2 slot
20 volts on the first adapter
And 20 volts on the second b1 and b2
20 volts on the first adapter
And zero volts on the second the extension cord for 20 volts power tools a battery in a1
a2
b1
and b2
Later I will disassemble the machine so I can better explain you why it's acting like this
If you insert four 12 amps hour batteries into the backpack and use it to power a 20 volts power tool
You can virtually run it for days
That's a total capacity of 48 amps hour using the backpack to power 40 volts power tools. It's even more beneficial
You won't need to carry in hand the weight of the two heavy batteries. Your hands won't get tired so fast
Of course in this configuration
The maximum battery capacity is only 24 amps hour
The cables of the backpack are long enough. You can place it and remove it from your back without putting a strain on the cables
You can easily get rid of the loose cables by using the cable clips on the shoulder straps
The backpack is really comfortable
It can be really well secured and I can barely feel its weight loaded with 2 4 amps hour and 2 8 amps hour batteries
It's finally time to look inside starting with the adapters and I have to say
I'm quite disappointed from Parkside
Take a look how terribly
This thing is designed
due to the rotation
in the adapter
Those cables will eventually snap
The soldering points will snap
And not only you lose
Connectivity but you might short circuit the cables
absolutely awful design
Pay attention how the cables are
twisting
All of this should have been done with some sort of a sliding contact
But definitely not by twisting cables this over here is a resistor used for battery identification
When you open the backpack you find one really big and relatively sophisticated control board
The board consists of two identical parts
You can now see how battery slots a1 and a2 are connected in parallel
Same goes for battery slots b1 and b2
Again connected in parallel the output of each battery slot is going through two mosfets
Eight mosfets in total which can be activated and deactivated under command from the control board
Inserting batteries into the backpack won't give you voltage on the output cable
Until you press the on off button which sends a signal to the control board to activate the mosfets
Each battery slot is equipped with a current sensing shunt resistor
If the control board is not reading power consumption on any of the battery slots
It will automatically shut off the backpack after some time
I'm sure you saw it the two identical parts of the control board are equipped with fuses similar to those in the non-smart
Parkside batteries. Like I said
The battery slots are paralleled two by two
And they're having output points on the opposite side
Of the control board on the underside of the control board. We have only radiators for the mosfets
You can see the four output cables if you're using the extension cord for 40 volts power tools
The first adapter is powered by the first set of battery slots connected in parallel
The second adapter is powered by the second set of battery slots also connected in parallel
If you're using the extension cord for 20 volts power tools
The configuration in the backpack is the same is the same all the way to the first bayonet connector
However in the second bayonet connector
The pins are connected in parallel two by two meaning that all four batteries are connected in parallel
By the way, now you can get even better understanding how stupid this design is
Let me prove it to you the backpack is on
The probe of the multimeter is in the minus terminal of the first adapter
The probe is in the minus terminal of the second adapter
Same test, but this time with the extension cord for 20 volts power tools
If you switch off the backpack the mosfets will also be switched off
Well guys, I think I managed to cover everything about this product
The idea is really great, but connecting batteries in parallel has some drawbacks, especially if they are different
It's advisable the four batteries you use to be identical equally charged and equally aged
But so much for now in the near future i'm planning to make a separate video testing this baby
So stay tuned. Bye guys, and see you soon
