This process is a game changer for building an efficient home

Matt Risinger
48 followers
Dec 6, 2022
This process is a game changer for building an efficient home
You know, it's not often that I come across a product
that I would put into the category of revolutionary,
but on today's Build Show, I've got a product
that I think is absolutely gonna change
the way houses are built in America
when it comes to efficiency,
indoor air quality, health, and comfort.
On the Build Show today, we're gonna be talking
about a revolutionary product.
It's actually a process that I think is dramatically
gonna change the way houses are built in America.
We're gonna be talking specifically about AeroBarrier.
I saw these guys at the International Builder Show,
and I wanted to do a first house with them.
And in fact, this is the first house
that's ever been air sealed in Texas
with the AeroBarrier system.
But before I get into all the specifics
on how it was done on this house,
let me tell you why air sealing is so important.
I get tons of comments about houses being built too tight.
Air sealing is critical to me as a builder.
Here's why, there's four control layers
every house needs to control.
Number one, water.
If water gets in, forget about the rest
of what we did as a builder.
We're gonna get a lawsuit, we gotta fix it.
It's a huge deal for us, so we have to waterproof.
Number two, air.
When air leaks in, all kinds of bad things come with it,
and we're gonna have a really hard time
delivering a healthy house and a comfortable house
to our clients if air can leak in uncontrollably.
Number three, we need to control vapor flows.
Especially important for those northern builders up there,
because it depends on where that vapor barrier
needs to be on the wall, depending on the time of year.
So it's a little bit trickier to control vapor.
And lastly, houses need to control thermal.
That's the insulation in the walls, that's the heat flow.
Now that order of all four of those, super important.
You're never gonna get a call at 2 a.m. from a client
saying that your house is leaking air,
but you're sure gonna get a call
if your house is leaking water.
But right behind waterproofing is air sealing,
and it's super important to me as a builder,
because as a remodeler, I've seen tons of houses
that had a bunch of condensation
in the back of the sheet rock,
which led to moisture and mold and all kinds of bad things.
And remember, when that air leaks in,
it's gonna bring with it pollen
and all kinds of other nasties.
And if air can leak in,
typically those bugs can get in as well.
So air sealing is super important.
All right, so here's what we're doing here today, guys.
We brought the air barrier guys in all the way from Ohio
to do the very first Texas house with their system.
Now, this is a revolutionary system.
I think it's incredible.
Let me walk you through it start to finish.
Now, first, we started with a pretty tight house over here.
We actually did a pre-blower door test on this house,
and we tested this at one ACH 50.
But we wanted to be much tighter than that if we could,
and here's where their system comes in.
So what they do is they set up these nozzles
around the house on a tripod stand,
and you're gonna see these multicolored cords
kind of running throughout the house.
Now, these nozzles are gonna spray an acrylic product,
basically kind of like an aerosol caulking into the air,
a very, very fine caulking
that's misted throughout the whole house.
And then at the same time,
they're gonna pressurize the house
with the blower door running in reverse,
meaning that we're gonna push air into the house.
And then all those little cracks and crevices
on those small places that might leak air,
that mist that's in the air of this,
basically the acrylic caulk that's floating
is gonna start accumulating.
Now, I ran a really cool test.
I've got a door over here set up
where I've got an air conditioner coming through,
so we've got a piece of plywood in there
for temporary job site conditioning.
And I cut three holes in that door.
I ran a small hole, a 3 1⁄8-inch hole.
I put a kerf cut on a saw,
and then I ran a big two-inch hole saw over there,
and I put a screen door material over top of that.
And as the test runs, as this aerosol accumulates,
check out what's happening over here.
The hole, the 3 1⁄8-inch hole, was totally glommed up.
Basically a big, almost like a snot ball of this product,
totally sealed that hole off.
And in fact, they tell me they can seal
up to a 1⁄2-inch hole.
The kerf cut, again, almost looked like
I put a direct bead of caulking on that kerf cut,
but I found this super interesting.
This is that screen material,
and look how it accumulated on the screen here.
You can see the back of the screen right here
where you can still see the screen,
and that white material from AeroBear
just totally clogged up all those holes.
And on the front side, it looks like just a white circle,
almost as if it had been caulked over.
My understanding is this actually happened pretty quick,
and that's basically what's happening
throughout the entire house.
Now, this is a pretty tight house to begin with,
but of course, there's all kinds of tiny
and minute cracks everywhere,
and that's what leads to that loss or that gain.
And remember, when that air leaks in,
it's bringing with us all kinds of things
that we don't want.
So if we can't make a proper envelope for our houses,
we can't truly condition and serve our homeowners
with healthy air on the inside.
Now, of course, people are gonna comment,
this house is too tight.
Don't forget, guys, this is brand new construction.
I've got a fresh air system.
It's gonna run through my ventilating dehumidifier
so I can drop the humidity out.
It's gonna run through a giant media filter
so I can take out all the pollens and all the nasty stuff.
And then I can bring in air on my terms
when I want that air, not just when the air is blowing.
And it's not gonna be filtered through my stud bays
where I might also get some particulate matter
or some fiberglass or whatever it is in those stud bays.
So this is an incredible process.
Now, again, we started with a very tight house,
and they ran this test for about 90 minutes start to finish.
And at the end of the 90 minutes,
guess what my score was, 0.3 ACH50.
Now, if you're not a nerd out there,
you don't know what that means,
but let me translate that to code.
Code requires us to have a tight envelope
that in the north is a three ACH50.
So I'm actually a one before I started, a 0.3.
I'm 90% better than code
if I'd built this house in the north.
Down here in the south where I am,
I only need to make a five ACH50,
and now I've got a 0.3.
So this is a much, much tighter house
than what even code requires.
All right, now I wanna bring on Sean Harris.
Sean is actually one of the local guys
that you've seen in my videos before.
And Sean helps me on all kinds
of different things in my houses.
But Sean, you ran with the AeroBarrier crew
from Ohio today in doing this install.
I know one of the questions we're gonna get is,
what is this cost?
How would you answer that question?
Well, Matt, the price varies dramatically.
We're not talking about hundreds of dollars.
We're talking more of thousands of dollars.
But it really depends on the square footage,
how much leakage there is.
If you're starting at a 10 ACH50,
that would be one thing.
Trying to get 10 down to 0.5 or lower,
it's gonna be quite challenging and time-consuming.
Not everybody can build a one ACH50 house
to start out with.
So Sean, as you've seen this now in person in my house,
how would you see other builders maybe using this process?
I think this is great.
It's gonna be able to have people rethink
that the materials that they're using
for air sealing, for example,
you could go with AeroBarrier,
and then you wouldn't need to use spray foam
as your air sealant.
You can maybe go with a more cost-effective
insulation that way.
Yeah, and you know, another thing
that I was thinking too, Sean,
is I don't know if you saw my Zip 2.0 videos,
but we could use the Huber Zip system on the outside,
which is already a pretty airtight system.
And then we could hang either our AeroBarrier
or our drywall on the lid,
depending on where you are in the north versus the south.
And then prior to insulation,
you could actually come in
and spread this AeroBarrier system.
Would that work?
That would be great, Matt.
And what's really great about that
is that you can then quantify the results
of the building envelope
before you start adding insulation
and things that would cover those things up.
You already know that you're passing at your final
or what your leakage scores are.
It's this repeatable process.
A turnkey solution that can really
benefit everyone involved.
Sean, tell me, would this work
on a remodel situation as well?
Yes, sir, definitely.
Remodels are great.
There's a little more prep involved in remodels
as far as covering the floors and things.
In this particular case,
we've got some plywood down that's under the subfloor,
so we're not gonna worry about needing to cover that.
But in a remodel situation,
more care will have to be taken.
Yeah, because this aerosoled caulk
is gonna land on those horizontal surfaces,
you either need to have a rough surface like this
that we're not worried about,
it's gonna be covered later,
or you could cover that.
But that's, honestly, I think that's something
that's gonna come into its own on this product
in the next couple years
is really we could see every house that gets resold
come in and air barrier it.
And then 1970s, 1980s, 90s house
that's pretty leaky, not super efficient,
you can come in and tighten the heck out of that house
and get guaranteed results just like we had today, right?
Definitely, absolutely.
That's impressive stuff.
Sean, how can people find out more about Aerobarrier?
They can go to aerobarrier.net
and they can see if there's a dealer in their area.
A lot of this is brand new to a lot of the country
and so you'll have to see if there's one in your area
that can help you out.
Yeah, that's my understanding
is that things are really just getting set up.
In fact, that's why I was the first house in Texas.
We don't really have all the infrastructure
in place quite yet, but stay tuned for this.
Be on the lookout for an Aerobarrier dealer in your town.
If you're a builder or a modeler, architect,
this is something that's really gonna be
a game changer out there.
Sean, thanks so much for coming out
and spraying this house for me.
I think the results are incredible.
I am super psyched.
And in fact, this is the tightest house
I've ever built officially now
with that blower door score of 0.3ACH50.
Guys, for more information on this process,
check out that link in the description below.
Otherwise, follow us on Twitter and Instagram.
We'll see you next time on The Build Show.
