7 reasons I used Rockwool insulation at my house.

Matt Risinger
48 followers
1 Video View·Dec 6, 2022
7 reasons I used Rockwool insulation at my house.
Hey guys, welcome back to my house under construction.
This is what I've been calling the real rebuild project.
I'm in a critical stage right now, I'm in the insulation phase, and in fact, my sheet
rock comes in two days, we're going to start hanging the rock on the walls.
So this is a perfect time to give you a tour of my insulation, show you which products
specifically I use and why I use them there, and in this video I'm going to give you seven
reasons why I chose Rockwool for the majority of the insulation of my house, minus two minor
areas where I did a different type of insulation.
Today's video is sponsored by Rockwool.
Let's get going.
All right guys, so first off, let's talk about the type of insulation that I use.
As I mentioned earlier, this is Rockwool Bats.
Now, if you're not familiar with Rockwool, Rockwool is a mineral wool insulation.
If you look at their commercials, they basically say, look, this is made from rocks, and the
beauty of rocks is that rock is a very long-lasting material, and it also has, because it's made
from rocks, some natural fire resistance tendencies.
So for instance, if you just take a standard household lighter and you were to try and
ignite this, you're going to notice that it will not burn.
If you did this to a whole lot of other materials, you will ignite them, and this one is not
going to burn.
Isn't that cool?
So fire resistance is a big reason why I like Rockwool, but one of the things I also like
about it is that it's relatively straightforward to install.
Now, my house was framed on the exterior on 16-inch on-centers, which means that these
bats right here are a friction-fit bat.
Now, this is unfaced, and I like unfaced bats because then I can deal with vapor and air
separately, but it also means you've got to watch these details.
Like this right here, I've got an electrical, or pardon me, I've got a low-voltage outlet
down here that's going to be a Cat6 wire for Ethernet.
The insulators did a great job on this by slicing the bat so we'd get full-depth insulation
in that cavity rather than stuffing it in and having a wire in there.
Now, when you're working with it, you don't also need a whole lot of PPE, which is nice.
Typically, you're going to wear long sleeves and gloves, and I'm not installing, I'm just
messing with it.
That's why I just have gloves on.
And you're going to wear a dust mask.
You don't even need a full respirator, really just the dust mask.
In comparison to a lot of products, like you think about the guys that are using spray
foam in a house, you have a giant rig, you have hoses, you have respirators, you have
off-gassing to deal with all those other things.
With this, open the bag in here, pull the bats out, and you're going to friction fit
it in each location.
Now, one thing I really like about Rockwell, too, is that they're telling you the actual
bat right on there.
So this is an R15 bat, and this is an exterior wall.
Now, if you pan around here and you look at this one, this has the Rockwell logo on
there, but no R value.
This is their interior product.
This is called Safe and Sound.
This is a sound dampening bat.
And that's really the second thing, besides fire, that I really like about Rockwell is
that it's a very sound dead product.
We're going to do a test a little later in the video.
We're going to show you how much sound control this is going to give to your house.
But if you just stand here, and I'll be quiet for a second, incredibly dead air in this
space.
I don't know if we can get room tone on the sound, but super, super dead in here.
And I actually have some guys working downstairs.
You can't hear them at all.
And often, I'll yell upstairs while this Rockwell is in place, hey, what do you want for lunch?
Or hey, come down, I got an appointment here.
And you got to physically walk up the stairs to do it.
Now, that sound is going to change a little bit once Sheetrock gets in.
The Sheetrock will bounce that noise a little bit.
But this absolutely absorbs it.
In fact, I actually built my studio out of this and covered with a fabric so that it
would give us that noise abatement.
The next thing I really like about this is it's really easy to install yourself if you
wanted to do the install yourself.
Now, there's really just one main piece of equipment.
You're going to have to cut these batts.
And they recommend using a bread knife.
The professional insulators that I used, I used Hill Country insulation here in Austin,
Texas.
They did a fantastic job.
Their guys have a knife that they actually sharpen every day or probably even more than
once a day.
It's basically a long bread knife, although a serrated bread knife would be best.
And they're so used to working with it, it makes it super easy.
They're slicing those batts.
They're cutting and fitting.
The guys who did the ceiling here had stilts on.
And man, they just absolutely installed the ceiling super fast.
Once you get good at it, it actually flies on the install.
So very, very quick on install.
The next thing that I really like about Rockwool is that it's vapor open, meaning that there
could be some drying that could dry through there.
By having these batts in here, I could actually dry through these batts if there was some
incidental amount of moisture on the outside of the house.
That's a big deal for the northern builders who really want to make sure that there's
drying both directions through their insulation.
They don't want a vapor barrier in the wrong spot.
The next thing that I want to mention about Rockwool that I really like is that it's very
remodel-friendly.
Now, a couple years ago, I went down to help after Hurricane Harvey down to Houston.
And one of the houses that I mucked out was a house that had open-cell spray foam.
And that area of sheetrock that got damaged and where those floodwaters were, it was an
absolute mess to get not just the sheetrock out.
In fact, the sheetrock came off fairly easily.
But to get all that spray foam out, you basically had to dig it all out.
And because it was open-cell foam, it had absorbed all that moisture and it was like
a big, wet, nasty sponge pulling that out.
Now, on the other hand, one of the things I like about Rockwool is that it's hydrophobic,
meaning if we were to take a water bottle and drip some water down this batt right here,
the water would run off like water off a duck's back.
It's not going to absorb that water.
Okay, now we talked about seven pros.
Let's mention three things that could be perceived as a con.
The first one that I get all the time is, isn't this itchy?
You know, I don't find it any itchier than any other product on the marketplace.
Wear gloves, put long sleeves on, and it's really no big deal.
And the other thing I like about it is the fibers on this are very heavy and dense.
And so when I'm walking around in a house like this that's been insulated, there's not
particles in the air.
In fact, if you kind of look at the sun's rays coming through the windows, you don't
see particulate matter in the air.
And I feel like some of the other, I don't want to say their names, but some of the other
insulations that are out there in the marketplace, they do have some of that particulate matter
that's as light as air and kind of floats around.
So for instance, if I go in a standard attic that's been insulated on the flat with some
type of blown-in material, it's absolutely mandatory for me to put a dust mask on because
with my dust allergy, it's almost triggered immediately when I go into that space.
On the other hand, I've been in my house here under construction for a solid week and a
half with this rock wall in, and I've had no problems at all.
Now I'm not installing it.
Like I said, I should be wearing a dust mask if I'm installing it.
But in this case, I've had no issues with my allergy for dust triggering.
It's a very heavy particle, and so it falls to the floor fast compared to the floating
particles.
Another downside I had to think about for this house was this won't stick in any locations,
which means that this friction-fit bat is going to work great and stay in place, but
ultimately it's going to rely on the sheetrock to keep it in place.
On the other hand, in my attic where I use rock wall right in my rafters, I had to do
a very good job of pinning it into place.
I used some strips of some cloth, and I also used some tiger paws, which is basically a
metal clamp, to hold that in place.
But I had to think about how it would hold.
Also in the band joist areas of my house, that's the areas where I've got insulation
in my floor joists, where my floor joists come out and stop on my walls, that'd be an
area that spray foam would work because it's going to stick in there, but bat insulation
needs to be pinned in there.
Now that seems like it'd be a downside, but in fact, I think it's actually a benefit to
not have it stick because I think I want that remodel friendliness.
I'm thinking about this house as one that might get passed down to a future generation.
I might have grandkids that live in this house someday.
If they remodel, I'd like for them to be able to take that insulation out, do what they
need to do, change the wiring, do whatever, and put it back.
If I were to use spray foam in that place, it would've been locked in place on that band
joist.
The other downside that I want to mention is there's no air sealing benefit to this
material, so we can't put this into an area that was leaky, meaning if I had an outlet
on this exterior wall and the outlet wasn't sealed, I could get airflow through this insulation.
Now that is something you need to keep in mind when you're building the house, and in
my mind, the biggest thing you need to do is do a good job of all of your air sealing
prior to insulation, and don't rely on spray foam or other insulations as a crutch to air
seal when really, insulation should just be holding that heat or that cold back, and should
not really be necessarily for air purposes.
Now I am talking out of both sides of my mouth here, though, because right below my feet
in the ceiling of my garage, which is underneath my decking here, I use closed-cell foam up
against the bottom here.
The reason why I did that was I did want a little bit of that extra air sealing benefit
between the house and the garage, and I also wanted to make sure that my insulation was
going to stick to the underside of my subfloor.
So in the long run, my entire house is about 90-plus percent, 95% rockwool, but I've got
a little bit of closed-cell at my feet here where my garage ceiling has been insulated
with 3 inches of closed-cell foam, and there's one other spot in my house, which is my pop-up
stairwell where I only had about 4 inches of total depth, and I wanted to be able to
get as much R-value out of those as possible, so I insulated that with closed-cell.
But in the end, I am really, really happy that I did rockwool everywhere.
And you're going to notice that basically every interior wall of my house has rockwool.
On these walls, you're going to see the R-value, and on these walls, you're going to see their
logo, meaning that's their safe and sound vats.
And that's going to be the last thing that I want to mention here today, is how to bid
this project.
If you've got insulation coming up, definitely ask for rockwool.
Fantastic product.
I mentioned all seven of those benefits that I think really set it apart from the competitors.
But it is more expensive sometimes than standard insulations, so don't just have them substitute.
You actually want to ask for rockwool by name.
And lastly, consider insulating all of your interior walls and potentially most of or
all of your ceilings where you've got connected spaces.
In my bedrooms, in my family room, in the rooms that are separating my bedroom, my master
bedroom let's say, from my living room, all those made perfect sense for me to do the
safe and sound vats.
And these vats are a little less expensive as safe and sound than they are the true insulation
vats on the outside of the house.
So for a little bit more incremental money, a ton of benefit on sound.
Hey guys, one of the things that I like about rockwool that I've mentioned is I like that
you can actually write on it.
Let's say if I was hanging a TV on this wall and I needed to make a measurement, I could
actually use a sharpie on here or Milwaukee markers, which I actually use all the time.
And check it out, you can draw on that insulation and it holds it real well.
Which means that it also takes paint really well and this is incredibly useful for a builder.
Check this out.
This wall right here, I actually didn't need to make this mark, but I do need to make this.
This wall here is getting sheet rock and not quiet rock.
So I marked a bunch of my walls SR or QR and look, that rockwool shows up perfectly with
that orange spray paint and takes it really, really well.
And that is a benefit for me as a builder.
Good job, rockwool.
Looks like a butt more than a heart.
I'm not a very good heart drawer, am I?
Before we close off the video, let me grab my sound meter and I'm actually going to see
if we can test what that sound benefit is.
All right guys, a little rockwool sound test.
If you just look at my voice when I talk, although I am a loud talker, I'm probably
in the 50s or 60s for my voice on this sound meter.
And so when I turn the shop vac on, let's see what our sound meter reads here.
All right, so it's about 75 decibels when we're a foot or two from it.
Now let's walk up the stairs to my daughter's bedroom, which is literally right above that
shop vac.
If you can look back to see where the shop vac is, we're going to go directly above that
room.
And remember, we don't have any sheetrock installed, we don't have any interior doors
in place.
Okay, so I'm still line of sight on the shop vac, but I'm, you know, a solid 15 or more
feet away.
Let's call it 58 decibels.
Now let's go up the stairs.
Now that's directly below us.
Remember, there's no doorways in place.
I've got the rockwool safe and sound on my iJoyce.
I've got some soundbats in her walls.
Let's see what the meter says now.
Can you hear that?
You can't hear anything.
Even with my good ears, I can barely pick up that shop vac's running downstairs.
The sound meter cuts off at 40 decibels.
So it's going from 70-ish, 68, 70-ish, to below 40 on the sound meter.
30 decibel drop, no doors installed whatsoever.
That is what I was telling you about sound attenuation.
Incredible product.
All right guys, that's really it for today's build show.
Hopefully you learned something about rockwool that you haven't before.
These guys have been a show sponsor for me for a long time, but one of the things I like
about these guys is they've allowed me the freedom to use other types of insulation wherever
I thought was best in the project.
At this house, I could have used whatever I wanted, wherever I wanted.
But I chose rockwool, as you saw, for about 95% of my house, and I'm so thankful I did.
This is a really good product.
I'd highly recommend it for your house.
For more information from those guys, I'll have a link in the description below.
If you're not currently a build show subscriber, guys, hit that subscribe button.
We've got new content here every Tuesday and every Friday.
Follow me on Twitter or Instagram, otherwise we'll see you next time on The Build Show.
