Mistakes Happen.. | Poor Man's GTR [EP13]

Broken Silvia
74 followers
3 Video Views·Dec 22, 2019
In this Episode I go through all the mistakes that I made while painting the R34 Skyline, and also talk about what I would do differently. I know this will be one of the least entertaining videos in this build series but I am sure a few people that might be thinking about tackling a job as such will appreciate it! Hopefully next week there will be another video where the car is a rolling shell..
_________________________________________
My Instagram: @broken.silvia
Contact: [email protected]
Produced by: Damjan Bradonjic
Hey everyone, my name is Damien and welcome back to another episode of Broken Sylvia
even though the channel's mainly been about the Skyline. So, I promise we're going to get back
to this car very, very soon. We've been doing a bit of work on it behind the scenes to try
and get it running kind of soon but this car is priority and I don't want to get the builds kind
of mixed and matched like you see an episode of the Skyline then you see an episode of the Sylvia.
So, even if this car is running before the Skyline, I'm not posting any videos before
this build is done which should be the next few months. Anyways, that's not what the purpose of
this video is. The purpose of this video is, as I said, it's going to be more of a raw vlog style,
me talking about things I would do differently, things I've stuffed up on, just showing the side
that social media doesn't usually show. So, even my videos, I do try to promote quality
and entertainment and try and motivate a few people to give it a crack themselves because
firstly, if you have the time to do it, it's going to save you a lot of money and you get
greater satisfaction doing it yourself. You also learn a few things along the way.
So, I've got notes because I tried to film this video last night and it absolutely sucked. We've
got a proper microphone set up this time. I know this place is huge and it does echo
but hopefully, the microphone will fix the audio issues a little bit. My voice is still a little
bit hang on but yeah, we'll get through it. The layout of the video will be, I'm going to talk
about what I would do differently or I stuffed up and then I'll put the videos over the top to at
least try to make it a little bit more enjoyable and also, when I explain things, it's easier when
you have a visual representation as well. Alright, so, the first thing I would do differently and
that is, you know when the car was in primer and I was blocking it back with a 320, I would still
block it by hand with a 320 but instead of wet rubbing it with a 600, I would actually just get
a little palm sander with an interface pad which is just a piece of foam and a dry piece of sandpaper
such as 600 grit. So, the reason with the wet sanding is just to remove the 320 marks for them
to be smooth enough. Now, I would ditch that 600 wet and dry method and I would just go straight
to the palm sander because once you're done with the 320 grit, the blocking by hand, the panel's
nice and straight. The 600 is not going to get that panel any straighter. It's already straight
so the purpose of the 600 is to remove the 320 grit sand marks to get them ready for paint which
means totally doable with the Whizzer and it would save you a lot of time. So, that's the first thing
I'll do differently. Second question is to do with the spray booth. Now, why did I spray this car in
the spray booth and I sprayed this car under a gazebo? Well, at the time, I didn't really want to
hire a spray booth. Well, this time around, I didn't want to paint it even though I've got this huge
workshop to paint a car in. The main reason I didn't want to spray it here is I didn't really
have the time to build a mini spray booth like a gazebo version and also I didn't want to destroy
these floors because I know Zed, the landlord, would probably kill me. So, yeah, I didn't want
to stuff up the floors and for the sake of 500 bucks, that's the next question, how much was
the spray booth high? It was $500 for about four sessions. So, the car was in the spray booth at
the spray shop for about seven to ten days. I was in and out. I had a few exams to do and stuff so I
couldn't be there every single day and that goes to my next point. It's very inconvenient. You have
to get the car trailered there. Luckily, we actually ended up buying Scott's trailer, Harry, Danny and I
so that didn't cost us anything but again, if you have to pay for a tow truck to get your car to a
spray booth, that's an added cost. So, yeah, the whole spray booth thing and I'm not very happy
with how it turned out out of the spray booth either. It's good. It's very easy to remove the
dust. Super, super easy. The whole car needs to get wet sanded and polished up anyways but to be
honest, as I said before, this car turned out cleaner under a gazebo than this one did out of
a spray booth which makes absolutely no sense but that's just how it turned out. So, yeah, the
upside of the spray booth was good lighting. You could see what you're doing even though I did miss
a few sections but we're going to get to that as well. Moral of the story with a spray booth, what
I would do differently, I wouldn't go to a spray booth again. I would get a gazebo with some
plastic sheets on the floor and just wing it. So, it saves you money. You can do it at your own
workshop if you have the space to do it and another thing I would like to add is two-pack paint
spraying. Spraying two-pack paint in Australia is, I think, illegal unless you're in a spray booth.
So, the next question is why did you paint the car with the panels on? I've gone through that
in the previous episode. I'll give you a two-second version of it. Pretty much, when I was walking
across the whole car and painting it, that ensures that every single panel will, from front to back,
will have the same shade of bayside blue and there's no differences in colour. So, that was the
main reason but what I've realised is the week after when I went to spray the
bumpers and the side skirts that they were painted off the car, totally different weather, totally
different week, not the same day and they turned out the exact same colour as the car. So, that just
goes to show that you don't need those panels on the car to get a nice even finish. Now, that leads
to my next point of why I would do it differently. So, if the doors were off the car, what would that
allow me to do? That would allow me to spray the inside of the doors and the outside of the doors
at once, the same day and that would also allow me to spray the outside of the car and the inside
of the door jams at once. What does that mean? That means that you save yourself a lot of time
in masking and you get an overall nicer finish. So, that's another thing I would like to change.
It would definitely, instead of spending four days in the spray booth, you would probably spend
two days in the spray booth. So, there you go. That's another thing. What gun did you use and what
were the settings? The gun was a DeVilbiss. I'm not too sure about the settings and this is another
thing I would like to change. So, if I were to do it again, I would get a little air rag on the bottom
I'm pretty sure the higher the pressure, that means the less orange peel or the less textury finish
you're going to end up with and as I'm about to show you guys, this car is very, very textury
but that's fixable. How you fix that is you wet sand the clear coat and you buff it up
which is an easy fix. It would have to be done anyways. So, it's not that big of a deal but going
back to what I'm saying is if I had a little air rag on the bottom of the gun and I could control
the amount of pressure and maybe even go faster with my arm speed, I think I could have got a lot
nicer finish off the gun such as the Silvia. So, there you go. That's another thing. Also, the gun,
what I did like about it is it did spray quite nice and the cup system, I think it's like a 3M
disposable cartridge cup system. I'll put some photos in. I absolutely love that. You don't use
a traditional pot where you have to clean it out after every use. You just throw it in the bin,
clean the gun out and put another one on. So, going from white, blue to clear takes 20 seconds.
You just flush the gun out with a bit of thinners, put your new pot on and you're good to go.
So, what brand of paint and how much paint did you use? So, the brand of paint I used is Protek.
It's made by PPG. I'm pretty sure it would be Australia only. So, if you're in the US,
I don't think you'd be able to get your hands on it but again, you can just use PPG.
There's many, many other good brands out there but do make sure that you stick to 2-pack. Don't
use acrylics. Don't use your enamels. You're just wasting your time. The 2-packs are way more
durable. You get a nicer finish. So, yeah, definitely use the 2-pack. And how much paint
was used? So, we won't worry about the white ground coat even though about 6 litres was used
but in terms of the base side blue, 7 litres of paint was used. So, that's 7 litres before you
mix it. So, obviously, it's a 1 to 1 ratio which means 7 litres of blue goes with 7 litres of
thinners. So, you get 14 litres in total which is quite a bit of paint but do remember that this is
a full colour change. The engine bay, the outside of the car, the inside of the door jamb, the
inside of the boot, all of that got painted. So, we did go through quite a bit of paint
and now going back to what I would do differently again is for example, I used a white ground coat
and again, I'll go back to the reason why I did that. I used the white ground coat because when
you put the blue over the top, you get this nice light base side blue colour. If I used a darker
ground coat and put the blue over the top, the base side blue would be a little bit darker. Now,
what's the advantage of going for a darker ground coat? The advantage of that is when you go to
cover it with the base side blue, it takes a lot less coats to cover over a darker colour as opposed
to the white colour which means you'd save yourself maybe one, one and a half litres of paint
and if you're in a bit of a budget, that could, you know, be $100 or $200 even though I definitely
wouldn't be cheaping out on paint because once the car is painted and if you've done a good job,
this finish will last you many, many years to come. Man, we're getting through this. Information and
knowledge. Where do you learn to work? How did you learn to work on cars? And again, we'll just
stick specifically to this. So, it all started with Dad, got into cars, then you find out about
channels such as Mighty Car Mods and you're like, normal guys working on their cars makes you
believe that you can do it. So, that's kind of where it started. Now, I find a lot of motivation
from other YouTubers, BS4Build, a dude that started with working on a BRZ, had no clue what
he's doing and now he's just built a twin turbo LS Lamborghini. So, that just goes to show that
if you don't have a clue what you're doing, if you start chipping away at it and doing it,
you can learn a lot along the way. So, yeah. Again, sticking specifically to the paint side
of things, I think the best YouTube channel would be The Gunman and the guy's actually from Perth.
Now, what I would do differently is I would go back and watch The Gunman videos before spraying
this car because this was my first time ever spraying a metallic and I'm sure I could have
picked up a few tips because a few of the panels didn't turn out as nice as they could have just
because of one silly mistake that I'm going to get to. So, yeah. Definitely, if you're looking
at a lot of paint information, The Gunman, the guy's a professional in the trade. He does that
for work. He's a very honest dude. So, just go check out a few of his videos and you'll get a
hang of it. All right. So, now it's time to look at all my mistakes. Now, we'll start with the
side skirt. The side skirt was so, so stupid of me. The bottom of the side skirt fully covered in
bayside blue looks amazing while the top of the side skirt looks cool until you find a small
little strip that I totally missed to paint. I totally missed a strip that you can still see a
little bit of the primer through and maybe a little bit of the white and that is just, I didn't
position the side skirt properly on the rack and I totally missed the spot. It was hot. I was rushing
and that just goes back to the whole spray booth thing. I was under the pump to try and get this
car out and all my parts out of there as soon as possible. So, again, if I did it under my own
conditions in an environment I feel comfortable in, a mistake like that definitely wouldn't
have happened. The second mistake is the mirror. Now, the mirror actually got dropped the first
time I painted it. It hit the floor. So, I had to re-sand it and then I put a bit of blue over the
looks amazing and then I go to clear coat it and guess what I do? I totally miss a patch where I
need to clear coat it. So, there's a dry spot on the inside of the mirror that needs to be redone.
So, that's two mistakes so far. Then we have the next mistake which is the front bumper.
No big deal. Some of these parts in there have a few little dry spots. You can't really help it.
It's really hard to get a gun in there. No one's ever going to see it but I'm just, again, pointing
out what I made a mistake on. Also, when I loaded the parts up, there's just a little piece there
that I damaged. So, that just goes to show, yes, you are excited to bolt this car back together
but it's very important when you're transporting these parts that you really do make sure that
you mask them up properly which I didn't. So, now the biggest mistake of the car which is
this poor little bonnet. It's an original R34 GDI V-Spec II bonnet so it's a full carbon fiber
bonnet but I made it look the worst on the car. Not the end of the world. Under these lights,
it looks horrible. Outside, you don't even notice it but let me explain. This bonnet made the car
look like a zebra and how I did that is I put the white ground coat down and then I put two or three
layers of the blue over the top. Now, about the third layer, I don't know why I did this. I should
have gone back and watched some gunman videos. I started caking on the blue color and what does
that lead to? That leads to stripiness. What you're actually supposed to do is you're supposed
to go a little bit heavy, I believe, on the first two coats and then the third and the fourth coat,
you should really let off and just dust on the color which is the total opposite. I went third
and fourth coat super, super heavy and left stripes behind. Once I clear coated it, I didn't
see it in the spray booth. The lights there just aren't good enough to pick it up even though the
first time I realized it is on my Instagram video. For some reason, my eyes thought my phone could
pick it up and I couldn't sleep that night. I was just looking back and forth to the video
and when I went back to the spray shop the next day to pick the car up, yep, it was true that the
includes the roof and the boot. The roof and the boot aren't too horrible, it's just mainly the
bonnet. I might redo it, I might not. We've got something big planned in March that we want this
car and another car done for. I'm probably not going to redo it now but in the near future,
I'm sure I'm going to respray it again. The next issue is this carbon fiber, I believe it's called
a Nacoduct or something like that. It's obviously a part of the bonnet because it's a full carbon
bonnet. The way you do it is you mask up the carbon fiber, you paint the whole bonnet blue,
you take the masking off and you clear coat it all at once to seal it in nicely. Now,
what is the problem here and what I would do differently is my masking job was absolutely
horrible. I masked up the carbon but I might have gone a bit too far which means you can see an edge
where the old primer was. You've got blue, you've got a little edge of primer and then you've got
the carbon. It's a bit of a bummer but what do you do? I think we are actually at the end of
another video. I hope it wasn't too long, I hope the audio is good and I hope you guys are getting
used to me talking to a camera. Let me know how I went but the main reason I posted this video is
to show you guys that mistakes happen. If you're going to make mistakes, you're going to learn a
few mistakes and you're going to do a better job next time. Going back from this car, from something
I had no clue what I'm getting myself into that blew out to be a huge project car and then going
into this car, blowing out to be another huge project car, cutting the back end off it, putting
the new quarter panels on, putting the car onto the road history, things I have never done before.
So, I'm not a wizard, I'm not talented. Let's just talk to people, watch a bunch of YouTube videos,
collect that information and then make up your decision on how you want to do things. I think
jobs like these are totally doable with a few friends and maybe a little bit of assistance from
professionals. One more thing I'd like to add is what's going to happen in the next episode.
So, the next episode we're going to yank the front end of the car and we're going to paint
the underside of the car. So, there's one more layer that needs to be brushed on for the undercoating
to be complete, which means we can put the fuel tank back in the car and all the freshly powder
coated suspension parts, put the new bushings in and then the car should be a rolling shell again
on wheels. It won't have brakes and stuff like that but guess what? We don't worry about that
because we have an engine to test fit in the car, do a bit of fabrication work. The engine's cooked
but we're going to rebuild it. But yeah, we're going to put the engine in, do fab work, change up
the content because I know you guys are sick of paint work as much as I am. Too much talking man.
I'll see you guys in the next one. Let me know how it went.
