DO THIS Before you Drywall Your Remodel or New Build

Matt Risinger
48 followers
Dec 3, 2022
DO THIS Before you Drywall Your Remodel or New Build
On the Build Show today, we're going DIY.
If you're building or remodeling a house,
we've got three ways that you can prevent termites,
cockroaches, bugs, and even mold from happening,
all for $200 or less.
On the Build Show today,
we're coming to you from a remodel project,
and I'm gonna show you three ways
that you can prevent termite damage,
cockroaches, small bugs, and even mold from happening
with just three steps,
and all this is gonna cost about 200 bucks
for a standard size remodeler house.
So let's get going.
We're gonna be talking specifically
about three different products,
and the bulk of the heavy lifting
is gonna be this right here.
This is called Boricare.
We're gonna get into that in a second.
We're also gonna be using some boric acid,
and this is gonna be specifically for cockroach prevention,
and then we're also gonna be using some caulking.
Now, there's a bunch of different options on this.
We're gonna get all that later,
but all combined, for this 1,500-square-foot remodel
we've got going here, we spent about $200 in supplies,
so this is pretty affordable.
Now, I do wanna mention that this Boricare
that's gonna be doing the bulk of the heavy lifting for us
when it comes to bug prevention and termite proofing,
this is a product that,
if you're doing it for someone's houses,
for me as a builder for sale,
I need a licensed pest applicator to do this,
but because I'm doing this for one of my project managers
who's remodeling her house, we're not charging for this,
and so this is totally legitimate,
as far as I know, in all 50 states.
Check into your local rules,
but if you're doing this on your house
or your friend's house or your parent's house
when you remodel or build,
you can use this product yourself, no licensing needed.
Okay, so what is this product that we're using here?
Boricare, as the name implies, there's borates in here,
and borates are a naturally occurring mineral.
In fact, it's mined really in two places in the US,
and if you're familiar with the term 20 mule team borax,
that's a laundry additive
that your grandmother may have used,
that's basically the same ingredients going into this.
It was originally mined in the early 1800s in Death Valley,
and it was pulled out of those mines with 20 mule teams,
and that's where the name comes from,
but it's also mined in California.
This is basically a salt that's been dissolved
or in solution here,
and when you buy this one gallon here,
it actually makes six gallons of product.
Now, this one has mold care with it as well.
You'll notice there's two compartments or two lids here.
So this is the boricare, which is the big compartment,
and then this mold care, which is basically a biocide,
has been added on this as well.
Now, if you don't want the mold care,
you can also buy this as just plain boricare.
It's gonna be a little less expensive,
but this bottle cost me about $110 on Amazon.
Just about everything we're gonna talk about today,
there'll be a link in the description below
if you wanna see that.
Now, you can get this without the mold care version
for about 80 bucks, so about a $30 savings,
and basically what you're gonna do
is you're gonna mix this up
and you're gonna spray it on the framing.
Once you spray it on the framing,
the wood, because it's a product that will absorb water,
it's gonna absorb this mineral, this crystal,
into the wood fibers,
and then if termites were to visit your house
and start chewing on that wood,
they're gonna ingest those borates
and it's gonna kill them pretty rapidly.
Now, the reason why I like this in particular
is because it's really not very toxic for humans.
This is a pretty safe product,
and in fact, most green building programs
list this as the best way to termite-proof a house.
Much, much better than, let's say,
dumping a bunch of chemicals on the ground
before you build your slab, which is a usual method,
which, in fact, I did for many years.
And another method is bait stations,
which you have to renew often.
This one, on the other hand,
is gonna last for the lifetime of the house.
So, let's spend a few minutes
on how we actually did this process on this house.
I wanna give you some of the specifics
and show you how easy it is.
So, first of all, we need to mix it up.
It's a little annoying that it requires six gallons.
You can't use a standard five-gallon bucket.
So, what you wanna do is fill
your five-gallon bucket with water,
and then I used a trash can,
basically a kitchen trash can that was 10 gallons.
You're gonna pour about four gallons into that trash can,
and then you're gonna use a mixing paddle
with your cordless drill.
It's really important to mix this product up,
and it takes, in fact, about five minutes of mixing
to really ensure it's mixed in thoroughly.
You'll notice when it dumps out into the water,
it's real thick, it's kind of a syrupy.
It's like you're putting maple syrup into the water.
So, it really needs to be totally mixed up
into that solution.
So, like I said, do four gallons,
dump all this in, mix it for a couple minutes,
and then, with that one gallon that's left over
in that five-gallon pail, you wanna triple rinse this.
You wanna really make sure
that you've gotten everything out of the can
and you're using all the product.
I think they also want you to triple rinse it
so that this is safe to put in your recycle can.
The kids aren't gonna get any of that biocide on them.
So, basically, by triple rinsing it,
dump a little bit of that one gallon that's left in there,
rinse it up real good, dump it,
do that three times, and you're gonna be all set.
Now, make sure, like I said, you go five minutes in total,
and once you do that, you're ready to go.
Now, let's talk about PPE, personal protective equipment.
If you're just using regular BoraCare
without the mold care, there's really not a lot you need.
Long sleeves, long pants, they recommend you put gloves on
and you have some basic eye protection,
but it's pretty inert, pretty safe product,
not a lot you need.
If you're in an enclosed area, though,
you do wanna use a respirator.
Now, because this one has a biocide,
I took a little bit more precaution.
I wanted to be really safe.
I put a Tyvek suit on.
Basically, a full body suit.
I've got boots on.
I've got full glove protection,
and now I'm gonna use more like a splash goggle,
like a chemical-resistant goggle,
and I don't want any of this getting into my eyes.
Now, I didn't wear a respirator
because I'm in a big open stud area.
If you were spraying this in a crawl space, for instance,
and you were spraying up at that framing,
or let's say if I wanted to do this whole ceiling area,
I would certainly recommend putting a respirator on
or maybe even a full face shield.
You wouldn't want a lot of that coming down on your face.
But here's the process.
Once you've got it mixed up, you can use a pump sprayer,
and there's a couple options out there.
A really cheap option,
if you're just gonna do this one time,
is probably a $15 one-gallon chemical-resistant pump sprayer,
but for 40 bucks, you can get a four-gallon backpack sprayer.
I happened to pick this one up on Amazon for $40.
It's a Roundup version.
I think I'll use it in the future,
so this was a good buy at 40 bucks,
and now I was able to dump four gallons of the solution in.
Once I had my PPE on
and I had the solution in my backpack sprayer,
pretty simple process.
We're basically gonna coat the entire house
two feet and below.
That's really for termite protection.
The termites are gonna come up through the slab
and any cracks you might have, through your basement.
If you have a basement house,
they might tunnel on the outside of your house
up until they hit some wood framing.
So we really wanna make sure
that we get everything two feet and below soaked.
Now, you can do this in a variety of ways,
but basically the way I like to do it
is I wanna picture frame each one of the stud bays.
This house worked well
because we had a two-foot sheathing break.
In fact, we used the method that I like,
which is where we use pressure-treated plywood at the bottom,
and so that pressure-treated plywood were good.
There's not gonna be any termite damage there,
but we wanna make sure the studs, for sure, are well-coated.
And because this is the mold care product,
I wanna go higher in anywhere
that there could be any moisture.
Areas where we've got plumbing in the house,
where we've got bathrooms,
I'm gonna actually go up to the eight or nine or 10 foot,
whatever the plate line is,
and coat the entire stud, the entire sheathing.
What this is gonna do
is it's gonna put a protective film, basically, on that wood.
And of course, we've got the termite treatment
because it's gonna soak up.
That borate is gonna soak up in there.
But the bio side is actually gonna help that wood
that if moisture happened,
let's say we had a water leak, we had a window leak,
it's gonna make sure that mold won't form
on the stud surface.
Now, you can actually use this
on the back of your sheetrock as well.
Let's say if you're doing a remodel, like we were here,
we had some areas that sheetrock was already installed.
We're able to spray the back of the sheetrock.
Anything that's cellulose-based,
which is basically wood fibers,
we wanna spray that and treat it and protect it.
If you really were mold-sensitive
or you're really worried about mold,
you could actually even treat your drywall
before you installed it.
You'd wanna do both sides
and you wanna let it dry before you install it.
But if you really had some mold sensitivities,
that could be a way to go as well.
Spend some time, especially in your bathroom areas,
paying attention to making sure you get it
on the concrete slab or whatever is your subfloor
by at least a couple inches.
Pay attention where you've got hold-down bolts,
where you've got electrical wires,
all those sorts of things.
We wanna make sure everything gets a really solid coat.
You don't want it running off.
If it's not soaking up and running off,
that means you've gone too heavy.
But I did use the red spray tip on this,
which is the high-flow spray tip.
Don't use the low spray tip.
And on this remodel, like I said,
it was about 1,500 square feet.
I was easily able to coat all those areas
with the six gallons.
And in fact, I had a little bit left over.
Now, if you've got some left over,
you're gonna dump it at the end
because you don't wanna hold it in your tank overnight.
It's gonna start to crystallize in the tank.
It's gonna ruin your sprayer.
So just use what you need at the time.
Buy how much you need and use it all
in one application and one setting.
And remember, you wanna keep the house dry after that.
If this was an outdoor area,
let's say this was a shed or maybe a pergola
that was gonna get wet,
eventually that water is gonna leach it out
and it's gonna lose its effectiveness.
But because this is a framed house,
it's been dried in,
as long as this house is kept dry, we're good to go.
Okay, number two,
now that you've got the Boricare with mold care on the house,
the second thing that we're gonna do
is a borate acid treatment.
Now, this is really for cockroaches
and you're gonna use this
anywhere you've got voids in the house.
And I typically would wait to do this
maybe until insulation is installed,
but in this case, the insulator hasn't arrived yet.
So we're gonna run it in all the places
that we know we can hit now.
Underneath all of our tubs,
I'm gonna put it at the base of all of my interior walls.
If you had, let's say, an unconditioned attic,
meaning a ventilated attic that was insulated,
you could spray it up there as well.
Anywhere that you might have cockroaches
or some area that's a void in the house,
that's a great place to put this boric acid.
It's gonna keep the cockroaches at bay and kill them.
And again, it's totally safe around kids and pests.
This is a naturally occurring mineral.
All right, the third and final step,
and really a very critical step
for all the other pests in the house,
is to do some air sealing.
And one area that I've found that's super leaky on houses,
especially Southern US houses,
is the connection between the framing and the slab.
All right, now, if you're a pro like me,
you're gonna use a product like this.
This is Tremco's Dymonic 100.
And you may not have seen this before.
This is a sausage tube.
So you've got 20 ounces in here,
and you're gonna use a sausage gun
that when you're finished,
very little waste from this leftover.
This is a particularly good product
because of its movement ability.
You've got a ton of joint movement,
and this product is gonna move
with the house swelling and shrinking over time
and make sure it doesn't break its seal.
But most homeowners, do-it-yourselfers out there,
are gonna have just a standard caulk gun.
And that's why I'm gonna recommend for this video
DAPS DynaFlex 230.
This also has some ability to flex and move.
And what you're really trying to do
is seal that joint between the concrete and the wood framing.
You know, as you look at the house
from your six foot height down, it looks really tight.
But believe it or not,
there's a lot of air leakage in that area.
And anywhere that air is gonna leak in your house,
that's a really good inlet for bugs.
Remember, the air that's leaking in or out
may be cold in the summertime and attract those bugs,
or may be warm in the wintertime
when those bugs wanna get in there.
So this is gonna do a world of difference for your house,
both from energy efficiency
and from standard bug proofing.
This is ants, this is cockroaches,
this is all those little things
that might get in there anywhere air might leak out.
Thanks for joining me guys.
If you follow these three steps
on your next build or remodel,
you're gonna make a big difference
on the longevity and durability of your house.
You're gonna prevent termites
for the lifetime of the house.
You're gonna keep those cockroaches at bay.
All those other little bugs
are gonna be prevented from getting in your house.
And as a side benefit,
you're gonna have some energy efficiency boost
and you're gonna make sure you don't have mold growth
in the case of some water leaking in.
Everything we talked about today
is gonna be in a link in the description below.
And if you're not currently a subscriber,
hit that subscribe button.
We've got new content every Tuesday and every Friday.
Otherwise, we'll see you next time on The Build Show.
